Grand Hall Ob3210alp, Ob3210blp, Ob3210ang, Ob3210bng, Ob2610ang, B2610alp Owner's Manual
Specifications and Main Features
Frequently Asked Questions
User Manual
Liquid Propane Gas (LPG) Grill
Models OB2610ALP,OB3210ALP & OB3210BLP
Natural Gas (NG ) Grill
Models OB2610ANG,OB3210ANG & OB3210BNG
OB3210ALP/NG
(For Built-in Model)
OB2610ALP/NG
(For Built-in Model)
Operator's Manual
OB3210BLP/NG
(For Cabinet Model)
FREE HELP
FROM THE GRILL EXPERTS
Grand Hall is the expert on this product and
trained to help you with:
Assembly Questions
Ÿ
Grill Operation
Ÿ
Replacement of Damaged or Missing parts
Ÿ
visit www.grandhall.com or call:
1-877-934-7455
Monday - Friday 8:00am-4:30pm CST
IMPORTANT:
NOTE TO ASSEMBLER / INSTALLER:
Ÿ
Leave this manual with the consumer.
NOTE TO CONSUMER:
Ÿ
Keep this manual for future reference.
RECORD YOUR SERIAL # __________________
Ÿ
(see silver CSA label on main body of grill)
!!
Failure to comply with these instructions could
Ÿ
result in a fire or explosion that could cause
serious bodily injury, death or property damage.
Whether this grill was assembled by you or
Ÿ
someone else, you must read this entire manual
before using your grill to ensure the grill is
properly assembled, installed and maintained.
Use your grill at least 3 feet away from any
Ÿ
wall or surface. Use your grill at least 3 feet
away from combustible objects that can melt or
catch fire such as vinyl or wood siding, fences and
overhangs or sources of ignition including pilot
lights on water heaters and live electrical appliances.
THIS GAS APPLIANCE IS DESIGNED FOR OUT-
Ÿ
DOOR USE ONLY.
Never use your gas grill in a garage, porch,
Ÿ
shed, breezeway or any other enclosed area.
Never obstruct the flow of ventilation air
Ÿ
around your gas grill housing.
Never disconnect the gas regulator or any gas
Ÿ
fitting while your grill is lit. A lit grill can ignite
leaking gas and cause a fire or explosion which
could result in property damage, personal injury
or death.
Registered and unregistered Trademarks held by
Grand Hall include the following:
Grand Hall and design®, DS Grill and design®,
Crossray™ Lateral Infrared Burner Technology, Command Flame®, Smooth Start® Electronic Ignition System,
Ceramic Savor Plates®, Sear-zzler®, Stainless Clad
Therma-Core® Cooking Grids, Grand Café and design®,
Grand Mark and design®, Grand Chef and design®,
Grand Royale and design®, Globe Café and design®,
Urban Café and design®, Smokeless Grill and design®.
Patents held by Grand Hall include the following:
The Crossray Burner System by Grand Hall is covered
by Australian Patent No. 2006100635, Chinese Patent No.
960361, European Patent No. 1886606, French Patent
0607231, German Patent No. 20 2006 012 212.5, U.K
Patent GB2440714, and U.S. Patent 7,475,632.
!!
1.
Do not store or use gasoline or other
WARNING
flammable liquids or vapors in the vicinity of this or any other appliances.
An LP cylinder not connected for use
2.
shall not be stored in the vicinity of
this or any other appliance.
!!
•
•
•
•
WARNING
LPG models must be used with Liquid Propane
Gas and the regulator assembly supplied. Natural Gas models must be used with Natural Gas
only. Any attempt to convert the grill from one fuel
type to another is extremely hazardous and will
void the warranty.
Keep gas regulator hose away from hot grill
surfaces and dripping grease. Avoid unnecessary twisting of hose. Visually inspect hose prior
to each use for cuts, cracks, excessive wear or
other damage. If the hose appears damaged do
not use the gas grill. Call 1-877-934-7455 for a
certified replacement hose.
California Proposition 65
Combustion byproducts produced when using this
product contain chemicals known to the State of
California to cause cancer, birth defects, or other
reproductive harm.
Brass components on the grill, such as hose fittings, propane cylinder valves (sold separately) and
burner valve stems, contain lead which is known to
the State of California to cause cancer, birth defects,
or other reproductive harm.
This appliance, when installed, must be
electrically grounded in accordance with
local codes or, in the absence of local
codes, with the National Electrical Code,
ANSI/NFPA 70, or the Canadian Electrical
Code, CSA C22.1.
