The Latest in High-Performance, High-Pressure Technology
Xtreme Sprayers with NXT® Technology
Discover the Next Generation of Xtreme Power and Performance
NXT Air Motor Technology lasts up to 10 times longer!
We’ve taken the best and made it even better. With the Xtreme NXT, you get a new airless sprayer that sets a higher standard for long-lasting durability. In
fact, the NXT Air Motor is proven to last 10 times longer than its predecessor, the Graco
control applications, the Xtreme NXT also provides easy access to the modular air valve, a de-icing feature and reduced noise. And with more models and
configurations to choose from, you get the precise pressure and output you need for your high performance coatings spraying applications.
NXT Air Motor
• Modular design for
easier maintenance
• Rugged body armor
won’t rust or dent
• Highest technology air
motor on the market
King.™ Built to handle the toughest protective coatings and corrosion
DataTrak™ Control
• Runaway protection
• Pump diagnostics
• Material usage
• Optional accessory
Quick Disconnect
• Makes for easier service
Modular Air Valve
• De-ice control reduces icing
• Up to 50% quieter than
previous models
• Modular air valve
- Reduces stalling
- Easy-to-repair
Graco Xtreme Pump Lower
with Built-In Filter
• Lower cost of ownership
• Longer-lasting rod
with Chromex
• Quick knockdown
™
coating
2
The Rules Have Changed
TIME (milliseconds)
CURRENT
STANDARD
MOTORS
XTREME WITH
NXT TECHNOLOGY
0200400600
LOUDER
105
100
95
90
85
80
KING
COMPETITOR
NXT 6500
De-Ice
NXT 6500
Low-Noise
* All pressures 100 psi
103 dB(A)
100 dB(A)
96 dB(A)
87 dB(A)
Raising the Bar for High-Performance Airless Spraying
Reliability. Durability. More Choices.
Xtreme Sprayers… choose the package that fits your
demanding spraying applications.
Zinc Xtreme Package
with Circulation and
Heavy-Duty Cart
Xtreme Sprayer with
Lightweight Cart
Xtreme Sprayer with
Hopper Feed Kit
and Heavy-Duty Cart
Less pulsation for better results
Xtreme NXT technology provides a smooth, rapid
changeover for a better, more consistent finish
and less user fatigue.
A
B
C
D
Less than
A
Quick changeover and recovery
B
with less pulsation
Pressure spike at changeover
C
Longer changeover causing pulsation
D
1
⁄15 of a second changeover!
Noise-reduction technology
The quiet, low-noise NXT air motor operates around
87 decibels, while other comparable motors operate
up to 103 dB(A).
Mount Type:
H : Heavy-duty cart L: Lightweight cart W: Wall-mount
Example:
X46DH2 is a 46:1,
De-Ice, heavy-duty,
bare package with DataTrak
Notes: Packages sold with XSeal_LTH packings only. Packages sold with built-in filter only. Complete packages sold with
XTR™ gun, 50 ft x 3/8 hose and 6 ft x 1/4 whip hose. Wall-mount packages are only available bare, but include 10 ft suction
hose with 55 gal suction tube.
* Only available on X45, X60 or X70 De-ice, heavy-duty or lightweight cart packages.
Package/DataTrak
1: Complete package with DataTrak 5: Complete hopper package with DataTrak
2: Bare package with DataTrak 6: Complete hopper package, no DataTrak
3: Complete package, no DataTrak 7: Complete package, no DataTrak,
4: Bare package, no DataTrak no built-in fluid filter*
™
:
PUMPS
Output per cycle
Motor Size
Maximum Working Pressure
psi (bar, MPa)
Maximum Air Input Pressure
psi (bar, MPa)
Maximum Free Flow Output
SPECIFICATIONS
XTREME SPRAYER
gpm (lpm)
Output at 60 CPM gpm (lpm)
MOUNT
MOTOR
TYPE
TYPE
D
H
D
H
D
L
D
L
L
COMPLETE
BAREWITH HOPPER
SPRAYERS
WALL-MOUNT
H
L
H
L
L
L
L
D
H
D
H
D
L
D
L
L
H
L
H
L
L
L
L
D
H
D
H
D
L
D
L
L
H
L
H
L
L
L
L
D
W
D
W
L
W
L
W
DATATRAK
INCLUDED
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
PACKAGE
C
C
C
C
C
C
C
C
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
B
B
B
B
* Includes seals for both old and new series filter caps.
