Grand Hall Gt3211lng, Gt3211llp Owner's Manual

Liquid Propane Gas (LPG) Grill

Model GT3211LLP

Natural Gas (NG ) Grill

Model GT3211LNG

Operator's Manual

GT3211LLP

FREE HELP

FROM THE GRILL EXPERTS

Grand Hall is the expert on this product and

trained to help you with:

Assembly Questions

Grill Operation

Replacement of Damaged or Missing parts

visit www.grandhall.com or call: 1-877-934-7455

Monday - Friday 8:00am-4:30pm CST

IMPORTANT:

NOTE TO ASSEMBLER / INSTALLER:

Leave this manual with the consumer.

NOTE TO CONSUMER:

Keep this manual for future reference. RECORD YOUR SERIAL # __________________

(see silver CSA label on main body of grill)

GT3211LNG

! !

Failure to comply with these instructions could

result in a fire or explosion that could cause serious bodily injury, death or property damage. Whether this grill was assembled by you or

someone else, you must read this entire manual before using your grill to ensure the grill is properly assembled, installed and maintained.

Use your grill at least 3 feet away from any

wall or surface. Use your grill at least 3 feet away from combustible objects that can melt or

catch fire such as vinyl or wood siding, fences and overhangs or sources of ignition including pilot lights on water heaters and live electrical appliances. THIS GAS APPLIANCE IS DESIGNED FOR OUT-

DOOR USE ONLY. Never use your gas grill in a garage, porch,

shed, breezeway or any other enclosed area. Never obstruct the flow of ventilation air

around your gas grill housing. Never disconnect the gas regulator or any gas

fitting while your grill is lit. A lit grill can ignite leaking gas and cause a fire or explosion which could result in property damage, personal injury or death.

WARNING

Manual # P80134014A - Date:2011/01/20

Table of Contents

Primary Safety Warnings............................1-3

Pre-Assembly Instructions................................3

Part Diagrams and Lists............................4-9

Assembly Instructions.................................10-19

Use & Care Instructions:

• Gas Safety and Leak Tests................20-22

• Natural Gas Connection...............................23

• Lighting & Fuel Gauge Instructions......24-25

• Troubleshooting..............................................26

•

Transformer Instructions..............................27

Cleaning and Maintenance.......................28-29

Cooking Guide..........................................A1-A4

Frequently Asked Questions..................A5-A6

Warranty Terms.............................Back Cover

•

This appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the

National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.1.

•

Keep any electrical supply cord and the fuel supply hose away from any heated surfaces.

If you smell gas:

WARNING

DANGER

Shut off gas to the appliance. Extinguish any open flame. Open lid. If odor continues, keep away from the appliance and immediately call your gas supplier or your fire department.

! !

Do not store or use gasoline or other

WARNING

flammable liquids or vapors in the vicinity of this or any other appliances. An LP cylinder not connected for

use shall not be stored in the vicinity of this or any other appliance.

! !

LPG models must be used with Liquid Propane

•

Gas and the regulator assembly supplied. Natural Gas models must be used with Natural Gas only. Any attempt to convert the grill from one fuel type to another is extremely hazardous and will void the warranty.

Keep gas regulator hose away from hot grill surfaces

•

and dripping grease. Avoid unnecessary twisting of hose. Visually inspect hose prior to each use for cuts, cracks, excessive wear or other damage. If the hose appears damaged do not use the gas grill. Call 1877-934-7455 for a certified replacement hose.

California Proposition 65

•

Combustion byproducts produced when using this product contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

Brass components on the grill, such as hose fittings,

•

propane cylinder valves (sold separately) and burner valve stems, contain lead which is known to the State of California to cause cancer, birth defects, or other reproductive harm.

Never use charcoal or lighter fluid in this gas grill.

•

Failure to comply with these instructions could result in a grease fire or explosion that could cause serious bodily injury, death or property damage.

WARNING

CSA Label located on the right door panel

The Grease Tray must be visually inspected before each

•

grill use. Remove any grease and wash Grease Tray with a mild soap and warm water solution. Failure to

comply with these instructions could result in a grease fire or explosion that could cause serious bodily injury, death or property damage.

! !

Never cover or wrap the Cooking Grids, bottom of the Grill Bowl, or Grease Tray with aluminum foil or any other material that will absorb grease.

