Graco 24F214, 24F215 User Manual

Kit Instructions

Suction Kit for
Pressure Washers

Kit 24F214: Suction Kit, 1/4 NPT
Kit 24F215: Suction Kit, 3/8 NPT

Important Safety Instructions

Read all warnings and instructions in the
pressure washer manual. Save these instructions.

3A0913A

EN

1234 5

Parts List

Ref. Part Description Qty.

1 824129 VALVE, EZ Start, 1/4 NPT (Kit 24F214) 1

804576 VALVE, EZ Start, 3/8 NPT (Kit 24F215) 1
2 803005 STRAINER, suction 1
3 804556 HOSE, suction 1
4 16F360 PLUG (Kit 24F214) 1

16F361 PLUG (Kit 24F215)
5 804275 HOSE, chemical injector 1

ti17851a

Installation Instructions

NOTE: For 262326 (4043 BD) units, skip to step 6.

1. Remove hex plug from the pump manifold using the
wrench size listed in table 1.

ti17842a

2. Install tapped hex plug (4) supplied with kit and torque
to the specification in Table 2.

4. Remove elbow fitting from the pump.

ti17845a

5. Install pressure gauge in the tapped valve cover.

ti17843a

3. Remove pressure gauge from elbow fitting.

ti17844a

ti17846a

6. Install the bleeder valve (1) into the pump in the previ­ous pressure gauge location. For 4043 BD units the
plug must be removed prior to installing the bleeder
valve.

ti17847a