Grand Hall Bte3816blp, Bte3216ang, Bte3216blp, Bte3216alp, Bte3216bng Owner's Manual

Liquid Propane Gas (LPG) Grill

Models BTE2616(A,B)LP, BTE3216(A,B)LP & BTE3816BLP

Natural Gas (NG ) Grill

Models BTE2616(A,B)NG, BTE3216(A,B)NG & BTE3816BNG

Operator's Manual

BTE2616BLP/NG

(BTE2616B+UN2616ACT)

Grill Information Center:

FREE HELP

FROM THE GRILL EXPERTS

Barbeques Galore is the expert on this
product and trained to help you with:

Assembly Questions

Ÿ

Grill Operation

Ÿ

Replacement of Damaged or Missing parts

Ÿ

visit www.grandhall.com or call:
1-800-474-5587

Monday - Friday 8:00am-4:30pm PST

IMPORTANT:

NOTE TO ASSEMBLER / INSTALLER:

Ÿ

Leave this manual with the consumer.

NOTE TO CONSUMER:

Ÿ

Keep this manual for future reference.

RECORD YOUR SERIAL #

Ÿ

__________________
(see silver CSA label on main body of grill)

BTE3216BLP/NG

! !

Failure to comply with these instructions could

Ÿ

result in a fire or explosion that could cause
serious bodily injury, death or property damage.
Whether this grill was assembled by you or

Ÿ

someone else, you must read this entire manual
before using your grill to ensure the grill is
properly assembled, installed and maintained.

Use your grill at least 3 feet away from any

Ÿ

wall or surface. Use your grill at least 3 feet
away from combustible objects that can melt or

catch fire such as vinyl or wood siding, fences
and overhangs or sources of ignition including
pilot lights on water heaters and live electrical
appliances.
THIS GAS APPLIANCE IS DESIGNED FOR

Ÿ

OUTDOOR USE ONLY.
Never use your gas grill in a garage, porch,

Ÿ

shed, breezeway or any other enclosed area.
Never obstruct the flow of ventilation air

Ÿ

around your gas grill housing.
Never disconnect the gas regulator or any gas

Ÿ

fitting while your grill is lit. A lit grill can ignite
leaking gas and cause a fire or explosion which
could result in property damage, personal injury
or death.

BTE3816BLP/NG

BTE3216ALP/NGBTE2616ALP/NG

(BTE3216B+UN3216ACT)

WARNING

Manual # P80151147B - Date:2017/07/28

Table of Contents

Primary Safety Warnings............................1-3

Pre-Assembly Instructions...............................3

Part Diagrams and Lists............................5-13

Assembly Instructions.................................15-18

Use & Care Instructions:

• Gas Safety and Leak Tests..............19-21

• Natural Gas Connection............................22

• Lighting Instructions and Light Operation.23

• Troubleshooting...........................................24

• Rotisserie Instruction..............................25-27

Cleaning and Maintenance........................28-29

Cooking Guide............................................A1-A4

Frequently Asked Questions...................A5-A6

Warranty...........................................Back Cover

!

•

This appliance, when installed, must be electri­cally grounded in accordance with local codes
or, in the absence of local codes, with the

National Electrical Code, ANSI/NFPA 70, or the
Canadian Electrical Code, CSA C22.1.

•

Keep any electrical supply cord and the fuel
supply hose away from any heated surfaces.

WARNING

!

! !

1.

Do not store or use gasoline or other

WARNING

flammable liquids or vapors in the
vicinity of this or any other
appliances.
An LP cylinder not connected for

2.

use shall not be stored in the vicinity
of this or any other appliance.

! !

LPG models must be used with Liquid Propane

•

Gas and the regulator assembly supplied. Natural
Gas models must be used with Natural Gas only.
Any attempt to convert the grill from one fuel type
to another is extremely hazardous and will void the
warranty.