Keep any electrical supply cord and the fuel
supply hose away from any heated surface.
!
This appliance shall not be used under overhead combustible construction.
WARNING
WARNING
Never use charcoal or lighter fluid in this gas grill.
•
Failure to comply with these instructions could
result in a grease fire or explosion that could cause
serious bodily injury, death or property damage.
The Grease Tray must be visually inspected before
•
each grill use. Remove any grease and wash Grease
Tray with a mild soap and warm water solution.
Failure to comply with these instructions could
result in a grease fire or explosion that could
cause serious bodily injury, death or property
damage.
!
DANGER
!
If you smell gas:
1.
Shut off gas to the appliance.
Extinguish any open flame.
2.
!
Open lid.
3.
If odor continues, keep away from
4.
the appliance and immediately call
your gas supplier or your fire department.
2
Pre-Assembly Instructions For Your Safety
Congratulations on your selection of one of the finest outdoor kitchen appliances available. Your Grill is equipped with
the unique Crossray Infrared Cooking System® by Grand
Hall, which offers restaurant style grilling performance.
Infrared grilling technology cooks the food directly (and not
the air around it) which offers many advantages over conven
tional grilling systems:
MORE FLAVORFUL FOOD as the intense heat sears
the food and locks in the juices while also cooking it
faster which usually means more succulence.
FEWER FLAREUPS as the higher infrared heat vaporizes more drippings which also adds natural flavoring
to your food.
MORE EFFICIENCY AND CONVENIENCE as the higher
heat means shorter cooking times, more fuel efficiency
and easier year round grilling.
To begin your “restaurant quality” grilling, become familiar
with all of the cooking elements of your Grand Hall Grill lighting and operating instructions.
US Patented No.: 7,475,632
European Patent No. 1886606
Australia Patent No.: 2006100635
Germany Patent No.: 202006012212.5
France Patent No.: 0607231
UK Patent No.: GB2440714
China Patent No.: 960361
WARNING: Grease can get very hot. Always handle the Grease
Tray with a flame retardant BBQ mitt. Before removing the
Tray, always be sure that the grill has properly cooled. Be
aware that the tray does contain grease and be extremely
careful when removing the tray to prevent spillage. Failure to
follow these instructions could cause serious bodily injury or
property damage.
PRE-ASSEMBLY
Read and perform the following pre-assembly instructions:
Tools Required for Assembly:
protective work gloves
•
protective eyewear
•
Phillips Head screwdriver
•
You will need assistance from another person to
handle the grill head and other large, heavy parts.
Open Lid of shipping carton. Remove top sheet of
cardboard and packing materials. Lay cardboard
sheet on floor and use as a work surface to protect
floor and grill parts from scratches.
You may slice the carton front corners with a utility
knife to lay open the carton front panel. This allows
you to raise the Lid and remove the components
packed inside, making it easier to lift.
Use the Hardware and Part Diagrams to ensure all
items are included and free of damage.
Do not assemble or operate the grill if it appears damaged. If there are damaged or missing parts when
you unpack the shipping box or you have questions
during the assembly process call: 1-877-934-7455
M-F 8AM-4:30PM CST for assistance.
Grill Installation Codes
The installation must conform with local codes or, in the
absence of local codes, with either the National Fuel Gas
Code, ANSI Z223.1/NFPA 54, Natural Gas and Propance
Installation Code, CSA B149.1, or Propane Storage and
Handling Code, B149.2.
CSA Label
located on the
bowl rear panel
!
To reduce the chance of FLASHBACK FIRE you must clean
the Burner Tubes at least once a month in summer and
fall or whenever spiders are active in your area, and if your
grill has not been used for an extended period of time.
CAUTION
!
!!
Never cover or wrap the Cooking Grids, bottom
of the Grill Bowl, or Grease Tray with aluminum
foil or any other material that will absorb grease.
