Goldmund TELOS 2500 User Manual

GOLDMUND TELOS 2500

UNIVERSAL POWER AMPLIFIER

GOLDMUND TELOS 2500

UNIVERSAL POWER AMPLIFIER

USER MANUAL

CONGRATULATIONS

Thank you for purchasing the GOLDMUND TELOS 2500.
You have acquired the best Universal Power Amplifier ever made for professional
and domestic uses. Please take some time to read this manual. It may provide you
with useful information to make your pleasure of listening to the TELOS 2500 even
higher.

ATTENTION :

- No connection or manipulation must be done before reading those instructions.
Damage of the amplifier may result if the following instructions are not consciously
understood and applied.

- This amplifier is protected against gray market transshipment. Only the
Goldmund local official distributor can install it for you or the amplifier will
stop to function properly after a period.

3

1 - UNPACKING

You will find in the GOLDMUND TELOS 2500 box :

- The amplifier

- The power cord

- This manual
Please keep the packaging in case you need to transport the amplifier at a later date
or if you have to send it for maintenance.

2 – CHOICE OF AMPLIFIER LOCATION AND COOLING

The GOLDMUND TELOS 2500 amplifier, as all high quality amplifiers generates a
large amount of heat if driven at high level.
It is mandatory to allow a proper cooling of the heat sinks. Avoid any location which is
not properly vented and avoid to put on top of it equipment sensitive to temperature.

Due to its weight, and to maximize the effect of the built-in "Mechanical Grounding"
construction, the TELOS 2500 is better located on the floor. But other very strong
supports can also be used, if they offer a very rigid transmission with the floor.

The TELOS 2500 is built on four very hard conical feet to insure proper vibration
transmission to the amplifier support in order to evacuate all detrimental vibrations
inside the amplifier, following the famous GOLDMUND "Mechanical Grounding"
principle.

Depending on the flatness of the surface where the amplifier will be located, you will
choose to screw in the four round flat feet of the amplifier to allow full contact of the
points with the support.

3 – LINE VOLTAGE ADJUSTMENT

There is no simple way to modify the line voltage of the amplifier.
If your line voltage is not adapted to the voltage indicated on the serial plate of the
amplifier, please consult your local GOLDMUND dealer for information. The change
cannot be made without a special training or the amplifier may be destroyed.

ATTENTION : On the 220V position, the GOLDMUND TELOS 2500 amplifier will
function properly for main line voltage in between 190V and 245V. On the 110V