Goldstar R8000, R1003 Owner’s Manual
website http://www.lgservice.com
e-mail http://www.lgeservice.com/techsup.html
ROOM AIR CONDITIONER
OWNER'S MANUAL
Please read the operating instructions and safety precautions
carefully and thoroughly before installing and operating your
room air conditioner.
MANUEL D'UTILISATION
CLIMATISEUR DE FENI_TR
Veuillez lire attentivement et en entier ce guide d'utilisation
et les mesures de s6curit6 ci-incluses avant de proc6der
I'installation et au fonctionnement de votre climatiseur.
ACONDICIONADORDEAIREDEVENTANA
MANUAL DEL PROPIETARIO
Por favor lea las instrucciones de operaci6n y las precauciones
de seguridad cuidadosa y totalmente antes de instalar y operar
su acondicionador de aire de ventana.
MODELS, MODELES, MODELOS: R8000, R1003
FOR YOUR RECORDS
Stapleyour receipt to this page in caseyou need it later.
Writedown the model and serial numbers here:
Model #
Serial#
You can find them on a label on the side of each unit.
Dealer'sName
DatePurchased
READ THIS MANUAL
Inside you will find many helpful hints on how to use and
maintain your air conditioner properly, Just a little preventive
care on your part can save you a great deal of time and
money over the life of your air conditioner,
You'll find many answers to common problems in the chart
of troubleshooting tips, If you review our chart of
Troubleshooting Tips first, you may not need to call for
service at all,
CAUTION
•Contact the authorized Service technician for repair or
maintenanceof this unit.
•The air conditioner isnot intended for use by young
children or infirm persons without supervision.
•Young children should be supervised to ensure that they
do not playwith the air conditioner.
c ..z..AIT,_
o
Safety Precautions
To prevent injury to the user or other people and property damage, thefollowing instructions must be
followed.
• Incorrect operation due to ignoring of instruction will cause harmor damage. The seriousness is classified
by the following indications.
/_ WARNING " This symbol indicates the possibility of death or serious injury. /
//_ CAUTION . This symbol indicates the possibility of injury or damage to
• Meanings of symbols used in this manual are as shown below.
• properties only,
Be sure not to do.
J
• Otherwise, it will cause electric
shock or fire due to heat
generation.
Be sure to follow the instruction.
• It will cause electric shock or fire
due to heat generation.
• It will cause electric shock or fire.
• Ifthe powercordis damaged,it must
be replaced by the manufactureror
an authorizedservice centeror a
similarlyqualifiedpersonin order to
avoid a hazard.
J
• It will cause electric shock or fire • Itwill cause electric shock.
due to heat generation.
• This could damage your health.
J
c.uT o.l
• It may cause an injury.
®
• Since the fan rotates at high
speed during operation, it may
cause an injury.
®
• Water may enter the unit and • An oxygen shortage may occur.
degrade the insulation. It may
cause an electric shock.
• This could injure the pets or
plants.
• Do not use this air conditioner to
preserve precision devices, food,
pets, plants, and art objects.
It may cause deterioration of
quality, etc.
• It may cause an electric shock.
• It may cause a fire or deformation
of the cabinet.
))
®
• It may cause imperfect
combustion.
J
About the Controls on the Air Conditioner
The controls will look like one of the following.
Controls
Operation
off
Med _ High
Off - Turns air conditioner off.
Med Fan - Med speed fan operation without cooling.
Low Fan - Lowspeed fan operation without cooling.
Fa___ol
Low__od
Fan Cool
LowCool
Thermostat
5
4 _ 6
High Cool - Cooling with high speed fan operation.
Med Cool - Coolingwith med speed fan operation.
Low Cool - Coolingwith low speed fan operation.
This automatically controls the temperature of the indoor air.
Turnthe knob so that arrow points to the higher numberfor greater
3"_'7 i
cooling. Pointthe arrow to the lower number for more moderate
cooling.
2 - _7©c _-8 _
• FOR NORMAL COOLING
1. Turnthe Operation Knob to the HighCool from the Low Cool setting.
2. Set the Thermostat control to the desired temperature mark _(the mid-point is a good starting position). If
the room temperature is not satisfactory after a reasonable time, adjust the control to a cooler or warmer
setting, as appropriate.
• FOR MAXIMUM COOLING
1. Turnthe Operation Knob to the HighCool setting.
2. Set the Thermostat control to the highest temperature mark "9 .
• FOR QUIETER OPERATION
1. Turnthe Operation Knob to the LowCool setting.
2. Setthe Thermostat control as needed.
When the air conditioner has been performed its cooling operation and is turned off or set to the
fan position, wait at least 3 minutes before resetting to the cooling operation again.
Loading...