Graco XTR Airless Spray Guns User Manual
™
XTR
Airless Spray Guns
Rugged Design to Handle the Toughest Protective Coatings
Built for Extreme Conditions
• Compact design allows for easy maneuverability
• XTR-5: maximum fluid pressure of 5000 (345 bar, 34.5 MPa)
• XTR-7: maximum fluid pressure of 7250 (500 bar, 50 MPa)
• Variety of handle and trigger options
• High quality materials and construction
P R O V E N Q U A L I T Y . L E A D I N G T E C H N O L O G Y .
Lightweight and Ergonomic
Genuine Graco Fluid Hoses
Make the Difference
Xtreme-Duty™ 4500 psi (310 bar) High Pressure Hose
Hose Female
Part # Length Diameter NPSM
H42503 3 ft (0.9 m) 1/4 in (6.4 mm) 1/4 in
H42506 6 ft (1.8 m) 1/4 in (6.4 mm) 1/4 in
H42510 10 ft (3.0 m) 1/4 in (6.4 mm) 1/4 in
H42525 25 ft (7.6 m) 1/4 in (6.4 mm) 1/4 in
H42550 50 ft (15.2 m) 1/4 in (6.4 mm) 1/4 in
H4251X 100 ft (30.5 m) 1/4 in (6.4 mm) 1/4 in
H43803 3 ft (0.9 m) 3/8 in (9.5 mm) 3/8 in
H43806 6 ft (1.8 m) 3/8 in (9.5 mm) 3/8 in
H43810 10 ft (3.0 m) 3/8 in (9.5 mm) 3/8 in
H43825 25 ft (7.6 m) 3/8 in (9.5 mm) 3/8 in
H43850 50 ft (15.2 m) 3/8 in (9.5 mm) 3/8 in
H4381X 100 ft (30.5 m) 3/8 in (9.5 mm) 3/8 in
H45010 10 ft (3.0 m) 1/2 in (12.7 mm) 1/2 in
H45025 25 ft (7.6 m) 1/2 in (12.7 mm) 1/2 in
H45050 50 ft (15.2 m) 1/2 in (12.7 mm) 1/2 in
H4501X 100 ft (30.5 m) 1/2 in (12.7 mm) 1/2 in
Xtreme-Duty 5600 psi (386 bar) High Pressure Hose
Hose Female
Part # Length Diameter NPSM
H52503 3 ft (0.9 m) 1/4 in (6.4 mm) 1/4 in
H52506 6 ft (1.8 m) 1/4 in (6.4 mm) 1/4 in
H52510 10 ft (3.0 m) 1/4 in (6.4 mm) 1/4 in
H52525 25 ft (7.6 m) 1/4 in (6.4 mm) 1/4 in
H52550 50 ft (15.2 m) 1/4 in (6.4 mm) 1/4 in
H5251X 100 ft (30.5 m) 1/4 in (6.4 mm) 1/4 in
H53803 3 ft (0.9 m) 3/8 in (9.5 mm) 3/8 in
H53806 6 ft (1.8 m) 3/8 in (9.5 mm) 3/8 in
H53810 10 ft (3.0 m) 3/8 in (9.5 mm) 3/8 in
H53825 25 ft (7.6 m) 3/8 in (9.5 mm) 3/8 in
H53850 50 ft (15.2 m) 3/8 in (9.5 mm) 3/8 in
H5381X 100 ft (30.5 m) 3/8 in (9.5 mm) 3/8 in
H55010 10 ft (3.0 m) 1/2 in (12.7 mm) 1/2 in
H55025 25 ft (7.6 m) 1/2 in (12.7 mm) 1/2 in
H55050 50 ft (15.2 m) 1/2 in (12.7 mm) 1/2 in
H5501X 100 ft (30.5 m) 1/2 in (12.7 mm) 1/2 in
Technical Specifications
Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . XTR-5: 5000 psi (345 bar, 34.5 MPa)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XTR-7: 7250 psi (500 bar, 50 MPa)
Fluid orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.090 in (2.3 mm)
Fluid inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 npsm
Maximum fluid temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160º F (71º C)
Sound pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84.3dB(A)*
Sound power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95.7dB(A)*
Dimensions . . . . . . . . . . XTR-5: Weight 14.5 oz (411 g), Length 4.35 in (111 mm), Height 7.1 in (180 mm)
. . . . . . . . . . . . . . . . . . . . . XTR-7: Weight 24 oz (688 g), Length 4.35 in (111 mm), Height 7.1 in (180 mm)
Wetted parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aluminum, stainless steel, polyethylene, polyurethane,
polypropylene, nylon, acetal, carbide, solvent-resistant O-rings
Instruction Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312145
* Results are maximum readings taken at 6000 psi (414 bar, 41 MPa), with GHD519 tip, using water. Sound power level was tested to ISO 9614-2.
