Goodmans GTV51N16DVD Instruction Manual
GTV51N16DVD
21”(51cm)COLOUR TELEVISION
WITH DVD PLAYER
INSTRUCTION MANUAL
GOODMANS HELPLINE
0 870 873 0080
CONTENTS
Before Operation
GTV51N16DVD .....................................2
Warning and cautions............................................................................3
.................................................................................4
Using the remote control.......................................................................7
Basic operation
Switching on/off the TV set ..................................................................8
Searching channels................................................................................9
Full automatic mode............................................................................9
Semi-automatic search.......................................................................10
Manual fine tune..................................................................................11
Program skip ......................................................................................12
Watching TV .........................................................................................13
Watching TV program.........................................................................13
Program swap and auto scan functions..............................................14
Convenient picture and sound control functions.............................15
Multiple picture modes ......................................................................15
Black stretch and noise reduce..........................................................16
Mute ...................................................................................................17
Time functions......................................................................................18
Clock setting and timer on/off functions...........................................18
Sleep timer and program preset ......................................................19
Setup function ....................................................................................20
Screen saver and childlock functions.................................................20
AVL and calendar functions ...............................................................21
Position exchange function................................................................22
Teletext..................................................................................................23
DVD Operation
Basic Playback......................................................................................25
Advanced Playback..............................................................................26
Special Function Playback...................................................................27
DVD System Setup................................................................................28
Playable Discs.......................................................................................32
Disc Protection and DVD Characteristics...........................................33
Others
Connection to the external audio and video equipment...................34
Trouble shooting guide........................................................................35
Specifications........................................................................................36
ADDITIONAL INFORMATION
Location of controls
21
GTV51N16DVD ADDITIONAL INFORMATION
On some DVD disc formats the navigation (arrow buttons) buttons on the remote may
not operate. In such cases please press the "TITLE" button on the remote then operate
the arrow / navigation buttons on the remote controller.
DVD Function Button Please note the DVD function button on the remote control
switches the unit between TV and DVD, after watching a DVD Disc press the DVD
button to return to TV mode.
2
22
Warning and cautions
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The graphic symbols on the back cover of the set mean the following:
The lightning flash with arrowhead symbol within an equilateral triangle is intended to
alert the user to the presence of uninsuiated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
INSTALLATION
LOCATE the receiver in the room where direct light does not strike the screen. Total darkness or
a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended
for comfortable viewing. ALLOW enough space between the receiver and the wall to permit
proper ventilation. AVOID excessive warm locations to prevent possible damage to the cabinet or
component failure.
CONNECTION
This TV receiver can be connected to 230V- 50Hz, NEVER connect to DC supply or any other
power.
AUTOMATIC DEGAUSSING
All colour television receivers are sensitive to magnetic influences, usually caused by either
moving the receiver from one place to another or using certain electrical appiiances near the
receiver. This residual magnetism as it is called, sometimes causes distortion which gives rise to
"blotchy" areas of colour in the picture. To avoid these effects the receiver incorporates an
automatic degaussing circuit which operates for a short while immediately each time the receiver
is switched on using the mains switch. This circuit removes any residual magnetism in the metal
parts of the picture tube and therefore ensures that each time the receiver is switched "ON"
using the Mains switch, the purity of the colours displayed on the screen remain true and lifeiike.
If the set is moved or faced in a different direction, the mains switch must be switched off at least
10 minutes in order that the automatic degaussing circuit operates properly.
3
Warning and cautions
CAUTION
Never tamper with any components inside your set, or any other adjustment controls not mentioned
in this manuai. All television receivers are high voltage instruments. Your PICTURE TUBE is highly
evacuated. Ifbroken, glass fragments will be violently expelled. Scratching, shipping or undue
pressure is dangerous and should be avoided. When you dust or wipe the PICTURE TUBE FACE
or CABINET, the power cord should be pulled out from the wall then wipe the receiver with a dry
soft cloth. Ali "inside work" on your receiver should be performed only by Professional Service
Personnel.
DANGER
LASER SAFETY
This unit employs an optical laser beam system in the
CD mechanism, designed with built in safeguards. Do
not attempt to disassemble, refer to qualified service
personnel. Exposure to this invisible laser light light
beam may be harmful to the human eye.