Keep gas regulator hose away from hot grill sur-

•

faces and dripping grease. Avoid unnecessary twist­ing of hose. Visually inspect hose prior to each use
for cuts, cracks, excessive wear or other damage.
If the hose appears damaged do not use the gas
grill. Call 1-800-474-5587 for a certified replace­ment hose.

WARNING

!

DANGER

If you smell gas:

Shut off gas to the appliance.

1.
Extinguish any open flame.

2.
Open lid.

3.
If odor continues, keep away from

4.
the appliance and immediately call

your gas supplier or your fire
department.

CSA label located on
the bowl rear panel.

California Proposition 65

•

!

Combustion byproducts produced when using this
product contain chemicals known to the State of Cali­fornia to cause cancer, birth defects, or other reproduc­tive harm.

Brass components on the grill, such as hose fittings,
propane cylinder valves (sold separately) and burner
valve stems, contain lead which is known to the State
of California to cause cancer, birth defects, or other
reproductive harm.

Never use charcoal or lighter fluid in this gas grill.

•

Failure to comply with these instructions could result
in a grease fire or explosion that could cause serious
bodily injury, death or property damage.

Before each use of your grill: Inspect the Grease Tray,

•

Grease Tray Heat Shield and inside of the Grill Bowl to
be sure there is no excessive grease and debris
buildup. Clean the Grease Tray, Grease Tray Heat
Shield and inside of the Grill Bowl frequently to elimi­nate grease/debris build-up and to prevent grease
fires. Failure to comply with these instructions could

result in a grease fire and even a subsequent explo­sion that could cause serious bodily injury, death or
property damage.

! !

Never cover or wrap the Cooking Grids, bottom of
the Grill Bowl, Grease Tray with aluminum foil or
any other material that will absorb grease.

2

WARNING

Pre-Assembly Instructions For Your Safety

! !

Failure to comply with these instructions may result
in a hazardous situation which, if not avoided, may
result in injury.

Spiders and small insects can spin webs and nest
in the grill Burner Tubes during transit and ware­housing which can lead to a gas flow obstruction
resulting in a fire in and around the Burner Tubes.
This type of "FLASHBACK FIRE" can cause serious
grill damage and create an unsafe operating con­dition for the user.

To reduce the chance of FLASHBACK FIRE
you must clean the Burner Tubes as follows
before initial use. Also do this at least once a

month in summer and fall or whenever spiders are
active in your area, and if your grill has not been
used for an extended period of time.

CAUTION

PRE-ASSEMBLY

Read and perform the following pre-assembly instruc­tions:

Tools Required for Assembly:

protective work gloves

•

protective eyewear

•

Phillips head screwdriver

•

You will need assistance from another person to handle
the grill head and other large, heavy parts.

Open lid of shipping carton. Remove top sheet of
cardboard and packing materials. Lay cardboard sheet
on floor and use as a work surface to protect floor and
grill parts from scratches.

You may slice the carton front corners with a utility knife
to lay open the carton front panel. This allows you to
raise the Lid and remove the components packed inside,
making it easier to lift.

Remove the screws from the rear of each Main Burner

1.

using a Phillips head screwdriver or wrench.
Carefully lift each Burner up and away from the Gas

2.
Valve Orifice.

Check and clean Burner/Venturi Tubes for insects

3.
and insect nests. A clogged tube can lead to a fire
beneath the grill.

Refer to the figure below and perform one of these

4.
3 cleaning methods:

METHOD 1: Bend a stiff wire or wire coat hanger
into a small hook as shown and run the hook
through the Burner Tube and inside the Burner
several times to remove debris.

TO CLEAN BURNER TUBE,
INSERT HOOK
HERE

9

METHOD 2: Use a bottle brush with a flexible
handle and run the brush through the Burner
Tube and inside the Burner several times to
remove any debris.

METHOD 3: Use an air hose to force air through
each Burner Tube. The forced air should pass
debris or obstructions through the Burner and out
the Ports.

