Grand Hall Bte3212bng, Bte3212blp, Bte3212ang, Bte3212alp, Un3212act Owner's Manual
...
Liquid Propane Gas (LPG) Grill
Models BTE3212BLP, BTE3812BLP & BTE3212ALP
Natural Gas (NG ) Grill
Models BTE3212BNG, BTE3812BNG & BTE3212ANG
Operator's Manual
BTE3212BLP/NG BTE3812BLP/NG
Grill Information Center:
FREE HELP
FROM THE GRILL EXPERTS
Grand Hall is the expert on this product
and trained to help you with:
Assembly Questions
Ÿ
Grill Operation
Ÿ
Replacement of Damaged or Missing parts
Ÿ
visit www.grandhall.com or call:
1-877-934-7455
Monday - Friday 8:00am-4:30pm CST
IMPORTANT:
NOTE TO ASSEMBLER / INSTALLER:
Ÿ
Leave this manual with the consumer.
NOTE TO CONSUMER:
Ÿ
Keep this manual for future reference.
RECORD YOUR SERIAL #
Ÿ
__________________
(see silver CSA label on main body of grill)
BTE3212ALP/NG
(BTE3212B+UN3212ACT)
! !
Failure to comply with these instructions could
Ÿ
result in a fire or explosion that could cause
serious bodily injury, death or property damage.
Whether this grill was assembled by you or
Ÿ
someone else, you must read this entire manual
before using your grill to ensure the grill is
properly assembled, installed and maintained.
Use your grill at least 3 feet away from any
Ÿ
wall or surface. Use your grill at least 3 feet
away from combustible objects that can melt or
catch fire such as vinyl or wood siding, fences
and overhangs or sources of ignition including
pilot lights on water heaters and live electrical
appliances.
THIS GAS APPLIANCE IS DESIGNED FOR
Ÿ
OUTDOOR USE ONLY.
Never use your gas grill in a garage, porch,
Ÿ
shed, breezeway or any other enclosed area.
Never obstruct the flow of ventilation air
Ÿ
around your gas grill housing.
Never disconnect the gas regulator or any gas
Ÿ
fitting while your grill is lit. A lit grill can ignite
leaking gas and cause a fire or explosion which
could result in property damage, personal injury
or death.
WARNING
Manual # P80151133A - Date:2012/04/13
Table of Contents
Primary Safety Warnings............................1-3
Pre-Assembly Instructions...............................3
Part Diagrams and Lists............................4-13
Assembly Instructions.................................14-17
Use & Care Instructions:
• Gas Safety and Leak Tests..............18-20
• Natural Gas Connection............................21
• Lighting Instructions and Light Operation..22
• Troubleshooting...........................................23
• Rotisserie Instruction.............................24-26
Cleaning and Maintenance.......................27-28
Cooking Guide..........................................A1-A4
Frequently Asked Questions..................A5-A6
Warranty...........................................Back Cover
!
•
This appliance, when installed, must be electrically grounded in accordance with local codes
or, in the absence of local codes, with the
National Electrical Code, ANSI/NFPA 70, or the
Canadian Electrical Code, CSA C22.1.
•
Keep any electrical supply cord and the fuel
supply hose away from any heated surfaces.
WARNING
!
! !
1.
Do not store or use gasoline or other
WARNING
flammable liquids or vapors in the
vicinity of this or any other appliances.
An LP cylinder not connected for
2.
use shall not be stored in the vicinity
of this or any other appliance.
! !
LPG models must be used with Liquid Propane
•
Gas and the regulator assembly supplied. Natural
Gas models must be used with Natural Gas only.
Any attempt to convert the grill from one fuel type
to another is extremely hazardous and will void the
warranty.
Keep gas regulator hose away from hot grill sur-
•
faces and dripping grease. Avoid unnecessary twisting of hose. Visually inspect hose prior to each use
for cuts, cracks, excessive wear or other damage.
If the hose appears damaged do not use the gas
grill. Call 1-877-934-7455 for a certified replacement hose.
WARNING
!
DANGER
If you smell gas:
Shut off gas to the appliance.
1.
2.
Extinguish any open flame.
Open lid.
3.
If odor continues, keep away from
4.
the appliance and immediately call
your gas supplier or your fire
department.
CSA label located on
the bowl rear panel.
California Proposition 65
•
!
Combustion byproducts produced when using this
product contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Brass components on the grill, such as hose fittings,
propane cylinder valves (sold separately) and burner
valve stems, contain lead which is known to the State
of California to cause cancer, birth defects, or other
reproductive harm.
Never use charcoal or lighter fluid in this gas grill.
•
Failure to comply with these instructions could result
in a grease fire or explosion that could cause serious
bodily injury, death or property damage.