THIS ISA CLASS-1 LASER PRODUCT. USE OF
CONTROLS, OR ADJUSTMENTS OR PROCEDURES
Invisible laser radiation when open
and interlock failed or defeated. avoid
direct exposure to laser beam.
OTHER THAN THOSE SPECIFIED HEREIN, MAY
RESULT IN HAZARDOUS LASER LIGHT BEAM
CLASS 1
LASER PRODUCT
Manufactured under license from Dolby Laboratories "Dolby", "Pro Logic" and the double-D symbol
are trademarks of Dolby Laboratories. Confidential unpublished works. c.1992-1997 Dolby
Laboratories, Inc. All rights reserved.
4
IMPORTANT SAFEGUARDS PREFITTED MAINS PLUGS
For you convenience a mains plug has been fitted to this appliance. For your safety please observe
the following information.
1. Should the fuse in the plug fail remove the plug from the wall socket and replace the fuse with a
5Amp ASTA approved to BS 1362 fuse.
2. Never use the plug without the fuse cover fitted. Replacement fuse covers are available from
your dealer or most electrical retall outlets.
3. If the mains plug is out off the cable, rewire the replacement plug in accordance with instruction
give in this manual.
4. CAUTION: Under no circumstances should the discarded plug be inserted into the mains socket.
To prevent a shock hazard carefully dispose of the discarded plug. Do not leave the plug lying
around where children might see it. WARNING: To prevent fire or shock hazard do not expose this
unit to rain or moisture.
CAUTION: DANGEROUS VOLTAGES EXIST INSIDE THIS UNIT DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL. DISCONNECT FROM MAINS SUPPLY WHEN NOT IN USE.
This wires in this mains lead are coloured in accordance with
the following wiring codes:
Blue................................... Neutral
Brown................................... Live
This wires in this mains lead must be connected to the
terminals in the plug as follows:
Blue Wire........................... N or Black Brown
Wire.......................... L or Red
BLUE
(Neutral)
BROWN
(Live)
Only a 5Amp fuse should be fitted in the plug fuse or at the distribution board.
WARNING: UNDER NO CIRCUMSTANCES MUST THE LIVE OR NEUTRAL
WIRES BE CONNECTED TO THE EARTH TERMINAL IN A 3- PIN MAINS
PLUG.
This symbol means that this unit is double insulated. An earth connection is not
required.
5
1. Remote control receiving window
2. Menu Button
3. Open / Ciose Button
4. Volume Button(V-)
5. Volume Button(V+)
6. DVD Play/Pause Stop Button
7. Channel Button(P-)
10
14
13
1
12
9
3
6
2
11
8
7
4
5
15
8. Channel Button(P+)
9. DVD Fast reverse / Fast forward
10. TV l DVD Button
16
11. Indicator
12. Main power switch
COAXIAL
13. Video in
DVD EXT
TV EXT
14. R / L Audio in
15.Speaker
17
18
19
16. Digital Audio coaxial output
17. Scart Connector(DVD output)
18. Scart Connector(TV input and output)
19. 75 ohm Antenna Socket
1. Front AV: AV1 signal input in TV mode.
2. Scart Connector(TV input and output): in TV mode, containing one AV2 signal input, one RGB
signal input and one AV output.
