Goldstar fj-x4ax Service Manual adj

MODEL:FR-X4A
ADJUSTMENTS(TUNER)
This set has been aligned at the factory and normally will not require further adjustment. As a result, it is not recommended that any attempt is made to modificate any circuit. If any parts are replaced or if anyone tampers with the adjustment, realignment may be necessary.
1. ADJUSTMENT & TEST POINT
2. AM IF ADJUSTMENT(on P.C. Board)
AM Mode Condition Test Point Adjustment Adjust for
603kHz MOD. 30% Speaker L201 Maximum
3. FM 0 Volt Adjustment(on P.C. Board)
FM mode Contion Test Point Adjustment Adjust for
90MHz 60dB Between point L204 0 100mV
Terminal
R214
- 7 -
Dual-trace synchroscope
Electronic Voltmeter
Speaker Terminal
Head
Test Tape MTT-114
L ch
R ch
L out
R out
Unit
CH1
GND
CH2
Playback Mode
Speaker Terminal
Unit
Playback Mode
Frequency Counter
Head
Test Tape MTT-111N
Record/Playback head
GND
Speaker Terminal
Unit
Playback Mode
Frequency Counter
Head
Test Tape MTT-111N
Record/Playback head
GND
MODEL:FJ-X4
ADJUSTMENTS
1. AZIMUTH ADJUSTMENT
Deck Mode Test Tape Test Point Adjustment Adjust for
Playback MTT-114 Head Screw R/L Maximum
Speaker Terminal
(Azimuth Adjustment Connection Diagram)
2. MOTOR SPEED ADJUSTMENT
Deck Mode Test Tape Test Point Adjustment Adjust for
Playback MTT-114 3kHz 45Hz
Speaker Terminal
(Motor Speed Adjustment Connection Diagram)
Top side of mechanism
3. RECORD BIAS ADJUSTMENT
Deck Mode Test Tape Test Point Adjustment Adjust for
Rec MTT-5511 Erase Head Wire L381 80kHz 5kHz
(Record Bias Adjustment Connection Diagram)
- 8 -
Loading...