Burner Port

Burner Tube

Foot

Use the Hardware and Part Diagrams to ensure all items
are included and free of damage.

Do not throw away the bags of hardware that are in­cluded with boxed parts. These are required for assem­bly.

Do not assemble or operate the grill if it appears
damaged. If there are damaged or missing parts when
you unpack the shipping box or you have questions dur­ing the assembly process call 1-800-474-5587 M-F 8AM­4:30PM PST for assistance.

Grill Installation Codes

The installation must conform with local codes or, in the
absence of local codes, with either the National Fuel Gas
Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane
Installation Code, CSA B149.1, or Propane Storage and
Handling Code, B149.2.

WARNING: Grease can get very hot. Always handle the Grease
Tray with a flame retardant BBQ mitt. Before removing the
Tray, always be sure that the grill has properly cooled. Be
aware that the Tray does contain grease and be extremely
careful when removing the Tray to prevent spillage. Failure to
follow these instructions could cause serious bodily injury or
property damage.

!

When using electrical appliances, basic safety
precautions should always be used.

CAUTION

WARNING

!

3

Hardware Parts List for Models BTE2616BLP/NG & BTE3216BLP/NG & BTE3816BLP/NG

PART # PART DESCRIPTION QTY PURPOSE OF PART

P06013018CHardware Pack 1 For use in assembly of Models BTE2616B, BTE3216B, BTE3816B
S182G03061Pan Head Screw 3/16" x 3/8" 2 Install the Transformer Bracket (BTE2616B, BTE3216B, BTE3816B)
S182G03061Pan Head Screw 3/16" x 3/8" 2 Install the Bracket with LP Regulator (LPG Model Only)
S182G03061Pan Head Screw 3/16" x 3/8" 3 Install the Tank Tray Set onto the Bottom Panel (LPG Model Only)

S313G0306BAA Battery 1

Hardware Diagram for Models BTE2616BLP/NG & BTE3216BLP/NG & BTE3816BLP/NG

Pan Head Screw 3/16"x3/8"
Part # S182G03061
Qty. 7 (For Models BTE2616BLP,BTE3216BLP, BTE3816BLP)
Qty. 2 (For Models BTE2616BNG, BTE3216BNG & BTE3816BNG)

*One AA Battery included in the Hardware Pack

4

Parts Diagram for Models BTE2616BLP & BTE2616BNG

1

2a

2b

3

5

13

10

6

7

8
24

4

6

22

23

10

11

12

9

19

20

21

47

18

46

45

17

44

43

42

41

14

16

15

40

37

39

54

14

38

30

37

31

53

35

52

29

28

27

56

26

25

9

32

33

34

36

57

58

51

50

49

48

55

5

Parts List for Models BTE2616BLP & BTE2616BNG

KEY DESCRIPTION PART#

1 Lid Assembly P0014644AA

2a Temperature Gauge P00601551A
2b Temperature Gauge Seat P00614031A

3 Lid Handle Bracket, Left P00307052E
4 Lid Handle Bracket, Right P00308052E
5 Lid Handle P00215041H
6 Protective Pad P05518002I
7 Lid Assembly Bracket, Left P03320007C
8 Lid Assembly Bracket, Right P03320008C

9 Lid Hinge with Nut P05501136L
10 Lid Trim Plate Bracket P03318007A
11 Lid Assembly Reinforcing Bracket, Left P033180084
12 Lid Assembly Reinforcing Bracket, Right P033180094
13 Lid Trim Plate P0011464A4
14 Warming Rack Bracket P01529002J
15 Warming Rack P01514023B
16 Cooking Grid P016060404
17 Flame Tamer with Ceramic P01720041A
18 Burner/Main P02001070B

19

Back Burner Cover (LPG) P06906107C

Back Burner Cover (NG) P06906108C
20 Trim Panel, Rear P07515030A
21

Bowl Side Panel, Rear/Upper

P0075822BC
22 Back Burner Thermocouple Protector P03328050C 1
23 Thermocouple for Back Burner P05305072B 1
24 Back Burner Electrode P02614071C 1

