Grand Hall Bte3211ang, Bte3211alp, Bte3811ang, Bte3811alp Owner's Manual

Operator's Manual

By Barbeques Galore.

R

Liquid Propane Gas (LPG) Grill

Models BTE3211ALP, BTE3811ALP

Natural Gas (NG ) Grill

Models BTE3211ANG, BTE3811ANG

BTE3211ALP/NG BTE3811ALP/NG

Grill Information Center:

FREE HELP

FROM THE GRILL EXPERTS

Grand Hall is the expert on this product
and trained to help you with:

Assembly Questions

Ÿ

Grill Operation

Ÿ

Replacement of Damaged or Missing parts

Ÿ

visit www.grandhall.com or call:
1-877-934-7455

Monday - Friday 8:00am-4:30pm CST

IMPORTANT:

NOTE TO ASSEMBLER / INSTALLER:

Ÿ

Leave this manual with the consumer.

NOTE TO CONSUMER:

Ÿ

Keep this manual for future reference.

RECORD YOUR SERIAL #

Ÿ

__________________
(see silver CSA label on main body of grill)

! !

Failure to comply with these instructions could

Ÿ

result in a fire or explosion that could cause
serious bodily injury, death or property damage.
Whether this grill was assembled by you or

Ÿ

someone else, you must read this entire manual
before using your grill to ensure the grill is
properly assembled, installed and maintained.

Use your grill at least 3 feet away from any

Ÿ

wall or surface. Use your grill at least 3 feet
away from combustible objects that can melt or

catch fire such as vinyl or wood siding, fences
and overhangs or sources of ignition including
pilot lights on water heaters and live electrical
appliances.
THIS GAS APPLIANCE IS DESIGNED FOR OUT-

Ÿ

DOOR USE ONLY.
Never use this gas appliance on a balcony, deck,

Ÿ

or patio above the ground floor of your home.
Never use your gas grill in a garage, porch,

Ÿ

shed, breezeway or any other enclosed area.
Never obstruct the flow of ventilation air

Ÿ

around your gas grill housing.
Never disconnect the gas regulator or any gas
fitting while your grill is lit. A lit grill can ignite
leaking gas and cause a fire or explosion which
could result in property damage, personal injury
or death.

WARNING

Manual # P80151126A - Date:2011/ 01/14

Table of Contents

Primary Safety Warnings............................1-3

Pre-Assembly Instructions...............................3

Part Diagrams and Lists............................4-12

Grill Assembly Instructions.......................13-16

Use & Care Instructions:

• Gas Safety and Leak Tests................17-19

• Natural Gas Connection...............................20

• Lighting Instructions......................................21

• Troubleshooting..............................................22

•

Rotisserie Instructions...........................23-25

Cleaning and Maintenance.......................26-27

Cooking Guide..........................................A1-A4

Frequently Asked Questions..................A5-A6

Repair Protection Agreements......Back Cover

!

•

This appliance, when installed, must be electri­cally grounded in accordance with local codes
or, in the absence of local codes, with the

National Electrical Code, ANSI/NFPA 70, or the
Canadian Electrical Code, CSA C22.1.

•

Keep any electrical supply cord and the fuel
supply hose away from any heated surfaces.

!

If you smell gas:

1.

2.

3.

4.

WARNING

DANGER

!

!

Shut off gas to the appliance.
Extinguish any open flame.
Open lid.
If odor continues, keep away from
the appliance and immediately call
your gas supplier or your fire
department.

CSA label located
on the Rear Bowl
Panel of the grill.

! !

1.

Do not store or use gasoline or other

WARNING

flammable liquids or vapors in the
vicinity of this or any other appli­ances.
An LP cylinder not connected for

2.

use shall not be stored in the vicinity
of this or any other appliance.

! !

LPG models must be used with Liquid Propane

•

Gas and the regulator assembly supplied. Natural
Gas models must be used with Natural Gas only.
Any attempt to convert the grill from one fuel type
to another is extremely hazardous and will void the
warranty.

Keep gas regulator hose away from hot grill

•

surfaces and dripping grease. Avoid unnecessary
twisting of hose. Visually inspect hose prior to
each use for cuts, cracks, excessive wear or other
damage. If the hose appears damaged do not use
the gas grill. Call 1-877-934-7455 for a certified
replacement hose.

California Proposition 65

•

Combustion byproducts produced when using this
product contain chemicals known to the State of
California to cause cancer, birth defects, or other
reproductive harm.

