Remote control5Remote control operation range6Battery installation for the remote control6
Connections7
Connecting the power7Inputting external media source7
Inserting a memory card 7
Inserting a USB device 7
Inserting iPod 8
AV In 8
Line In 8
Outputting signals9
Connecting with AV equipment 9
Connecting with audio quipment 9
Basic Operation10
iPod mode10Viewing photos and slide show11
Thumbnail mode11
Rotation12
Playing MP3 music12 Playing a movie 12AV In mode13Line In mode13Setup mode13
Troubleshooting
14
2
Safety Information and Notice
Important Safety
Precautions
• Keep away from water or moisture
and dusty areas.
• Ambient Temperature 0~40°C.
Never store in hot and very cold
areas.
• Care must be taken not to drop the
unit.
• Do not try to open the case alone
without technical support.
• Connect the AC adapter to the DC
IN jack and to power outlet.
• Only use attachments/accessories
specied by the manufacturer.
• When left unused for a long period of
time, the unit should be unplugged
from the household AC outlet.
Warning: To reduce the risk
of re or electric shock, do not
expose to rain, moisture, dripping
or splashing.
Compatibility
• This device supports iPod 4th/5th
generation iPods including the
special edition U2 and HP iPods,
the iPod mini 1st/2nd and iPod nano
1st/2nd. This device doesn’t support
the latest iPod series including the
iPod classic, iPod Touch and iPod
nano 3
• This device supports the following
le formats: JPEG, MP3 and
MPEG4(*.avi). Please note that
not all images, audio and MPEG4
formats are compatible with this
device. If playing other formats,
please convert the les to a
supported format on your computer.
rd.
This symbol on the product or in the instructions means that your electrical and
electronic equipment should be disposed at the end of its life separately from your
household waste. There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you
purchased the product.
• Before attempting to connect, operate or adjust this product, please save and read the User
Guide completely.
3
Product Overview
Top
1 2 3 4 5
6 789
Front
10
11
12
Rear
17 18 19 20
1
USB Jack
2
SD/MMC/MS Slot
3
iPod Dock connector
4
MODE/ STOP button
5
Cursor buttons
(Up/Down/Right/Left)
6
Power ON/OFF switch
The LED indicator lights up in green
when the power is turned on, no
light when the power is turned off.
7
Power LED indicator
8
3D Surround button
Press this button to simulate a
virtual three-dimensional surround
sound.
9
PLAY/Pause/conrm button
10
LCD screen
11
Remote sensor
12
Speakers
13
16151413
Earphone jack
14
LINE-IN jack
15
Volume +
16
Volume -
17
DC-IN jack
18
Battery connector
19
Composite AV in jack
20
Composite AV out jack
4
Remote Control
Remote control
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1. MENU button
2. CURSOR buttons
Up/Down/Left/Right buttons
Note: Pressing <
> button go
back to the previous menu or
press <
> button to go to the
next level of menus when using
iPod.
3. LCD button
4. F.BWD button
5. VOLUME + button
6. PREVIOUS button
7. MUTE button
8. SETUP button
9. OK button
10. MODE/STOP button
11. F.FWD button
12. Next button
13. PLAY/PAUSE button
14. 1/ALL REPEAT button
During playback, press <
1/ALL
ton repeatedly to select the following options:
Track: Repeat within a track
Folder: Repeat within a folder
All: Repeat all les
OFF: Repeat off
15. VOLUME - button
> but-
Note: The remote control can operate
the iPod even if the iPod’s Hold
switch is ON.
5
Remote Control-continued
+
CR2025
Remote control operation range
Point the remote control unit no more
than 6 meters from the remote control
sensor and within 60° of the front of
the unit. The operating distance may
vary according to the brightness of the
room.
30°
30°
Remote
Sensor
Battery installation for
the remote control
Insert the battery and match the (+)
and (-) on battery to the marks inside
the battery compartment. Remember
to remove the plastic insulating strip
from the battery before rst use.
Note:
• The battery in the Remote Control
normally lasts for about one year,
although this depends on how
often and for what operations the
Remote Control is used.
• If the remote control unit fails to
work even when it is operated
near the player, replace the
battery.
• Use a 3V lithium battery
(No. CR2025 or equivalent).
6
Connection
MMC
SD
MS
Connecting the power
• Plug the power adapter into an
outlet.
• Use only with the speci ed power
adapter (12Vdc, 1.66A).