25

Back Burner Assembly (LPG) Y0030028

Back Burner Assembly (NG) Y0030029
26 Back Burner Extension Tube P03701011A 1
27 Bowl Side Panel, Rear/Lower P0073756FC 1
28 Burner Bracket P02208047A 1
29 Bowl Rear Panel Assembly P0077201B4 1
30 Bowl Front Panel P0076315BC 1
31 Bowl Side Panel, Left P007613564 1
32 Bowl Side Panel, Right P007623464 1
33 Bowl Side Trim Plate, Left / Upper P0077301R4 1
34 Bowl Side Trim Plate, Right / Upper P0077401R4 1
35 Bowl Side Trim Plate, Left / Lower P0077501R4 1
36 Bowl Side Trim Plate, Right / Lower P0077601R4 1
37 Grease Shield P069021414 2
38 Electric Wires Set P02615203A 1
39 Gas Collector Box with Electrode P02608061A 2

QTY.

1
1
1
1

1
1
4
1
1
2
2
1
1
1
2
1
2
3
3
1
1
1
1

1
1

6

Parts List for Models BTE2616BLP & BTE2616BNG

KEY

40

Gas Valve/Manifold Assembly (LPG) Y0060840

Gas Valve/Manifold Assembly (NG) Y0060841

DESCRIPTION PART#

41 Bowl Front Trim Plate Assembly P02917011S 1
42 Electric Wires Set P02627024A 1
43 LED Rectifier with Wire Assembly P05383020B 1
44 Control Panel P02917043S
45 Switch for Light P05360004B 1
46 Control Knob Seat with LED light P03445014A
47 Control Knob for Main Burner P03446024A 3
48 LED Light for Back Burner P05373011B
49 Control Knob for Back Burner P03418245U 1
50 Electric Ignitor - 4 Ports P02505014G 1
51 Grease Tray Heat Shield P06904064C
52 Grease Tray Handle P0272017CC
53 Grease Tray P02717923C
54 Grease Tray Slide Set P05516140M
55 Lighting Stick P05507140M
56 Transformer Bracket P03328057A
57 Transformer Wire Set P05352027B
58 Transformer P05374021B
59 Regulator Hose Connector (LPG) P03901056C
60 Regulator with Hose(LPG) P03635005A
61 Regulator with Connector (NG) P03614005C 1
62 Tank Tray Set (LPG) Y0340055

Rotisserie Assembly Y0250219 1

Hardware Pack P06013018C 1

Operator's Manual P80151147B 1

QTY.

1
1

1

3

1

1
1

1

1
1
1
1
1
1
1

1

7

Parts Diagram for Models BTE3216BLP & BTE3216BNG

1

2a

2b

3

5

19

20

21

20
21

22

26

16

14

6

7

10

10

13

15

11

12

9

34

4

6

23

8

24

25

27

18

17

54

50

49

48

47

62

30

31

36

37

38

39

59

60

61

14

32

33

40

43

44

45
46

52

53

41a

41b

42

40

55

56

57

51

58

29

28

9

35

65

63

64

8

Parts List for Models BTE3216BLP & BTE3216BNG

KEY

1 Lid Assembly P0014759AA 1
2a Temperature Gauge P00601551A 1
2b Temperature Gauge Seat P00614031A 1

3 Lid Handle Bracket, Left P00307052E 1

4 Lid Handle Bracket, Right P00308052E 1

5 Lid Handle P00215039H 1

6 Protective Pad P05518002I 4

7 Lid Assembly Bracket, Left P03320007C 1

8 Lid Assembly Bracket, Right P03320008C 1

9 Lid Hinge with Nut P05501136L 2
10 Lid Trim Plate Bracket P03318007A 2
11 Lid Assembly Reinforcing Bracket, Left P003180084 1
12 Lid Assembly Reinforcing Bracket, Right P033180094 1
13 Lid Trim Plate P0011465A4 1
14 Warming Rack Bracket P01529002J 2
15 Warming Rack P01515032B 1
16 Cooking Grid P01606041B 4
17 Flame Tamer with Ceramic P01720041A 4
18 Burner/Main P02001070B