Brass components on the grill, such as hose fittings,

•

propane cylinder valves (sold separately) and burner
valve stems, contain lead which is known to the State
of California to cause cancer, birth defects, or other
reproductive harm.

Never use charcoal or lighter fluid in this gas grill.

•

Failure to comply with these instructions could result
in a grease fire or explosion that could cause serious
bodily injury, death or property damage.

The Grease Tray must be visually inspected before

•

each grill use. Remove any grease and wash Grease
Tray with a mild soap and warm water solution.

Failure to comply with these instructions could
result in a grease fire or explosion that could cause
serious bodily injury, death or property damage.

WARNING

! !

Never cover or wrap the Cooking Grids, bottom
of the Grill Bowl, or Grease Tray with aluminum
foil or any other material that will absorb grease.

2

WARNING

Pre-Assembly Instructions For Your Safety

! !

Failure to comply with these instructions may result
in a hazardous situation which, if not avoided, may
result in injury.

Spiders and small insects can spin webs and nest
in the grill Burner Tubes during transit and ware­housing which can lead to a gas flow obstruction
resulting in a fire in and around the Burner Tubes.
This type of "FLASHBACK FIRE" can cause serious
grill damage and create an unsafe operating con­dition for the user.

To reduce the chance of FLASHBACK FIRE
you must clean the Burner Tubes as follows
before initial use. Also do this at least once a

month in summer and fall or whenever spiders are
active in your area, and if your grill has not been
used for an extended period of time.

CAUTION

PRE-ASSEMBLY

Read and perform the following pre-assembly instruc­tions:

Tools Required for Assembly:

protective work gloves

•

protective eyewear

•

Phillips Head Screwdriver

•

You will need assistance from 2 people to handle the
grill head and other large, heavy parts.

Open lid of shipping carton. Remove top sheet of
cardboard and packing materials. Lay cardboard sheet
on floor and use as a work surface to protect floor and
grill parts from scratches.

You may slice the carton front corners with a utility knife
to lay open the carton front panel. This allows you to
raise the Lid and remove the components packed in­side, making it easier to lift.

Remove the screws from the rear of each Main Burner

1.
using a Phillips Head Screwdriver or a Wrench.

Carefully lift each Burner up and away from the Gas

2.
Valve Orifice.

Check and clean Burner/Venturi Tubes for insects

3.
and insect nests. A clogged tube can lead to a fire
beneath the grill.

Refer to the figure below and perform one of these

4.
3 cleaning methods:

METHOD 1: Bend a stiff wire or wire coat hanger
into a small hook as shown and run the hook
through the Burner Tube and inside the Burner
several times to remove debris.

TO CLEAN BURNER TUBE,
INSERT HOOK
HERE

9

METHOD 2: Use a bottle brush with a flexible
handle and run the brush through the Burner
Tube and inside the Burner several times to
remove any debris.

METHOD 3: Use an air hose to force air through
each Burner Tube. The forced air should pass
debris or obstructions through the Burner and out
the Ports.

For safe operation ensure the Gas Valve Assem­bly Orifice is inside the Burner Tube before using
your grill. (See figure) If the Orifice is not inside
the Burner Tube, lighting the Burner may cause
explosion and/or fire resulting in serious bodily
injury and/or property damage.

Burner Port

Burner Tube

Foot

Use the Hardware and Part Diagrams to ensure all items
are included and free of damage.

Do not throw away the bags of hardware that are in­cluded with boxed parts. These are required for assem­bly.

Do not assemble or operate the grill if it appears dam­aged. If there are damaged or missing parts when you
unpack the shipping box or you have questions during
the assembly process call 1-877-934-7455 M-F 8AM­4:30PM CST for assistance.

Grill Installation Codes

The installation must conform with local codes or, in the
absence of local codes, with either the National Fuel Gas
Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane.
Installation Code, CSA B149.1, or Propane Storage and
Handling Code, B149.2.

WARNING: Grease can get very hot. Always handle the Grease
Tray with a flame retardant BBQ mitt. Before removing the
Tray, always be sure that the grill has properly cooled. Be
aware that the Tray does contain grease and be extremely
careful when removing the Tray to prevent spillage. Failure
to follow these instructions could cause serious bodily injury
or property damage.

!

When using electrical appliances, basic safety
precautions should always be used.

CAUTION

WARNING

!