Ordering Information
XTR-5 Airless Spray Gun
Maximum working pressure: 5000 psi (345 bar, 34.5 MPa)
XTR500 1” round handle, four-finger trigger, no tip
XTR501 1” round handle, four-finger trigger, flat tip*
XTR502 Oval insulated handle, four-finger trigger, XHD RAC tip*
XTR503 Oval insulated handle, two-finger trigger, XHD RAC tip*
XTR504 1” round handle, four-finger trigger, XHD RAC tip*
XTR505 1” round handle, two-finger trigger, XHD RAC tip*
Accessories
287450 2-finger trigger kit
287449 4-finger round trigger kit
287451 4-finger oval insulation trigger kit
246294 10 in (254 mm) gun extension,
7250 psi (500 bar, 50 MPa)
246295 15 in (380 mm) gun extension,
7250 psi (500 bar, 50 MPa)
246296 18 in (457 mm) gun extension,
7250 psi (500 bar, 50 MPa)
XTR-7 Airless Spray Gun
Maximum working pressure: 7250 psi (500 bar, 50.0 MPa)
XTR700 Round handle, four-finger trigger, no tip
XTR701 Round handle, four-finger trigger, flat tip*
XTR702 Oval insulated handle, four-finger trigger, XHD RAC tip*
XTR703 Oval insulated handle, two-finger trigger, XHD RAC tip*
XTR704 Round handle, four-finger trigger, XHD RAC tip*
XTR705 Round handle, two-finger trigger, XHD RAC tip*
Includes 519 tip
*
246297 180º spray nozzle, 7/8-14 UNC-2B,
7250 psi (500 bar, 50 MPa)
248837 Gun repair kit, includes gasket, needle and seat
XHD001 XHD RAC Guard
287032 Filter, 60 mesh, included in every gun
287033 Filter, 100 mesh
287034 Filter, 60 and 100 mesh combination
Quality Features for Ultimate Coatings Results
Xtreme-Duty 7250 psi (500 bar) High Pressure Hose
Hose Female
Part # Length Diameter NPSM
H72503 3 ft (0.9 m) 1/4 in (6.4 mm) 1/4 in
H72506 6 ft (1.8 m) 1/4 in (6.4 mm) 1/4 in
H72510 10 ft (3.0 m) 1/4 in (6.4 mm) 1/4 in
H72525 25 ft (7.6 m) 1/4 in (6.4 mm) 1/4 in
H72550 50 ft (15.2 m) 1/4 in (6.4 mm) 1/4 in
H7251X 100 ft (30.5 m) 1/4 in (6.4 mm) 1/4 in
H73803 3 ft (0.9 m) 3/8 in (9.5 mm) 3/8 in
H73806 6 ft (1.8 m) 3/8 in (9.5 mm) 3/8 in
H73810 10 ft (3.0 m) 3/8 in (9.5 mm) 3/8 in
H73825 25 ft (7.6 m) 3/8 in (9.5 mm) 3/8 in
H73850 50 ft (15.2 m) 3/8 in (9.5 mm) 3/8 in
H7381X 100 ft (30.5 m) 3/8 in (9.5 mm) 3/8 in
H75010 10 ft (3.0 m) 1/2 in (12.7 mm) 1/2 in
H75025 25 ft (7.6 m) 1/2 in (12.7 mm) 1/2 in
H75050 50 ft (15.2 m) 1/2 in (12.7 mm) 1/2 in
H7501X 100 ft (30.5 m) 1/2 in (12.7 mm) 1/2 in
©2006-2010 Graco Inc. Form No. 336053 Rev. E 9/10 Printed in the U.S.A.
All other brand names or marks are used for identification purposes
and are trademarks of their respective owners. All written and visual data contained
in this document are based on the latest product information available at the time of
publication. Graco reserves the right to make changes at any time without notice.
Needle Assembly and XHD™ RAC® SwitchTip
• Exceptional life, pattern and finish
• Great for high solids coatings
• Factory set needle needs no adjustments
™
Easy Out™ Gun Filter
• Reduces tip plugs
• Eliminates collapsed filters
• Provides more filtration area
Variety of Handle and Trigger Options
• 2-and 4-finger trigger options
• Oval-insulated or round handle
• Lightweight trigger pull
• Easily detaches for access to filter
• Acts as a wrench to remove
• Small profile sprays in tight areas
Trigger Guard
filter from gun handle
EasyGlide™ Swivel
• Allows easier gun movement
under high pressure
Call today for product information or to request a demonstration
1-877-844-7226 or visit us at www.graco.com
Loading...