Inputting external
media source
• This device can only play one media
you input at a time. If more than one
input source is connected, press
(remote control) or (device) button
to select which source you want to
play.
• This device can only play JPEG,
MP3 and MPEG 4*.avi formats.
Not all images, audio and MPEG4
format les are compatible with this
device. If the les cannot be played
in this device, please convert these
les to readable formats using your
computer.
MODE
Inserting a memory card
• Insert your memory card into the
appropriate slot according to the
orientation marked on the machine.
Inserting a USB device
• Insert an USB memory stick into the
USB port.
Note: this port can not connect to
PC directly.
7
Connection-continued
Inserting iPod
• Insert an iPod into the iPod dock
connector. Please select the
supplied iPod dock according to
your iPod model, then t it onto
the device's iPod connector before
connecting iPod.
• Before inserting your iPod into the
iPod dock, please refer to the table
below to select an adaptor. Each
adaptor is labelled with a number as
shown in the table.
iPod nano 1,2 Generation1
iPod mini 1,2 Generation2
iPod video 30GB3
iPod photo 30GB4
iPod video 60GB, 80G, Colour 20G5
iPod photo 40GB, 60GB6
AV In
• Input AV source from other AV
device (e.g. Camcorder) with
connection to Audio/Video input jack.
• Be sure to match up the correct
colour with the cable connectors.
Yellow Red White
3.5mm AV cable
Camcorder
(Example)
Line In
• Input audio source from MP3
Player’s earphone jack to the device
Line-In jack with 3.5mm audio cable
(not supplied).
Note: The iPod will be automatically
charged when connected to the
power socket whether the power is
ON or OFF.
8
Connection-continued
Outputting signals
Connecting with AV equipment
• Connect AV-OUT jack with other AV
device’s AV IN jack via AV cable.
• Be sure to match up the correct
colour with the cable connectors.
White Red Yellow
3.5mm AV cable
White Red Yellow
TV (Example)
Connecting with audio
equipment
• Connect the earphone jack to
earphones with 3.5mm audio cable.
CAUTION:
To avoid possible damage to your
hearing, do not play earphones at
a high volume for long periods of
time.
Earphone (Example)
9
Basic Operation
• After turning on the power, the main
operation page will be appeared
on the screen. Press
/
/
/
buttons to select iPod, Photo, Music,
Movie, AV IN, Line IN, or Setup
functions.
• Please refer to the following table to
select the proper mode to play the
les.
ModeDisplay format
Photo:JPEG
Music:MP3
Movie:MPEG 4*.avi
Please note that not all images, audio and MPEG4
formats are compatible with the device.
• This device can only display one
storage media’s contents at a time.
If more than one input source is
MODE
connected, press <
> to select
which source you want to play. If
you insert SD/MMC card and USB
pen drive at same time, the device
will only play the les from SD/MMC
card. To play the les from USB pen
drive, please remove the SD/MMC
card.
• When you input the external signals
via AV composite jack or audio
cable, only the volumes can be
adjusted (AV In and Line In mode).
iPod Mode
1. Plug iPod into iPod dock (for
connection details, refer to page 8).
2. Press the Power switch ON.
buttons to select
/
/
3. Press
press
4. Press
to the previous menu or press
button to go to the next level of
menus. Press
select the item you wish to perform.
5. To view photos:
• Press
photo you wish to playback when
you are in thumbnail mode, then
press
photo by full screen on the iPod.
Press
device screen.
• In slide show mode, photos are
accompanied with background
music. You can not select the
previous or next song while you are
in the slide show mode. Press
/
6. To play music/video (using remote
control):
• Press
a music/video le you wish to
playback, then press
Press
le on the device screen.
• It is suggested to use the audio
format preference in following
order: Apple lossless, ACC then
MP3.
/
iPod from the main menu, then
OK
.
MENU
button can go back
or
buttons to
or
buttons to select the
/
OK
to display the selected
OK
again to display on the
to go to next or previous photo.
buttons to select
/
OK
to play.
OK
again to display the video
10
Basic Operation-continued
Note:
1. To play music/video les using
the device’s cursor buttons,
press the
button to return to
the previous menu and press
buttons to select the le you
/
wish to play. Press
button to
play the le.
2. Full screen display with this
device is not available for iPod
shufes and nanos because
these iPod models do not
support CVBS signal output.