3. Scart Connector(DVD output): in DVD mode, containing one AV (CVBS) output.
4. Coaxial: in DVD mode, coaxial signal (digital and audio) output.
6
Using the Remote Control
P+
MENU
P-
PAUSE/STEP
REPEAT
TITLE/PBC
D.CALL
OPEN/CLOSE
MUTE
TV/AV
-/---/--
TV/DVD
TUNE
A-B
SLOW
SEARCH
EXIT
7
POWER ZOOM
10+
SCAN SWAP CALL
1 2 3 4
5 6 7 8
99 00
I/II
V- V+
AUDIO P.STD
STOP
SETUP
REV FWD . PREV NEXT
D.MENU
PLAY/ENTER
ANGLE
PROGRAM
SUBTITLE
PICTURE SOUND TIME FUNCTION
Buttons on the remote control
Stand By
DVD Open/close
DVD 10+
Scan
Zoom
Mute
Former Program
Call Screen Display
Program Number
Nicam / A2
TV/AV Exchange
Digital Selector
TV/DVD
Volume/Channel Selection
MENU
DVD Audio
Picture Mode
DVD STOP
Tune Menu Button
DVD SETUP
DVD PAUSE/STEP
DVD FAST REVERSE
DVD FAST FORWARD
DVD MENU
DVD NEXT
DVD PREVIOUS
DVD REPEAT
DVD PLAY/ENTER
DVD A-B REPEAT
DVD Cursor Move button
DVD SLOW
DVD ANGLE
UP
LEFT
DOWN
DVD SEARCH
DVD PROGRAM
DVD TITLE
DVD SUBTITLE
DVD CALL
(No available)
TELETEXT BUTTONS
Exit Screen Display
PICTURE MENU BUTTON (Red)
Green Button
(Available when in teletext mode only)
FUNCTION MENU BUTTON (Blue)
TIME MENU BUTTON (Yellow)
RIGHT
Switching on/ off the TV set
This section explains the use of the power button and remote handset
to turn your unit on and off.
Switching on/ off the TV set
Switching on/ off the TV set
1 Press the Power switch on. The power
indicator will light.
2 If the indicator is "Red" press the button
on the remote control. Alternatively you
can turn the TV on with P+ or P- buttons,
if the"Child lock" is not set .
Note
1 To turn the set off to "Standby " press
button on the remote control.
4
AUTO
I
POWER
2 To turn off the TV fully, press the Power button
and release.
Auto switch-off function
Should the signal input from the aerial be
interrupted for more than 5 minutes, the TV
will automatically switch to "Standby".
If the Tv is in A/V mode or the "background"
is set to off (see page 18), the set will not
switch to standby.
8
Searching channels
This TV set has three methods to set the channels, which are respectively
automatic, semi automatic and manual fine TUNE.
In this section, how to use the remote control to set the channel is
explained. You can also use the buttons on the TV to set the channel.
Full automatic mode
Automatic search
TUNE
P+
MENU
V- V+
P-
1 Press the TUNE button, the
TUNE menu shown on the right
display on the screen.
Press the P+/-
2 buttons to
select "AUTO SEARCH".
3 Press V+ to start the Auto
search. All channels will be
stored in the order they are
received. After the search
has finished, the first channel
received will be displayed.
TUNE
COLOUR AUTO
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
TUNE
COLOUR AUTO
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
6
AUTO SEARCH
152.25MHz
CALL
Display function
Press the CALL button, then
the channel number and the
systems will be displayed on
the screen.
9
3
AUTO
I
9
Searching channels
Continued
Semi-automatic search
Semi-automatic search
1 Press the P+/- buttons or
PROGRAM NUMBER 0-9
buttons to choose desired
channels I.E. channel 1
1
AUTO
I
TUNE
P+
MENU
V- V+
P-
2 Press the TUNE button, the
TUNE menu will be shown on
the right of the screen.
3 buttons to
Press the P+/-
select " SEARCH".
4 Press the V- /V+ buttons to
start search.
TUNE
COLOUR AUTO
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
6
Press the V- to search down
the scale and V+ to search up
the scale.
SEARCH
152.25MHz
EXIT
To turn off the on-screen menu
In general, after you press the MENU button, the menu
, FUNCTION, TUNE, EXCHANGE,
display (PICTURE, TIME
ETC.) will automatically disappear within 15 seconds. If you
want to eliminate these contents immediately, please press
the EXIT button.
10
item
Searching channels
Continued
Manual fine tune
Manual fine tune
If the picture and/or sound are poor, try using the FINE
TUNE feature. Do not use this feature unless
reception is poor.
P+
MENU
V- V+
P-
TUNE
P+
MENU
V- V+
P-
1 Press the P+/- buttons or
PROGRAM NUMBER 0-9
button to choose desired
channels I.E. channel 1
2 Press the TUNE button, the
TUNE menu shown on the right
display on the screen.
3 buttons to
Press the P+/-
select " FINE TUNE".
4 Press the V-/+ buttons all
through to carry out fine tune,
till the best picture and sound
are obtained.
1
AUTO
I
TUNE
COLOUR AUTO
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
5
FINE TUNE
152.25MHz
11
Loading...