Gas Valve Assembly

Orifice

Burner Tube

3

Hardware Parts List for Models BTE3211ALP

Already installed on the Tank Holder

PART # PART DESCRIPTION QTY PURPOSE OF PART

P06030016A Hardware Pack 1 For use in assembly BTE3211ALP
S112G0306A Phillips Head Screw 3/16"x3/8" 2
S313G0306A Flange Nut 3/16" 2
S112G0306B Phillips Head Screw 3/16"x3/8" 4
S313G0306B Flange Nut 3/16" 4

Install the LP Regulator Bracket

Install the Tank Holder Brackets

S233G04084 Wing Bolt 1/4"x1/2" 1 Install Tank Holder Assembly

Hardware Diagram for Models BTE3211ALP

Phillips Head Screw
3/16"x3/8"
Qty. 2
Part # S112G0306A

For Installing the Tank Holder Assembly
(Already installed in Tank Holder Assembly)

Wing Bolt 1/4"x1/2"
Qty. 1
Part # S233G04084

*One Battery/AA included in the Hardware Pack

Phillips Head Screw
3/16"x3/8"
Qty. 4
Part # S112G0306B

Flange Nut 3/16"
Qty. 2
Part # S313G0306A

Flange Nut 3/16"
Qty. 4
Part # S313G0306B

Hardware Pack for Model BTE3211ANG

PART # PART DESCRIPTION QTY PURPOSE OF PART

P06030017A Hardware Pack 1 For use in assembly for Models BTE3211ANG

S112G03041
S112G03081
S313G03051

Phillips Head Screw 3/16"x1/4" 2
Phillips Head Screw 3/16"x1/2" 3
Flange Nut 3/16" 3

Install the NG Regulator
Install NG Regulator Bracket

Phillips Head Screw
3/16"x1/4"
Qty. 2
Part # S112G03041

*One Battery/AA included in the Hardware Pack

Hardware Diagram for Models BTE3211ANG

Phillips Head Screw
3/16"x1/2"
Qty. 3
Part # S112G03081

4

Flange Nut 3/16"
Qty. 3
Part # S313G03051

Hardware Parts List for Models BTE3811ALP

Already installed on the Tank Holder

PART # PART DESCRIPTION QTY PURPOSE OF PART

P06030018A Hardware Pack 1 For use in assembly for BTE3811ALP
S112G0306A Phillips Head Screw 3/16"x3/8" 2
S313G0306A Flange Nut 3/16" 2
S112G0306B Phillips Head Screw 3/16"x3/8" 4
S313G0306B Flange Nut 3/16" 4

Install the LP Regulator Bracket

Install the Tank Holder Brackets

S233G04084 Wing Bolt 1/4"x1/2" 1 Install Tank Holder Assembly

Hardware Diagram for Models BTE3811ALP

Phillips Head Screw
3/16"x3/8"
Qty. 2
Part # S112G0306A

For Installing the Tank Holder Assembly
(Already installed in Tank Holder Assembly)

Wing Bolt 1/4"x1/2"
Qty. 1
Part # S233G04084

*One Battery/AA included in the Hardware Pack

Phillips Head Screw
3/16"x3/8"
Qty. 4
Part # S112G0306B

Flange Nut 3/16"
Qty. 2
Part # S313G0306A

Flange Nut 3/16"
Qty. 4
Part # S313G0306B

Hardware Parts List for Model BTE3811ANG

PART # PART DESCRIPTION QTY PURPOSE OF PART

P06030019A Hardware Pack 1 For use in assembly for BTE3811ANG
S112G03041
S112G03081
S313G03051

Phillips Head Screw 3/16"x1/4" 2
Phillips Head Screw 3/16"x1/2" 3
Flange Nut 3/16" 3

Install the NG Regulator
Install NG Regulator Bracket

Phillips Head Screw
3/16"x1/4"
Qty. 2
Part # S112G03041

*One Battery/AA included in the Hardware Pack

Hardware Diagram for Model BTE3811ANG

Phillips Head Screw
3/16"x1/2"
Qty. 3
Part # S112G03081

5

Flange Nut 3/16"
Qty. 3
Part # S313G03051

Parts Diagram for Models BTE3211ALP/NG

1

4
6

7

8

9

10

11

12

13

14

32A

L1

44

45

21
22

23

17

20

15

18

46

47

48

49

27

28
30

29

31

40

L5

24

25

26

2

3

5

L6

34

43

B1
B2

B3
B4

19

16

32B

33

35

36

37

38

L239

L4

L3
B5

B6

42

41

6

Parts List for Model BTE3211ALP/NG

KEY

1 Lid Assembly P0015410EA 1
2 Temperature Gauge P00601071A 1
3 Protective Pad P05518002I 4
4 Lid Handle Bracket, Left P03303124A 1
5 Lid Handle Bracket, Right P03303125A 1
6 Lid Handle Heat Insulating Spacer P06802007A 2
7 Lid Handle P00218009A 1
8 Cooking Rack/Secondary P01515030K 1