19

20 Lamp Cover P05352013E 2
21 Lamp Assembly P05352028B 2
22 Back Burner Frame P02011078B 1
23 Back Burner Thermocouple Protector P03328050C 1
24 Thermocouple for Back Burner P05305072B 1
25 Back Burner Electrode P02614071C 1

26
27 Back Burner Extension Tube P03701011A 1

28 Trim Panel, Rear P07515027A 1
29 Bowl Side Panel, Rear/Lower P0073757BC 1
30 Burner Bracket P02204357A 1
31 Crosslight Channel P02212415A 1
32 Bowl Rear Panel assembly P0077701B4 1
33 Bowl Front Panel P0076316BC 1
34 Bowl Side Panel, Left P007613564 1
35 Bowl Side Panel, Right P007623464 1
36 Bowl Side Trim Plate, Left / Upper P0077301R4 1
37 Bowl Side Trim Plate, Right / Upper P0077401R4 1
38 Bowl Side Trim Plate, Left / Lower P0077501R4 1
39 Bowl Side Trim Plate, Right / Lower P0077601R4 1
40 Grease Shield P069021414 2

Back Burner Assembly (LPG) Y0030028 1

Back Burner Assembly (NG) Y0030029 1

DESCRIPTION PART#

Back Burner Cover(LPG) P06906107C 1

Back Burner Cover(NG) P06906108C 1

QTY.

4

9

Parts List for Models BTE3216BLP & BTE3216BNG

KEY

41a Gas Collector Box with Electrode P02608059C 1
41b Gas Collector Box with Electrode P02608060A 1

42 Electric Wires Set/Electrode P02615204A 1

43

44 Bowl Front Trim Plate Assembly P02915781S 1
45 Electric Wires Set P02627025A 1
46 LED Rectifier with Wire Assembly P05383021B 1
47 Control Panel P02915993S 1
48 Switch for Lamp P05360003B 1
49 Control Knob Seat with LED Light P03445014A 4
50 Control Knob for Main Burner P03446024A 4
51 LED Light for Back Burner P05373011B 1
52 Control Knob for Back Burner P03418245U 1
53 Electric Ignitor, 4-Port P02505014G 1
54 Grease Tray Heat Shield P06904065C 1
55 Grease Tray Handle P0272018CC 1
56 Grease Tray P02717933C 1
57 Grease Tray Slide Set P05516140M 1
58 Lighting Stick P05507140M 1
59 Transformer Bracket P03328057A 1
60 Transformer Wire Set P05352029B 1
61 Transformer P05374021B 1
62 Regulator Hose Connector (LPG) P03901056C 1
63 Regulator with Hose(LPG) P03635005A 1
64 Regulator with Connector (NG) P03614005C 1
65 Tank Tray Set (LPG) Y0340055 1

Gas Valve/Manifold Assembly (LPG) Y0060842 1

Gas Valve/Manifold Assembly (NG) Y0060843 1

DESCRIPTION PART#

Rotisserie Assembly Y0250220 1

Hareware Pack P06013018C 1

Operator's Manual P80151147B 1

QTY.

10

Parts Diagram for Model BTE3816BLP & BTE3816BNG

1

2a

2b

3

5

19

7

10

10

11

13

14

6

12

9

33

4

8

25

26

27

20

21

21

23

20

24

22

16

32

14

15

17

18

46

47

48

49

43

44

45

52

53

39

40

42

50

51

41

35

39

37

54

55

56

57

61

38

60

62

30

31

58

59

28

9

29

34

36

64

63

11