Goldstar R2403, R2402, R2103, R2102, R1803 Owner’s Manual
...
websitehttp:Ywww,lgservice.com
e-mail http:Ywww.lgeservice.com/techsup.html
ITI
E 'S
Please, read the operating instructions and safety precautions
carefully and thoroughly before installing and operating your
room air conditioner.
U
L
MANUEL 'UTILIS
CLI TISE E
Veuillez life a_entivement et en entier ce guide d'utilisation
et les mesures de securite ci-incluses avant de proceder
I'installation et au fonctionnement de votre clirnatiseur.
I
L
IC!ONA
EL
F
NE
I N
A
ET E
I0
Por favor lea las instrucciones de operacion y las precauciones
de seguridad cuidadosa y totalmente antes de instalar y operar
su acondicionador de aire de ventana.
MODELS, MOIDELES, MODELO::
R1402, R1802, R2102, R240,2, R1803, R2103, R2403
FOR YOUR RECORDS
Staple your receipt to this page in case you ne_ it later.
Write down the.model and serial numbers here:
Model #
You can find them on a label on the side of each unit,
_aler's Name
DatePurchased
READ THIS MANUAL
Inside you will find many helpful hints on how to use and
maintain your air conditioner properly. Just a little preventive
care on your part can save you a great deal of time and
money over the life of your air conditioner.
You'll find many answers to common problems inthe chart
of troubleshooting tips Ifyou review our chart of
Troubleshooting Tips first, you may not need to call for
service at all.
• Contact the authorized Service technician for repair or
maintenance of this unit.
• The air conditioner is not intended for use by young
children or infirm persons without supervision.
• "Youngchildren should be supewised to ensure that they
do not play with the air conditioner.
T
fety Pre utions
To prevent injury to the user or other p_pie and property damage, the following instructions must be
follow_.
m Incorrect operation due to ignoring of instruction will cause harm or damage+ The seriousness is classified
by the following indications.
Z_ WARNING " This symbol indicates the possibility of death or serious injury, /
Z_ CAUTION . This symbol indicates the 13ossibiNty of injury or damage to
II Meanings of symbols used in this manual are as shown below.
_ Be sure to follow the instruction.
" properties only.
J
f L J
• Otherwise, it will cause electric
shock or fire due to heat
generation.
• It will cause electric shock or fire . Itwill cause electric shock.
due to heat generation.
r _ WARNING 1
• it will cause electric shock or fire
due to heat generation.
• Itwillau_ electrics_ck or fire.
•Ifthepowercordis da_ged, it must
replacedbythemanufacturer
an authorizedservicecenteror a
similarlyqualifiedpersoninorderto
avoida hazard,
• Thiscould damage your health,
®
I c ,o.1
, It may cause an injury,
,Since the fan rotates at high
speed during operation, it may
cause an iniury,
• Water may enter the unit and , An oxygen shortage may occur.
degrade t6e insulation. It may
cause an e]ectr[,c shock.
i
i
i
. This couldinjure the pets or
plants.
. Do not use this air _ndifloner to
Feserve precision devices, food,
_ts, plants, and art objects,
It may cause deteriorat_on of
quality, etc.
• it may cause an electric shock.
J
. It may cause a fire or deformation , It may cause imperfect
of the c_inet, combustion.
About the ntrols on the Air Conditioner
The controls will look like one,of the following.
i
Thermostat
Off
M_ _n
Low _n
High COol
M_ Cool
LowCool
This automatically controls the temperature of the indoor air.
Turn the knob so that arrow points to the larger marks for greater
cooling. Point the arrow to the simaller marks for more moderate
cooling.
(i.e. the higher number the greater _oling)
- Turns air conditioner off.
oMed speed fan operation without cooling.
oLow speed fan operation without cooiing.
oC_ling with high speed fan operation..
- C_ling with reed speed fan operation
- C_ling with low speed fan operation.
• FOR NORMAL COOLING
1. Turn the Operation Knob to the High Cool from the
Low Cool setting.
2. Set the Thermostat control to the desired
temperature mark i (the mid-point is a good
starting position). If the room temperature is not
satisfactory after a reasonable time, adjust the
control to a cooler or warmer setting, as
appropriate.
• Auto Swing
On : Air swing is operated while Operation knob
is set to the _1 position.
Off : Stops the operation of air swing
4_
3_
• FOR MAXIMUM COOLING
1. Turn the Operation Knob to the High C_I setting
2. Set the Thermostat control to the largest ,_,
temperature mark.
• FOR QUIETER OPERATION
1. Turn the Operation Knob to the Low Cool setting.
2. Set the Thermostat _ntrol as needed.
When the air conditioner has been performed
its cooling operation and is turned off or set
to the fan position, wait at least 3 minutes
before resetting to the cooling operation
again_
Loading...