WARNING

Pre-Assembly Instructions For Your Safety

! !

Failure to comply with these instructions may result in a hazardous situation which, if not avoided, may result in injury.

Spiders and small insects can spin webs and nest in the grill Burner Tubes during transit and warehousing which can lead to a gas flow obstruction resulting in a fire in and around the Burner Tubes. This type of "FLASHBACK FIRE" can cause serious grill damage and create an unsafe operating condition for the user.

To reduce the chance of FLASHBACK FIRE you must clean the Burner Tubes as follows before initial use. Also do this at least once a

month in summer and fall or whenever spiders are active in your area, and if your grill has not been used for an extended period of time.

CAUTION

PRE-ASSEMBLY

Read and perform the following pre-assembly instructions:

Tools Required for Assembly:

protective work gloves

•

protective eyewear

•

Phillips Head Screwdriver

•

You will need assistance from another person to handle the grill head and other large, heavy parts.

Open lid of shipping carton. Remove top sheet of cardboard and packing materials. Lay cardboard sheet on floor and use as a work surface to protect floor and grill parts from scratches.

You may slice the carton front corners with a utility knife to lay open the carton front panel. This allows you to raise the Lid and remove the components packed inside, making it easier to lift.

Remove the screws from the rear of each Main Burner

1. using a Phillips Head Screwdriver or wrench.

Carefully lift each Burner up and away from the Gas

2. Valve Orifice.

Check and clean Burner/Venturi Tubes for insects

3. and insect nests. A clogged tube can lead to a fire beneath the grill.

Refer to the figure below and perform one of these

4. 3 cleaning methods:

METHOD 1: Bend a stiff wire or wire coat hanger into a small hook as shown and run the hook through the Burner Tube and inside the Burner several times to remove debris.

TO CLEAN BURNER TUBE, INSERT HOOK HERE

METHOD 2: Use a bottle brush with a flexible handle and run the brush through the Burner Tube and inside the Burner several times to remove any debris.

Burner Tube

Burner Port

Foot

Use the Hardware and Part Diagrams to ensure all items are included and free of damage.

Do not throw away the bags of hardware that are included with boxed parts. These are required for assembly.

Do not assemble or operate the grill if it appears damaged. If there are damaged or missing parts when you unpack the shipping box or you have questions during the assembly process call 1-877-934-7455 M-F 8AM4:30PM CST for assistance.

Grill Installation Codes

The installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane. Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2.

WARNING: Grease can get very hot. Always handle the Grease Tray with a flame retardant BBQ mitt. Before removing the Tray, always be sure that the grill has properly cooled. Be aware that the tray does contain grease and be extremely careful when removing the tray to prevent spillage. Failure to follow these instructions could cause serious bodily injury or property damage.

METHOD 3: Use an air hose to force air through each Burner Tube. The forced air should pass debris or obstructions through the Burner and out the Ports.

For safe operation ensure the Gas Valve Assembly Orifice is inside the Burner Tube before using your grill. See figure. If the Orifice is not inside the Burner Tube, lighting the Burner may cause explosion and/or fire resulting in serious bodily injury and/or property damage.

Orifice

Burner TubeGas Valve Assembly

To reduce the chance of FLASHBACK FIRE you must clean the Burner Tubes at least once a month in summer and fall or whenever spiders are active in your area, and if your grill has not been used for an extended period of time.

CAUTION

Hardware Parts List for Model GT3211LLP

PART # PART DESCRIPTION QTY PURPOSE OF PART

S112G0408A Phillips Head Screw 1/4" x 1/2" 4 Install Grill Bowl S112G0406A Phillips Head Screw 1/4" x 3/8" 3 S112G0406A Phillips Head Screw 1/4" x 3/8" 3 S112G0406A Phillips Head Screw 1/4" x 3/8" 4 Install Partition Panel S112G0306A Phillips Head Screw 3/16" x 3/8" 6 S342G0306A Flange Nut 3/16" 6 S112G0408A Phillips Head Screw 1/4" x 1/2" 4 Install Left Side Shelf S142G0306A Countersunk Flat Head Screw 3/16" x 3/8" 4 S271G0364A Bolt 3/16" x 9/16"(14.5mm) 4 S342G0306A Flange Nut 3/16" 8 S112G0306A Phillips Head Screw 3/16" x 3/8" 2 S342G0306A Flange Nut 3/16" 2 S142G0304A Countersunk Flat Head Screw 3/16" x 1/4" 2 Install Left Door Hinge Bracket S112G0406A Phillips Head Screw 1/4" x 3/8" 4 Install Bottom Shelf/Left Cabinet S112G0306A Phillips Head Screw 3/16" x 3/8" 6 S342G0306A Flange Nut 3/16" 6