®
or Bulldog® motors
287979 23:1 Dura-Flo Sprayer Bare with De-Icing NXT Air Motor
287981 32:1 Dura-Flo Sprayer Package (Silver Spray Gun and Hoses)
XN3DH2 NXT 3400 De-Icing with DataTrak on a Bare Heavy Duty-Cart *
XN3DH4 NXT 3400 De-Icing on a Bare Heavy-Duty Cart *
XN3DL2 NXT 3400 De-Icing with DataTrak on a Bare Lightweight Cart *
XN3DL4 NXT 3400 De-Icing on a Bare Lightweight Cart *
XN6DH2 NXT 6500 De-Icing with DataTrak on a Bare Heavy-Duty Cart *
XN6DH4 NXT 6500 De-Icing on a Bare Heavy-Duty Cart *
XN6DL2 NXT 6500 De-Icing with DataTrak on a Bare Lightweight Cart *
XN6DL4 NXT 6500 De-Icing on a Bare Lightweight Cart *
247312 Cart adapter for NXT2200 Air Motor
287919 Lightweight base cart
287884 Heavy-duty base cart
186075 Poly filter support
179801 Carbon steel filter support
New X-Tuff™ Repair Kits
262789 X-Tuff Repair Kit, 85 cc lowers
262790 X-Tuff Repair Kit, 115 cc lowers
262791 X-Tuff Repair Kit, 145 cc lowers
262792 X-Tuff Repair Kit, 180 cc lowers
262793 X-Tuff Repair Kit, 220 cc lowers
262794 X-Tuff Repair Kit, 250 cc lowers
262795 X-Tuff Repair Kit, 290 cc lowers
Filter/Packings:
1: No built-in filter with Xtreme Seal (3) Leather (2)
2: Built-in filter with Xtreme Seal (3) Leather (2)
3: No built-in filter with TuffStack (5)
4: Built-in filter with TuffStack (5)
Filter Cap Conversion Kit
24F975 (85-290cc lowers)
see manual 406882
Xtreme Seal™ (UHMWPE/LTH). Good for abrasive
materials. Standard in new Xtreme Sprayers.
Tuff-Stack™ (PTFE). Ideal for chemical resistance
and higher temperatures. Not ideal for abrasive
applications.
™
X-Tuff
(UHMWPE/PTFE). Good for chemical
resistance and durability in applicationons below
140°F (60°C).
Airless Guns
XTR-5 Airless Spray Gun
Maximum working pressure: 5000 psi (345 bar, 34.5 MPa)
XTR500
XTR501
XTR502
XTR503
XTR504
XTR505
6
XTR-7 Airless Spray Gun
One inch round handle, four-finger trigger, no tip
One inch round handle, four-finger trigger, 519 flat tip
Oval-insulated handle, four-finger trigger, 519 XHD RAC tip
Oval-insulated handle, two-finger trigger, 519 XHD RAC tip
One inch round handle, four-finger trigger, 519 XHD RAC tip
One inch round handle, two-finger trigger, 519 XHD RAC tip
Maximum working pressure: 7250 psi (500 bar, 50.0 MPa)
XTR700
XTR701
XTR702
XTR703
XTR704
XTR705
Round handle, four-finger trigger, no tip
Round handle, four-finger trigger, 519 flat tip
Oval-insulated handle, four-finger trigger, 519 XHD RAC tip
Oval-insulated handle, two-finger trigger, 519 XHD RAC tip
Round handle, four-finger trigger, 519 XHD RAC tip
Round handle, two-finger trigger, 519 XHD RAC tip
XHF Airless Spray Gun
Maximum working pressure: 7250 psi (500 bar, 50.0 MPa)
262854
248834
XHF Gun, includes XHD 429 tip (see brochure 348891)
XHF Gun Swivel
10: 10 ft (3.0 m) 1X: 100 ft (30.5 m)
3/8 in, 50 ft hose
H xxxxx
Gun Accessories
Accessories
287450 Two-finger Trigger Kit
287449 Four-finger Round Trigger Kit
287451 Four-finger Oval Insulation Trigger Kit
246294 10 in (254 mm) Gun Extension, 7250 psi (500 bar, 50 MPa)
246295 15 in (380 mm) Gun Extension, 7250 psi (500 bar, 50 MPa)
246296 18 in (457 mm) Gun Extension, 7250 psi (500 bar, 50 MPa)
262826 Gun splitter, 7250 psi (500 bar, 50 MPa)
246297 180º spray nozzle, 7/8-14 UNC-2B, 7250 psi (500 bar, 50 MPa)
248837 Gun Repair Kit, Includes Gasket, Needle and Seat
287032 Filter, 60 Mesh
287033 Filter, 100 Mesh
287034 Filter, 60 and 100 Mesh Combination
Xtreme-Duty High-Pressure Hoses
Product Identifier:H = Hose
Pressure Rating:
4: 4500 psi 7: 7250 psi
5: 5600 psi
Hose Diameter:
25: 1/4 in (6.4 mm) 50: 1/2 in (12.7 mm)
38: 3/8 in (9.5 mm)
Example:
H53850 is a 5600 psi,
Length:
03: 3 ft (0.9 m) 25: 25 ft (7.6 m)
06: 6 ft (1.8 m) 50: 50 ft (15.2 m)
XHD™ RAC® SwitchTip
4500 psi
5600 psi
7250 psi
