GOLDMUND SR2.3
2 CHANNEL POWER AMPLIFIER
1
GOLDMUND SR2.3
2 CHANNEL AMPLIFIER
USER MANUAL
ATTENTION :
No connection or manipulation must be done before reading those instructions. Damage to the
amplifier may result if the following inst ru ctions are not consciously understood and applied.
2
1 - UNPACKING
You will find in the GOLDMUND SR2 box :
- The amplifier.
- The power cord.
- This manual and the warranty card.
- Accessories and spare fuses.
Please keep the packaging in case you need to transport the amplifier at a later date or if you have to
send it for maintenance.
2 - CHOICE OF AMPLIFIER LOCATION AND COOLING
The GOLDMUND SR2.3 amplifier, as all the high quality amplifiers may generate a large amou nt of
heat if driven into high power.
It is mandatory to allow a proper cooli ng of t he heat sink. Avoid any location which is not properly
ventilated and avoid putting other equipment on top of the amplifier.
3 - LINE VOLTAGE ADJUSTMENT
An AC line voltage selection is possible inside t he cha ssi s. Please ask your dealer for assistance if the
line voltage provided is not appropriate.
ATTENTION : On the 220V position, the GOLDMUND SR2.3 amplifier will function properly for AC
voltages in between 200V and 24 5V. On the 110V position, the AC lin e must deliver between 95V and
125V. If your AC line is usually out of these tolerances, please consult your GOL DMUND dea l er .
Please check the value of the mains line fuse . Th is fuse is located in the power cord receptacle. The
lid can be removed with a small screwdriver when the cord is removed.
Use a 5A slow-blow fuse for 220V and a 8A slow- blow fuse for 110V.
3