WARNING
3
Hardware Parts List for Models OB2610ALP/NG & OB3210ALP/NG
PART #
PART DESCRIPTION
QTY
PURPOSE OF PART
P06006078AHardware Pack1
S182G03061Pan Head Screw 3/16" x 3/8"2Install the Control Box
S182G03061Pan Head Screw 3/16" x 3/8"2Install the Transformer Bracket
S182G03061Pan Head Screw 3/16" x 3/8"2
S182G03061Pan Head Screw 3/16" x 3/8"3
S182G03061Pan Head Screw 3/16" x 3/8"3
For use in assembly of Model OB3210ALP, OB2610ALP,
OB3210ANG & OB2610ANG
Install the Bracket with LP Regulator
(Model OB3210ALP, OB2610ALP Only)
Install the Tank Tray Set onto the Bottom Panel
(Model OB3210ALP, OB2610ALP Only)
Install the Bracket with NG Regulator
(Model OB3210ANG, OB2610ANG Only)
Hardware Diagram for Models OB2610ALP/NG & OB3210ALP/NG
Pan Head Screw
3/16"x3/8"
Qty. 9 (For OB2610ALP & OB3210ALP Models)
Qty. 7 (For OB2610ANG & OB3210ANG Models)
Part # S182G03061
*One Battery/AA and Four Battery/AAA included in the Hardware Pack.
4
Hardware Parts List for Models OB3210BLP/NG
PART #
PART DESCRIPTION
QTY
PURPOSE OF PART
P06006080A
Hardware Pack
1
For use in assembly of Model OB3210BLP/NG
S182G03061
Pan Head Screw 3/16" x 3/8"
4
Install Cabinet Bottom Panel
S182G03061
Pan Head Screw 3/16" x 3/8"
2
Install Cabinet Rear Panel
S185G03061
Bolt 3/16" x 3/8"
6
Install Partition Panel to Cabinet Panels
S182G03061
Pan Head Screw 3/16" x 3/8"
3
Install Tank Holder
S182G03061
Pan Head Screw 3/16" x 3/8"
8
Install Grill Bowl to Cabinet
S182G03061
Pan Head Screw 3/16" x 3/8"
2
Install Control Box
S182G03061
Pan Head Screw 3/16" x 3/8"
2
Install Transformer Bracket
S182G03061
Pan Head Screw 3/16" x 3/8"
3
Install NG Regulator Assembly Bracket
S182G03081
Pan Head Screw 3/16" x 1/2"
2
Install Side Shelf
S182G03061
Pan Head Screw 3/16" x 3/8"
4
Install Upper Door Bracket
S142G0306A
Countersunk Flat Head Screw 3/16" x 3/8"
4
Install Lower Door Bracket
P05515015L
Wrench
1
Adjust Cart Leg
Pan Head Screw
3/16"x3/8"
Qty. 28
Part # S182G03061
Wrench
Qty. 1
Part # P05515015L
Hardware Diagram for Models OB3210BLP/NG
Hardware Diagram for Models OB3210ANG
Countersunk Flat Head
Screw 3/16"x3/8"
Qty. 4
Part # S142G0306A
Bolt
3/16"x3/8"
Qty. 6
Part # S185G03061
Pan Head Screw
3/16"x1/2"
Qty. 2
Part # S182G03081
27AElectrode, FrontP02618058A1
27BElectrode, RearP02618059A1
28AThermocouple for Gas Valve, FrontP05305055B1
28BThermocouple for Gas Valve, RearP05305061B1
29AThermocouple for LED Light, FrontP05305066B1
29BThermocouple for LED Light, RearP05305065B1
28AElectrode, FrontP02618056AP02618056A2
28BElectrode, RearP02618057AP02618057A2
29AThermocouple for Gas ValveP05305054BP05305054B2
29BThermocouple for Gas ValveP05305055BP05305055B2
30AThermocouple for LED Light, Left FrontP05305056BP05305056B1
30BThermocouple for LED Light, Left RearP05305057BP05305057B1
30CThermocouple for LED LightP05305058BP05305058B1
30DThermocouple for LED LightP05305059BP05305059B1
To obtain the correct replacement parts for your gas grill, please refer to the part numbers in this parts list. The
following information is required to ensure you receive the correct parts:
1. Model and Serial Number (see CSA label on grill)
2. Part Number
3. Part Description
4. Quantity of parts needed
Important: Use only Grand Hall replacement parts. The use of any part that is not a Grand Hall replacement part can be
dangerous and will also void your product warranty. Keep this Operator's Manual for convenient referral and for part
replacement.
To obtain the correct replacement parts for your gas grill, please refer to the part numbers in this parts
list. The following information is required to ensure you receive the correct parts:
1. Model and Serial Number (see CSA label on grill)
2. Part Number
3. Part Description
4. Quantity of parts needed
Important: Use only Grand Hall replacement parts. The use of any part that is not a Grand Hall replacement part can be dangerous and will also void your product warranty. Keep this Operator's Manual for
convenient referral and for part replacement.
For the repair or replacement parts you need:
Call 1-877-934-7455 M-F 8:00AM-4:30PM CST
13
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.