9 Cooking Grid P016150436 3
10 Flame Tamer/Ceramic Support P01720040A 4
11 Flame Tamer/Ceramic P01801005A 52
12 Flame Tamer/Ceramic Support Bracket P03333006A 4
13 Burner Bracket Assembly P02209224A 1
14 Burner/Main P02003003B 4
15 Bowl Side Panel, Left P0072099PC 1
16 Bowl Side Panel, Right P0072199PC 1
17 Bowl Side Panel, Front P0073885DC 1
18 Bowl Side Panel, Rear P0075806DC 1
19 Grease Tray Heat Shield P06904052C 1
20 Gas Collector Box with Electrode P02609015B 4
21 Electric Wire Set P02616070A 1
22 Electric Wire, 5-contact P02627015A 1

23

24 LED Light Wire Set P02615179A 1
25 Control Panel, Upper P02908481S 1
26 Control Panel P02908506S 1
27 Control Knob with LED Light P03415313L 5
28 Control Knob P03411533L 4
29 Control Knob for Back Burner P03411543L 1
30 Electric Ignitor, 5 ports P02502298C 1
31 Electric Ignitor Protector P03328048Q 1

32A Bowl Trim Bracket, Left P07901041D 1

32B Bowl Trim Bracket, Right P07901042D 1

33 Grease Draining Plate P06902017S 2
34 Bowl Trim Bracket, Rear P07901040D 1
35 Bowl Trim Bracket, Front P07901043D 2
36 Lighting Tube P05507141E 1
37 Extension Fitting for Manifold P03902029A 1
38 Gas Valve/Manifold Extension P05005482G 1
39 Extension Tube P03720003A 1
40 Bowl Bracket, Left P01301014A 1
41 Bowl Bracket, Right P01302014A 1
42 Grease Tray Assembly Y0270029 1

Gas Valve/Manifold Assembly(LPG) Y0060753 1
Gas Valve/Manifold Assembly(NG) Y0060754 1

DESTRIPTION PART#

QTY.

7

Parts List for Models BTE3211ALP/NG

KEY

43 Bowl Wind Shield, Rear P06906087C 1
44 Regulator with Hose(LPG) P03601045A 1
45 Tank Holder Assembly(LPG) P05358003T 1
46 Bracket for NG Regulator(NG) P033040544 1
47 NG Regulator (NG) P03614009B 1
48 Regulator Hose (NG) P03705092F 1
49 Hose, 12 ft (NG) P03703001A 1
B1 Back Burner Assembly P02007074A 1
B2 Back Burner Electrode P02614025A 1
B3 Back Burner Thermocouple P05305069B 1
B4 Back Burner Thermocouple Bracket P03328047C 1
B5 Back Burner Orifice P06534009A 1
B6 Back Burner Extension Tube P03717062B 1
L1 GFCI Outlet/Transformer Assembly P05374017B 1
L2 Light Wire Set P05352008B 1
L3 Light, 12V, 10W P05383002B 2
L4 Light Cover, Rear P05383003B 2
L5 Light Switch P05360002B 1
L6 Light Set Holding Frame P06906089C 1

Hardware Pack P06030016A 1
Hardware Pack P06030017A 1
Operator's Manual P80151126A 1

DESTRIPTION PART#

QTY.