Install Bowl Support Bracket, Left Install Bowl Support Bracket, Right

Install Rear Panel/Left Cabinet to Left and Right Panel /Left Cabinet

Install Storage Shelves/Left Cabinet

Install Left Cabinet Bracket/Front

Install Rear Panel/Right Cabinet to Left and Right Panel/Right Cabinet

S112G0408A Phillips Head Screw 1/4" x 1/2" 4 Install Side Burner Frame S142G0306A Countersunk Flat Head Screw 3/16" x 3/8" 2 S271G0364A Bolt 3/16" x 9/16"(14.5mm) 2 S342G0306A Flange Nut 3/16" 4 S112G0306A Phillips Head Screw 3/16" x 3/8" 2 S342G0306A Flange Nut 3/16" 2 S142G0304A Countersunk Flat Head Screw 3/16" x 1/4" 2 Install Right Door Hinge Bracket S112G0406A Phillips Head Screw 1/4" x 3/8" 4 Install Bottom Shelf/Left Cabinet S112G0306A Phillips Head Screw 3/16" x 3/8" 2 S342G0306A Flange Nut 3/16" 2 P05515021G Wrench 1 Adjust Level Adjuster on Island Assembly

AA Battery 3

Install Storage Shelf/Right Cabinet

Install Right Cabinet Bracket/Front

Install Battery Box Bracket

Hardware Parts List for Model GT3211LNG

PART # PART DESCRIPTION QTY PURPOSE OF PART

Install Bowl Support Bracket, Left Install Bowl Support Bracket, Right

Install Rear Panel/Left Cabinet to Left and Right Panel/Left Cabinet

Install Storage Shelves/Left Cabinet

Install Left Cabinet Bracket/Front

Install Rear Panel/Right Cabinet to Left and Right Panel/Right Cabinet

S112G0408A Phillips Head Screw 1/4" x 1/2" 4 Install Side Burner Frame S142G0306A Countersunk Flat Head Screw 3/16" x 3/8" 2 S271G0364A Bolt 3/16" x 9/16"(14.5mm) 2 S342G0306A Flange Nut 3/16" 4 S112G0306A Phillips Head Screw 3/16" x 3/8" 2 S342G0306A Flange Nut 3/16" 2 S142G0304A Countersunk Flat Head Screw 3/16" x 1/4" 2 Install Right Door Hinge Bracket S112G0406A Phillips Head Screw 1/4" x 3/8" 4 Install Bottom Shelf/Left Cabinet S112G0306A Phillips Head Screw 3/16" x 3/8" 2 S342G0306A Flange Nut 3/16" 2 S112G0304A Phillips Head Screw 3/16" x 1/4" 2 Install NG Regulator

P05515021GWrench 1 Adjust Level Adjuster on Island Assembly

AA Battery 3

Install Storage Shelf/Right Cabinet

Install Right Cabinet Bracket/Front

Install Battery Box Bracket

Hardware Diagram for Model GT3211LLP

Phillips Head Screw 1/4"x1/2" Qty. 12 Part # S112G0408A

Phillips Head Screw 1/4"x3/8" Qty. 18 Part # S112G0406A

Wrench Qty. 1 Part # P05515021G

Hardware Diagram for Models GT3211LNG

Flange Nut 3/16" Qty. 30 Part # S342G0306A

Countersunk Flat Head Screw 3/16"x3/8" Qty. 6 Part # S142G0306A

Countersunk Flat Head Screw 3/16"x1/4" Qty. 4 Part # S142G0304A

Phillips Head Screw 3/16"x3/8" Qty. 18 Part # S112G0306A

Bolt 3/16"x9/16" Qty. 6 Part # S271G0364A

Phillips Head Screw 1/4"x1/2" Qty. 12 Part # S112G0408A

Phillips Head Screw 1/4"x3/8" Qty. 18 Part # S112G0406A

Phillips Head Screw 3/16"x1/4" Qty. 2 Part # S112G0304A

Flange Nut 3/16" Qty. 30 Part # S342G0306A

Countersunk Flat Head Screw 3/16"x3/8" Qty. 6 Part # S142G0306A

Wrench Qty. 1 Part # P05515021G

Phillips Head Screw 3/16"x3/8" Qty. 18 Part # S112G0306A

Bolt 3/16"x9/16" Qty. 6 Part # S271G0364A

Countersunk Flat Head Screw 3/16"x1/4" Qty. 4 Part # S142G0304A

Parts Diagram for Models GT3211LLP & GT3211LNG

24b

25(LP only)