3. When iPod is inserted into this
device, it is suggested that the
iPod settings should be set as
below:
To view photo Photos Slide show
Settings TV Out On
To play music Settings EQ
Classical
To play music Settings Sound
Check On
To play video Videos Video Settings TV Out On
Viewing photos and
slide shows
1. Turn the POWER switch to ON.
buttons to select
/
/
2. Press
then press OK.
3. The slide show starts to play.
4. To pause the slide shows, press
button.
• Displaying pictures bigger than 480
x 234 will take longer to load.
• When the device is not operative in
few second, the screen saver will be
activated automatically. To stop the
screen saver, press any button on
the device or remote control.
Thumbnail Mode
1. Press
Thumbnail mode when you are in
the slide show mode.
2. Press
Up” or “Page Down” if more pages
are selectable, then press OK.
Alternatively, press
to navigate from page to page.
3. Press
the photo you wish to play, then
press OK button to display the
selected photo by full screen.
4. Press
the main menu.
/
Photo from the main menu,
MODE
MENU
or
button to enter
buttons to select “Page
/
or
buttons
buttons to select
/
/
/
MODE
button again to return to
Thumbnail Mode Page: 1/1
Page Down Page UP1024x768 2007/05/23
Note: Refer to
Setup mode to
set up the slide show settings
(page 13).
11
Basic Operation-continued
Rotation
buttons to select
/
/
1. Press
the photo in the thumbnail mode.
2. Press OK button to enter full screen
display mode.
3. Press
photo 90 degree clockwise, press
degree counterclockwise. Press
horizontally, press
rotate the photo vertically.
4. The rotated picture will restore to
its original rotation angle when you
press
menu.
/
button to rotate the
button to rotate the photo 90
button to rotate the photo
button to
MODE
button to return the main
Playing MP3 music
1. Turn the POWER switch to ON.
2. Press
/
buttons to select
/
/
Music from the main menu,
OK
then press
button.
3. The music starts to play
automatically.
-
4. Press
decrease the volumes.
5. To stop playing, press
+
/
button to increase or
MODE
button.
• If selecting a folder, the folder list will
display on the left screen and the le
buttons
list on the right. Press
/
to enter the left or right screen, and
buttons to select the le
then
/
you wish to play.
Playing a movie
1. Turn the POWER switch to ON.
buttons to select
/
/
2. Press
then press
will be played automatically.
3. Press
decrease the volumes.
4. To stop playing, press
• If selecting a folder, the folder list will
display on the left screen and the le
list on the right. Press
to enter the left or right screen, and
then
you wish to play.
/
Movie from the main menu,
OK
button. The movie le
-
+
/
button to increase or
MODE
button.
buttons
/
buttons to select the le
/
12
Basic Operation-continued
AV In mode
1. Turn the POWER switch to ON.
2. Input AV source (for connection
details, refer to page 8).
3. Press
/
buttons to select
/
/
AV In from the main menu,
then press OK button to display the
media les inputted from external
device.
Line In mode
1. Turn the POWER switch to ON.
2. Insert
3. Press
Note: When you input external
signals via AV composite jacks
or audio cable, only the
In and Line In mode. Besides, the
screen will remain black screen
after connecting with external
signal.
audio source using 3.5mm
audio cable (for connection details,
refer to page 8).
buttons to
/
/
/
select
Line In from the main
menu, then press OK button to play
the music inputted from external
device.
• Check to make sure the power plug is plugged into the power outlet.
• Make sure there is power to the outlet.
Unable to view photos
• Not all JPEG les are compatible. Please open the les in the computer and resave them as JPEG
les and try to playback in the device.
• Check if using compatible memory cards.
If picture display seems slow
• Use lower resolution picture.
Unable to view lms
• Not all MPEG 4(*.avi) les are compatible. Please open the les in the computer and convert into
readable formats.
Memory card
• If you want to insert MS Duo, MS Duo Pro, M2 or MS PRO-HG card into this device, use only with
Memory Stick Duo Replacement Adapter or Memory Stick Micro Adapter (not supplied).
• This device does not support SDHC card.
iPod does not respond to the device
• Check the connection, if the iPod is not installed properly. Remove the iPod and reinsert the iPod
into the iPod dock connector.
• Check any obstruction on the iPod or device’s dock connectors.
iPod does not recharge
• The iPod may be not installed properly. Remove and reinsert the iPod into the iPod dock connector.
• Verify that the iPod is working before inserting into device’s dock connector.
Remote control does not respond
• Check the battery if the remote control does not work.
• Check the battery is installed with the correct polarities (+ and –).