Choose the Right Hose for the Job
Working pressure .............. 4500 psi (310 bar),5600 psi (386 bar), or 7250 psi (500 bar)
Temperature rating (all sizes) ...................................................-40˚ to 180˚F (-40˚ to 82˚C)
Chemical resistance ... Hose cover resistant to a wide variety of solvents, acids and bases
Weather resistance .................................. Hose cover has outstanding resistance to oxygen,
H67550 3/4 in x 50 ft (15.2 m), 6500 psi, (448 bar, 44.8 MPa)
H77550 3/4 in x 50 ft (15.2 m), 7250 psi, (500 bar, 50.0 MPa)
ozone, sunlight and general weather conditions
Graco XHD Guard XHD Tips
XHD001 For pressures up to 7250 psi (500 bar, 50.0 MPa) XHD_ _ _ Use numbers in table above to complete the part number
XHD005 For pressures up to 7250 psi (500 bar, 50.0 MPa); XHD003 XHD RAC housing, SST – wrench-tight for extended life
for guns with 11/16 in thread
Xtreme NXT Spray Accessories
Part # Description
288347 Hopper Feed Kit
255143 Wall-Mount Bracket
245132 Xtreme Floor-Stand Kit
NXT206 DataTrak Upgrade Kit for the NXT 2200
NXT306 DataTrak Upgrade Kit for the NXT 3400
NXT606 DataTrak Upgrade Kit for the NXT 6500
NXT107 NXT Air Motor Valve – fits all three sizes
262230 External Air Controls for Lightweight Xtreme Package Carts
262231 External Air Controls for Heavy-Duty Xtreme Package Carts
NXT112 De-Ice Control Knob (5-Pack)
NXT102 De-Ice Control Repair Kit
Part # Description
NXT100 Replacement Poppet Valve Kit
181072 Round Suction Tube Strainer
191635 Tube Strainer
245176 Suction Kit, Replaces OEM Suction Assembly (6 ft, 1.8 m hose)
288687 Suction Kit, Wall Mount Version (10 ft, 3 m hose)
245136 55 gal (200 l) suction tube extension,
245190 Inlet Ball Spring Load Kit: 145cc, 180cc
245191 Inlet Ball Spring Load Kit: 220cc, 250cc, 290cc
245127 Carbide piston ball for 145 or 180 cc lower, 3-pack
244841 Lubricator – NXT Air Motor
206995 TSL, 1 qt (0.9 L)
7
ABOUT GRACO
Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products
move, measure, control, dispense and apply a wide range of fluids and viscous materials used
in vehicle lubrication, commercial and industrial settings.
The company’s success is based on its unwavering commitment to technical excellence, world-class
manufacturing and unparalleled customer service. Working closely with qualified distributors, Graco
offers systems, products and technology that set the quality standard in a wide range of fluid handling
solutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication,
and dispensing sealants and adhesives, along with power application equipment for the contractor
industry. Graco’s ongoing investment in fluid management and control will continue to provide
innovative solutions to a diverse global market.
Graco Australia Pty Ltd.
Suite 17, 2 Enterprise Drive
Bundoora, Victoria 3083
Australia
Tel: 61 3 9468 8500
Fax: 61 3 9468 8599
CHINA
Graco Hong Kong Ltd.
Shanghai Representative Office
Room 118 1st Floor
No.2 Xin Yuan Building
No.509 Cao Bao Road
Shanghai, 200233
The People’s Republic of China
Tel: 86 21 649 50088
Fax: 86 21 649 50077
INDIA
Graco Hong Kong Ltd.
India Liaison Office
Room 432, Augusta Point
Regus Business Centre 53
Golf Course Road
Gurgaon, Haryana
India 122001
Tel: 91 124 435 4208
Fax: 91 124 435 4001
JAPAN
Graco K.K.
1-27-12 Hayabuchi
Tsuzuki-ku
Yokohama City, Japan 2240025
Tel: 81 45 593 7300
Fax: 81 45 593 7301
KOREA
Graco Korea Inc.
Shinhan Bank Building
4th Floor #1599
Gwanyang-Dong, Dongan-Ku,
Anyang-si, Korea 431-060
Tel: 82 31 476 9400
Fax: 82 31 476 9801
SALES/
DISTRIBUTION/
SERVICE
North America
Customer Service
800-328-0211
Fax 877-340-6427
Call today for product information or to request a demonstration.
877-84GRACO (1-877-844-7226) or visit us at www.graco.com.