77(LP

Only)

24a

71(NG only)

64(LP only)

74(LP Only)

Parts List for Models GT3211LLP & GT3211LNG

KEY DESCRIPTION PART# QTY

1 Lid Assembly P0014742E4 1 2 Temperature Gauge P00601471A 1 3 Lid Handle P00213038M 1 4 Lid Handle Bracket, Left P00307061E 1 5 Lid Handle Bracket, Right P00308061E 1 6 Protective Pad P05518002 I 4 7 Bowl Panel, Left P007611564 1 8 Bowl Panel, Right P007621464 1

9 Bowl Grease Shield P06901030B 2 10 Bowl Bracket, Left P03305095D 1 11 Bowl Bracket, Right P03305096D 1 12 Cooking Grid P01615046H 4 13 Bowl wind shield, Rear/ Upper P0074805R4 1 14 Gas Collector Box with Electrode P02609055A 4 15 Electrode Wire Set P02615181A 1 16 Main Burner P02008083B 4 17 Bowl Panel, Front P0073897F4 1 18 Bowl Panel, Rear P0076010F4 1

19 20 Control Panel, Upper P02915622E 1 21 22 Control Knob/Main Burner P03426453R 4

23 Control Knob Seat with LED Light P03415313L 4

24a Switch for LED Light P05353005B 1 24b LED Light Wire Set P02616072A 1

25 Fuel Gauge Display (LPG) P05393001B 1 26 Electric Ignitor- 4 Port P02502244C 1 27 Grease Tray P02717837G 1 28 Grease Tray Frame P03327106D 1 29 Grease Tray Handle P00213039M 1 30 Gas Valve Heat Shield Bracket P03327107D 2 31 Bowl Wind Shield, Rear/Lower P069060914 1 32 Regulator with Hose Assembly（LPG) P03601003A 1 33 Regulator with Hose Assembly (NG) P03641002A 1 34 Side Burner Lid P0011555YJ 1 35 Side Burner Pot Support P008050104 1 36 Hot Plate/Side Burner P05701046F 1 37 Side Burner Bracket P03327024D 1 38 Side Burner P02002012A 1 39 Side Burner Electrode P02607060C 1 40 Side Burner Body P011030582 1 41 Storage Shelf, Right Cabinet 42 Control Knob/Side Burner P03401467E 1

45 46 Side Burner Orifice Bracket P03303150D 1

47 Side Burner Frame P01103059D 1

Gas Valve/Manifold Assembly (LPG) Y0060758 1 Gas Valve/Manifold Assembly (NG) Y0060759

Control Panel, Lower(LPG) P02915631U 1 Control Panel, Lower(NG) P02915641V 1

P01001102D

Gas Valve/Side Burner(LPG) P03250002I 1 Gas Valve/Side Burner(NG) P03250003I Quick Connect, Male-LP P03912001A 1 Quick Connect, Male-NG P03912002A 1