8

Parts Diagram for Models BTE3811ALP/NG

1

4

6

7

8

9

11

13

14

15

16

17

L1

50

29

12

42A

18

21

20

23
27
28

26

51

33

52

53

54

34

36

35

37

L5

30
31

32

38

2
3

5

10

B1

B2

24

25

L6

41

49

L4

L3

B5

B6

B3

22

19

44

47

48

B4

42B

43

45

46

L2

55

40

39

9

Parts List for Model BTE3811ALP/NG

KEY

1 Lid Assembly P0014518EA 1
2 Temperature Gauge P00601071A 1
3 Protective Pad P05518002I 4
4 Lid Handle Bracket, Left P03303124A 1
5 Lid Handle Bracket, Right P03303125A 1
6 Lid Handle Heat Insulating Spacer P06802007A 2
7 Lid Handle P00218010A 1
8 Cooking Rack/Secondary P01515031K 1

9 Cooking Grid P016150436 2
10 Cooking Grid P016050036 1
11 Flame Tamer/Ceramic Support P01720040A 3
12 Burner Heat Shield P069060454 1
13 Flame Tamer/Ceramic P01801005A 39
14 Flame Tamer/Ceramic Support Bracket P03333006A 4
15 Burner Bracket Assembly P02205154A 1
16 Burner/Main P02003003B 3
17 Burner/Infrared P02005010A 1
18 Bowl Side Panel, Left P0072099PC 1
19 Bowl Side Panel, Right P0072199PC 1
20 Bowl Side Panel, Front P0075813DC 1
21 Bowl Side Panel, Rear P0073896DC 1
22 Grease Tray Heat Shield P069040534 1
23 Gas collector box with Electrode P02609015B 3
24 Infrared Burner Electrode P02618060A 1
25 Infrared Burner Thermocouple P05305051A 1
26 Infrared Burner Thermocouple Bracket P03328047C 1
27 Electric Wire Set P02616071A 1
28 Electric Wire, 5-contact P02627016A 1

29

30 LED Light Wire P02615180A 1
31 Control Panel, Upper P02914336S 1
32 Control Panel P02914346S 1
33 Control Knob with LED Light P03415313L 5
34 Control Knob/Main Burner P03411533L 3
35 Control Knob P03411543L 2
36 Electric Ignitor, 5 ports P02502298C 1
37 Electric Ignitor Protector P03328048Q 1
38 Bowl Bracket, Left P01301014A 1
39 Bowl Bracket, Right P01302014A 1
40 Grease Tray Assembly Y0270028 1
41 Bowl Trim Bracket, Rear P07901045A 1

42A Bowl Trim Bracket, Left P07901041D 1

42B Bowl Trim Bracket, Right P07901042D 1

43 Grease Draining Plate P06902017S 2

Manifold and Gas Valve - LPG Y0060756 1
Manifold and Gas Valve - NG Y0060756 1

DESTRIPTION PART#

QTY.

10

Parts List for Models BTE3811ALP/NG

KEY

DESTRIPTION PART#

44 Bowl Trim Bracket, Front P07901043A 2
45 Lighting Tube P05507141E 1
46 Extension Fitting for Manifold P03902029A 1
47 Gas Valve/Manifold Extension P05005482G 1
48 Extension Tube P03720003A 1
49 Bowl Wind Shield, Rear P06906088C 1
50 Regulator with Hose(LPG) P03601045A 1
51 Tank Holder Assembly(LPG) P05358003T 1
52 Bracket for NG Regulator(NG) P033040544 1
53 NG Regulator (NG) P03614009B 1
54 Regulator Hose (NG) P03705092F 1
55 Hose, 12 ft (NG) P03703001A 1
B1 Back Burner Assembly P02007075A 1
B2 Back Burner Electrode P02614025A 1
B3 Back Burner Thermocouple P05305070A 1
B4 Back Burner Thermocouple Bracket P03328047C 1
B5 Back Burner Orifice P06534009A 1
B6 Back Burner Extension Tube P03717063B 1
L1 GFCI Outlet/Transformer Assembly P05374017B 1
L2 Light Wire Set P05352016B 1
L3 Light Cover P05383003B 2
L4 Light, 12V, 11W P05383002B 2
L5 Light Switch P05360002B 1
L6 Light Set Holding Frame P06906090C 1

Hardware Pack (LPG) P06030016A 1
Hardware Pack (NG) P06030017A 1
Operator's Manual P80151126A 1

QTY.

For the repair or replacement parts you need:

Call 1-877-934-7455 M-F 8AM-4:30 PM CST

To obtain the correct replacement parts for your gas grill, please refer to the part numbers in this parts list. The
following information is required to ensure you receive the correct parts:

1. Model and Serial Number (see CSA label on grill)

2. Part Number

3. Part Description

4. Quantity of parts needed
Important: Use only Grand Hall replacement parts. The use of any part that is not a Grand Hall replacement part can be
dangerous and will also void your product warranty. Keep this Operator's Manual for convenient referral and for part
replacement.

11