Before each use of your grill: Inspect the Grease Tray,
•
Grease Tray Heat Shield and inside of the Grill Bowl to
be sure there is no excessive grease and debris
buildup. Clean the Grease Tray, Grease Tray Heat
Shield and inside of the Grill Bowl frequently to eliminate grease/debris build-up and to prevent grease
fires. Failure to comply with these instructions could
result in a grease fire and even a subsequent explosion that could cause serious bodily injury, death or
property damage.
! !
Never cover or wrap the Cooking Grids, bottom
of the Grill Bowl, Grease Tray with aluminum foil
or any other material that will absorb grease.
2
WARNING
Pre-Assembly Instructions For Your Safety
! !
Failure to comply with these instructions may result
in a hazardous situation which, if not avoided, may
result in injury.
Spiders and small insects can spin webs and nest
in the grill Burner Tubes during transit and warehousing which can lead to a gas flow obstruction
resulting in a fire in and around the Burner Tubes.
This type of "FLASHBACK FIRE" can cause serious
grill damage and create an unsafe operating condition for the user.
To reduce the chance of FLASHBACK FIRE
you must clean the Burner Tubes as follows
before initial use. Also do this at least once a
month in summer and fall or whenever spiders are
active in your area, and if your grill has not been
used for an extended period of time.
CAUTION
PRE-ASSEMBLY
Read and perform the following pre-assembly instructions:
Tools Required for Assembly:
protective work gloves
•
protective eyewear
•
Phillips head screwdriver
•
You will need assistance from another person to handle
the grill head and other large, heavy parts.
Open lid of shipping carton. Remove top sheet of
cardboard and packing materials. Lay cardboard sheet
on floor and use as a work surface to protect floor and
grill parts from scratches.
You may slice the carton front corners with a utility knife
to lay open the carton front panel. This allows you to
raise the Lid and remove the components packed inside, making it easier to lift.
Remove the screws from the rear of each Main Burner
1.
using a Phillips head screwdriver or wrench.
Carefully lift each Burner up and away from the Gas
2.
Valve Orifice.
Check and clean Burner/Venturi Tubes for insects
3.
and insect nests. A clogged tube can lead to a fire
beneath the grill.
Refer to the figure below and perform one of these
4.
3 cleaning methods:
METHOD 1: Bend a stiff wire or wire coat hanger
into a small hook as shown and run the hook
through the Burner Tube and inside the Burner
several times to remove debris.
TO CLEAN BURNER TUBE,
INSERT HOOK
HERE
9
METHOD 2: Use a bottle brush with a flexible
handle and run the brush through the Burner
Tube and inside the Burner several times to
remove any debris.
METHOD 3: Use an air hose to force air through
each Burner Tube. The forced air should pass
debris or obstructions through the Burner and out
the Ports.
For safe operation ensure the Gas Valve Assembly Orifice is inside the Burner Tube before using
your grill. (See figure). If the Orifice is not inside
the Burner Tube, lighting the Burner may cause
explosion and/or fire resulting in serious bodily
injury and/or property damage.
Burner Port
Burner Tube
Foot
Use the Hardware and Part Diagrams to ensure all items
are included and free of damage.
Do not throw away the bags of hardware that are included with boxed parts. These are required for assembly.
Do not assemble or operate the grill if it appears damaged. If there are damaged or missing parts when you
unpack the shipping box or you have questions during
the assembly process call 1-877-934-7455 M-F 8AM4:30PM CST for assistance.
Grill Installation Codes
The installation must conform with local codes or, in the
absence of local codes, with either the National Fuel Gas
Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane
Installation Code, CSA B149.1, or Propane Storage and
Handling Code, B149.2.
WARNING: Grease can get very hot. Always handle the Grease
Tray with a flame retardant BBQ mitt. Before removing the
Tray, always be sure that the grill has properly cooled. Be
aware that the Tray does contain grease and be extremely
careful when removing the Tray to prevent spillage. Failure to
follow these instructions could cause serious bodily injury or
property damage.
!
When using electrical appliances, basic safety
precautions should always be used.
CAUTION
WARNING
!
Gas Valve Assembly
Orifice
Burner Tube
3
Hardware Parts List for Models BTE3212BLP/NG & BTE3812BLP/NG
For use in assembly of Model BTE3212BLP/NG,
BTE3812BLP/NG
Install the Bracket with LP Regulator
(For Model BTE3212BLP & BTE3812BLP Only)
Install the Tank Tray Set onto the Bottom Panel
(For Model BTE3212BLP & BTE3812BLP Only)
PART # PART DESCRIPTION QTY PURPOSE OF PART
P06013018A Hardware Pack 1
S182G03061 Pan Head Screw 3/16" x 3/8" 2 Install the Transformer Bracket
S182G03061 Pan Head Screw 3/16" x 3/8" 2
S182G03061 Pan Head Screw 3/16" x 3/8" 3
S313G0306B Battery/AA 1
Hardware Diagram for Models BTE3212BLP/NG & BTE3812BLP/NG
Pan Head Screw
3/16"x3/8"
Qty. 7 (For Models BTE3212BLP & BTE3812BLP )
Qty. 2 (For Models BTE3212BNG & BTE3812BNG)
Part # S182G03061
*One Battery/AA included in the Hardware Pack
4
Parts Diagram for Models BTE3212ALP/NG & BTE3212BLP/NG
7
1
2A
2B
3
5
6
8
6
41
13
31
30
28
27
12
26
24
25
11A
23
22
10
9
4
49
50
51
20
11B
14
15
17
18
19
21
34
35
36
48
44
43
46
40
39
52
42
44
43
45
47
16
53A
33
32
29
57
37
38
53B
55B
54
56
55C
55A
5
Parts List for Models BTE3212ALP/NG & BTE3212BLP/NG
KEY
1 Lid Assembly P0014734AA 1
2A Temperature Gauge P00601551A 1
2B Temperature Gauge Seat P00614031A 1
3 Lid Handle Bracket, Left P00307058N 1
4 Lid Handle Bracket, Right P00308058N 1
5 Lid Handle P00215039H 1
6 Protective Pad P05518002I 4
7 Lid Assembly Bracket, Left P03320007C 1
8 Lid Assembly Bracket, Right P03320008C 1
9 Lid Trim Plate P0014735QJ 1
10 Warming Rack P015160282 1
11A Cooking Grid W255 P016050056 2
11B Cooking Grid W290 P016050046 1
12
13 Burner/Main P02003049B 4
14 Lid Hinge with Nut P05501136L 2
15 Bowl Side Panel, Left P0076124EC 1
16 Bowl Side Panel, Right P0076224EC 1
17 Grill Bowl Assembly P00713996C 1
18 Burner Bracket P02204357A 1
19 Gas Collector Box with Electrode P02608059C 2
20 Crosslight Channel P02212405A 1
21 Electric Wires Set/Electrode P02615188A 1
22
23 Bowl Front Trim Plate Assembly P02915781S 1
24 Electric Wires Set P02627018A 1
25 LED Rectifier with Wire Assembly P05383011B 1
26 Terminal Collector P05336007E 1
27 Control Panel P02915793S 1
28 Switch for Lamp P05360003B 1
29 LED Light for Back Burner P05373010B 1
30 Control Knob Seat with LED Light P03439014A 4
31 Control Knob for Main Burner P03435025U 4
32 Control Knob for Back Burner P03418245U 1
33 Electric Ignitor, 4-Port P02502384C 1
34 Grease Tray Heat Shield P06904059C 1
35 Grease Tray Bracket Y0270026 1
36 Grease Tray Handle P0272011CC 1
37 Grease Tray P02717793C 1
38 Grease Tray Slide Set P05516140M 2
39 Bowl Panel, Rear/Lower P0073740BC 1
40 Trim Panel, Rear P07515027A 1
41 Lamp Wire Set P05352022B 1
Flame Tamer with Ceramic P01720041A
Gas Valve/Manifold Assembly (LPG) Y0060793 1
Gas Valve/Manifold Assembly (NG) Y0060794 1
DESTRIPTION PART#
QTY.
4
6
Parts List for Models BTE3212ALP/NG & BTE3212BLP/NG
KEY
42 Lamp Wire Set Protector P05533011A 2
43 Lamp,12V, 10W P05352012B 2
44 Lamp Cover P05352013E 2
45 Back Burner Frame P02011075B 1
46
47 Back Burner Extension Tube P03701011A 1
48 Back Burner Cover P06906099C 1
49 Back Burner Thermocouple Protector P03328050C 1
50 Thermocouple for Back Burner P05305072B 1
51 Back Burner Electrode P02614015C 1
52 Hose, 12 FT (NG), 3/8" ID P03703001A 1
53A Regulator with Hose(LPG) P03635005A 1
53B Regulator Hose Connector (LPG) P03901056C 1
54 Regulator Assembly (NG) P03614005C 1
55A Transformer P05374015B 1
55B Transformer Bracket(For Build-in Model Only) P03328057A 1
55C Transformer Connecting Wire P05352023B 1
56 Lighting Stick P05507140M 1
57 Tank Tray Set (LPG) (For Build-in Model Only) Y0340050 1
Back Burner Assembly (LPG) Y0030028 1
Back Burner Assembly (NG) Y0030029 1
Rotisserie Assembly Y0250206 1
Hardware Pack P06013018A 1
Operator's Manual P80151133A 1
DESTRIPTION PART#
QTY.
7
Parts Diagram for Model BTE3812BLP/NG
7
1
2A
2B
9
3
6
5
8
6
47
43
42
40
41
10
11A
12
13
23
24
26
27
28
29
25
11B
21
22
31
4
14
15
17
18
19
20
34
35
36
37
49
50
48
45
33
51
54B
43
42
46
44
39
38
16
52A
52B
30
32
56
55
54C
53
54A
8
Parts List for Model BTE3812BLP/NG
KEY
1 Lid Assembly P0011979AA 1
2A Temperature Gauge P00601551A 1
2B Temperature Gauge Seat P00614031A 1
3 Lid Handle Bracket, Left P00307058N 1
4 Lid Handle Bracket, Right P00308058N 1
5 Lid Handle P00215040H 1
6 Protective Pad P05518002I 4
7 Lid Assembly Bracket, Left P03320007C 1
8 Lid Assembly Bracket, Right P03320008C 1
9 Lid Trim Plate P0011980QJ 1
10 Warming Rack P015170072 1
11A Cooking Grid W255 P016050056 3
11B Cooking Grid W217 P016050066 1
12
13 Burner P02003049B 5
14 Lid Hinge with Nut P05501136L 2
15 Bowl Side Panel, Left P0076124EC 1
16 Bowl Side Panel, Right P0076224EC 1
17 Grill Bowl Assembly P00769016C 1
18 Burner Bracket P02210057A 1
19 Gas Collector Box with Electrode P02608059C 4
20 Electric Wires Set/Electrode P02615189A 1
21
22 Bowl Front Trim Plate Assembly P02916061S 1
23 Electric Wires Set P02627019A 1
24 LED Rectifier with Wire Assembly P05383012B 1
25 Terminal Collector P05336007E 1
26 Control Panel P02916073S 1
27 Switch for Lamp P05360003B 1
28 Control Knob Seat P03439014A 5
29 Control Knob for Main Burner P03435025U 5
30 Control Knob for Back Burner P03418245U 1
31 LED Light for Back Burner P05373010B 1
32 Electric Ignitor, 6-Port P02502305C 1
33 Grease Tray Heat Shield P06904060C 1
34 Grease Tray Bracket Y0270030 1
35 Grease Tray Handle P0272013CC 1
36 Grease Tray P02717793C 1
37 Grease Tray Slide Set P05516140M 2
38 Bowl Panel, Rear/Lower P0073752BC 1
39 Trim Panel, Rear P07515028R 1
40 Lamp Wire Set P05352022B 1
41 Lamp Wire Set Protector P05533011A 2
42 Lamp,12V, 10W P05352012B 2
Flame Tamer/Ceramic Support P01720041A
Gas Valve/Manifold Assembly (LPG) Y0060795 1
Gas Valve/Manifold Assembly (NG) Y0060796 1
DESTRIPTION PART#
QTY.
5
9
Parts List for Model BTE3812BLP/NG
KEY
DESTRIPTION PART#
QTY.
43 Lamp Cover P05352013E 2
44 Back Burner Frame P02011076B 1
45
Back Burner Assembly (LPG) Y0030028 1
Back Burner Assembly (NG) Y0030029 1
46 Back Burner Extension Tube P03701011A 1
47 Back Burner Cover P06906099C 1
48 Thermocouple Protector P03328050C 1
49 Thermocouple for Back Burner P05305072B 1
50 Back Burner Electrode P02614015C 1
51 Hose, 12 FT (NG), 3/8" ID P03703001A 1
52A Regulator with Hose(LPG) P03635005A 1
52B Regulator Hose Connector (LPG) P03901056C 1
53 Regulator with Hose (NG) P03614005C 1
54A Transformer P05374015B 1
54B Transformer Bracket P03328057A 1
54C Transformer Connecting Wire P05352023B 1
55 Lighting Stick P05507140M 1
56 Tank Tray Set (LPG) Y0340050 1
Rotisserie Assembly Y0250207 1
Hardware Pack P06013018A 1
Operator's Manual P80151133A 1
For the repair or replacement parts you need:
Call 1-877-934-7455 M-F 8AM-4:30 PM CST
To obtain the correct replacement parts for your gas grill, please refer to the part numbers in this parts list. The
following information is required to ensure you receive the correct parts:
1. Model and Serial Number (see CSA label on grill)
2. Part Number
3. Part Description
4. Quantity of parts needed
Important: Use only Grand Hall replacement parts. The use of any part that is not a Grand Hall replacement part can be
dangerous and will also void your product warranty. Keep this Operator's Manual for convenient referral and for part
replacement.
10
Parts Diagram for Model UN3212ACT(OPTIONAL)
28
2
6
8
4
29
30
14
16
12
19
21
10
23
17
18
20
22
15
11
24
16
25
1
26
27
7
9
13
3
5
11
Loading...