）

P03705100I 1 P03705101I 1

Quick Connect with Hose, Female（LPG Quick Connect with Hose, Female（NG

Parts List for Models GT3211LLP & GT3211LNG

KEY DESCRIPTION PART# QTY

48 Side Shelf, Left P01102067D 1 49 Left Panel, Left Cabinet P07605040B 1 50 Storage Shelf,Left Cabinet P01001097D 2 51 Rear Panel, Left Cabinet P07702126B 1 52 Level Adjuster P05322004A 8 53 Front Bracket, Left Cabinet P03301068D 1 54 Door Hinge Bracket P03313049D 4 55 Door Assembly, Left P043020624 1 56 Door Magnet P05351004B 2 57 Bottom Shelf, Left Cabinet P01001098D 1 58 Bowl Support Bracket, Left P03305093D 1 59 Right Panel, Left Cabinet P07605041B 1 60 Partition Panel P01004086D 1 61 Bowl Support Bracket, Right P03305094D 1 62 Left Panel, Right Cabinet P07606043B 1 63 Battery Set Bracket P03311056D 1 64 Fuel Gauge Set(LPG) Y0530017 1 65 Rear Panel, Right Cabinet P07606044B 1 66 Bottom Shelf, Right Cabinet P01001099D 1 67 Front Bracket, Right Cabinet P03301069D 1 68 Rear Panel, Right Cabinet P07606045B 1 69 Door Assembly, Right P043030624 1 70 Lighting Stick P05313029B 2 71 Hose, 12 FT. (NG) 3/8"ID P03703001A 1 72 Cooking Rack/Secondary P01525021J 1 73 Grease Tray Heat Shield P06903074B 1 74 Connector Wire for Fuel Gauge Set P02616075A 1 75 Battery Box P05301011V 1

76 Wind Shield/Main Burner P069060934 2 77 Fuel Gauge Display Bracket P03303153D 1

Hardware Pack-LP P06030033A 1 Hardware Pack-NG P06030034A 1 Operator's Manual P80134014A 1

For the repair or replacement parts you need:

Call 1-877-934-7455 M-F 8:00AM-4:30 PM CST

To obtain the correct replacement parts for your gas grill, please refer to the part numbers in this parts list. The following information is required to ensure you receive the correct parts:

1. Model and Serial Number (see CSA label on grill)

2. Part Number

3. Part Description

4. Quantity of parts needed

Important: Use only Grand Hall replacement parts. The use of any part that is not a Grand Hall replacement part can be dangerous and will also void your product warranty. Keep this Operator's Manual for convenient referral and for part replacement.

Assembly Instructions for GT3211LLP/NG

CAUTION : To assemble this grill, you should obtain assistance from another person when handling some of

the larger, heavier pieces.

Install Left Cabinet Right and Left Panel

Open carton and remove all packaging materials. Install the Right Panel onto the Rear Panel using 3 Phillips Head Screws 3/16"x 3/8" and tighten securely using 3 Flange Nuts 3/16". Install the Left Panel onto the Rear Panel using 3 Phillips Head Screws 3/16"x3/8" and tighten securely using 3 Flange Nuts 3/16".

Rear Panel, Left Cabinet

Phillips Head Screw 3/16"x3/8" Qty. 6 Part # S112G0306A

Flange Nut 3/16" Qty. 6 Part # S342G0306A

Install Left Cabinet Bottom Shelf

Position the Left Cabinet as shown. Install the Bottom Shelf between the Left Cabinet panels using 4 Phillips Head Screws 1/4"X3/8" and tighten securely as shown.

Right Panel, Left Cabinet

Front

Left Panel, Left Cabinet

Phillips Head Screw 1/4"x3/8" Qty. 4 Part # S112G0406A

Bottom Shelf, Left Cabinet

Left Cabinet

Install Level Adjusters and Door Hinge Bracket onto Left Cabinet

Countersunk Flat Head Screw 3/16"x1/4" Qty. 2 Part # S142G0304A

Install Level Adjusters onto the bottom of the Left Cabinet and tighten securely by hand. Install Door Hinge Bracket onto the Bottom Shelf using 2 Countersunk Flat Head Screws 3/16"x1/4" and tighten securely.

Bottom Shelf

Door Hinge Bracket

Install Storage Shelf onto Left Cabinet

Install 2 Bolts 3/16"x9/16" onto the Left and Right Panel and tighten securely using 2 Flange Nuts 3/16". Place the Storage Shelf with "U" shaped hole over the screws. See Fig.1 Align the holes on the Storage Shelf with the holes on the Left and Right Panel, insert 2 Countersunk Flat Head Screws 3/16"x3/8" and tighten securely using 2 Flange Nuts 3/16". Repeat the steps for another Storage Shelf.

Countersunk Flat Head Screw 3/16"x3/8" Qty. 4 Part # S142G0306A

Flange Nut 3/16" Qty. 8 Part # S342G0306A

Left Panel, Left Cabinet

Level Adjuster

Bolt 3/16"x9/16" Qty. 4 Part # S271G0364A

Fig.1

Lower Storage Shelf

Right Panel, Left Cabinet

+ 25 hidden pages

Grand Hall Gt3211lng, Gt3211llp Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual