IMPORTANT: Please read before using and retain for future reference.
IMPORTANT NOTES
INTRODUCTION
• Thank you for buying our product.
• Please read through these operating instructions, so you will know how to operate your
equipment properly. After you nished reading the instructions manual, put it away in a safe
place for future reference.
1. BEFORE STARTED
1.1 NETWORK REQUIREMENT
Before using the IR167BT, the following requirements are needed:
• A broadband connection in combination with a wired/wireless access point, router or similar
network device.
• The network device needs to support WiFi (802.11b/g/n) wireless connection.
• A PC or smart phone with a network ready. This network has to be the same one as the
IR167BT equipped with.
1.2 SAFETY PRECAUTIONS
• Do not drop the IR167BT and do not expose it to liquid, moisture or humidity.
These might lead to damage to the device.
• If the IR167BT is moved from a cold environment into a warmer one, do let it adapt to the new
temperature before operate the device. Otherwise, it might lead to condensation and cause
malfunctions in the device.
• Do not us the IR167BT in the dust environment as dust can damage the interior electronic
components and lead to malfunctions in the device.
• Protect the IR167BT from strong vibrations and place it on stable surface.
• Do not attempt to disassembly the IR167BT.
• Only use the power cord delivered with the IR167BT.
• The socket outlet should be installed near the IR167BT and should be easily accessible.
• Never touch the power cord with wet hands.
• Make sure the electrical voltage specified on the IR167BT and its power plug is corresponding
to the voltage of the power socket. Incorrect voltage will destroy the device.
• If the IR167BT is not using for a long period of time, disconnect it from the power supply by
unplugging the power cord. This is to avoid the risk of fire.
• Never use any harsh or strong solvents to clean the IR167BT since these may damage the
surface of the device. Dry, soft cloth is appropriate, however, if the IR167BT is extremely dirty,
it may be wiped off with a slightly moist cloth. Make sure the device is dried off after cleaning.
• When you are necessary to ship the IR167BT, store it in its original package.
Save the package for this purpose.
WARNING: DO NOT USE THIS PRODUCT NEAR WATER, IN WET AREAS TO AVOID
FIRE OR INJURY OF ELECTRIC CURRENT. ALWAYS TURN OFF THE PRODUCT
WHEN YOU DON’T USE IT OR BEFORE A REVISION. THERE AREN’T ANY PARTS IN
THIS APPLIANCE WHICH ARE REPARABLE BY CONSUMER. ALWAYS APPEAL TO A
QUALIFIED AUTHORIZED SERVICE. THE PRODUCT IS UNDER A DANGEROUS TENTION.
EN - 2
2. APPEARANCE AND KEY DESCRIPTION
EN
Front View
1. Button
Press to return to the main menu
2. M button
Switch between audio sources
3. 2.4” TFT full color display
4. Power on/Standby button
5. Remote Sensor
12
4
5
3
Top View
678
9
10
11
6. < Left cursor / Previous button
7. Play/Pause button
8. > Right cursor / Next button
9. Preset 1, 2, 3, 4
10. Preset button
Press and hold to save the stations.
EN - 3
11. Volume/Navigate + OK dial
Adjust volume;
Cursor up/down;
Confirm selection
Back View
15
121314
12. USB port for charging (5 V,1 A)
13. 3.5 mm Earphone Jack
14. AC Socket
15. Telescopic Antenna
Remote Control
1. Mute button
2. Power on/Standby button
3. Button
Press to return to the main menu.
4. Increase volume button
5. Decrease volume button
6. button
Press to go back to previous track
7. button
8. Play/Pause button
Press to change to next track
9. Mode button
Press to go to main menu.
10. Up cursor button
11. Left cursor button
12. Right cursor button
13. Down cursor button
14. OK button
15. 0~9 call up favorites/memory;
Input letters and numbers
16. EQ button
17. INFO button
18. PRESET button
19. Sleep button
20. ALARM button
21. TIMER button
11
14
15
16
1
3
6
8
2
4
5
9
7
10
12
13
17
18
19
20
21
EN - 4
Remember to pull out the clear plastic tab from the battery compartment before using the remote.
To remove the battery from the remote, use your thumb to pull out the battery tray.
Replace it with a AA type battery.
Caution: Risk of explosion of battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Symbols on the display
Connection is being established, device functioning
No wireless connection
Wireless connection established
Search
VHF radio function selected
VHF radio reception: Mono
EN
VHF radio reception: Stereo
Speaker off
Alarm on
Internet radio station saved as favorite
FM radio station saved
3. GETTING STARTED
The packaging box contains the following items:
• IR167BT Internet Radio
• Remote Control
• AC Power Cord
• User Manual
GET THE NETWORK READY
• For wireless LAN(WLAN) network connection:
Check if WLAN LINK/ACT light of the wired/wireless access point or router is illuminated.
Consult the user guide of that for any questions.
Note: WiFi allows data transfer over short distances within 15 meters. Any walls
or ceilings may reduce the strength of the WiFi connectivity. Therefore try to
locate the IR167BT and/or the access point within the distance mentioned
above, and avoid any obstacles between two devices.
• Plug the power cord into the AC socket.
• When it is the first time running the device, the system will ask you to set Language
and Network Configurations.
EN - 5
• Select Yes to establish connection to the network.
• Select Yes(WPS)(only for WPS routers). Then press the WPS button on your router.
• Select No if you would prefer to listen to a terrestrial station or to use the speaker with
an external playback device.
If you answer ”Yes”, the display goes to scanning for Wireless Network and shortly afterwards
a list of available wireless networks will appear.
EN - 6
EN
The number of bars in the wireless symbol in front of the network name (SSID) shows the
relative signal strength of the network.
The key symbol indicated that the network is password-protected.
If the device does not nd any wireless networks, no wireless Networks Found appears on the
display. Change your location, if necessary, and check your WLAN router.
You can nd the SSID of your Access Point in the conguration of the Access Point (router).
Select your network and conrm with OK. If your WLAN is password-protected, you will be
prompted to enter your password.
Enter the password using the number and letter buttons of the remote control or enter it directly
on the device.
Note the use of upper and lower case when entering the password.
You can rotate reel to choose the code. If it is accidentally pressed , to move a redundant
entry, press to correct.
With Remote Control
The cursor indicates the current entry space.
Press the corresponding number button repeatedly:
0 (delete entry)
1 (space) @ ! # $ % & ( ) + - . / : ; < = > ? [ \ ] ^ { | } ~
2 A B C a b c
3 D E F d e f
4 G H I g h i
EN - 7
5 J K L j k l
6 M N O m n o
7 P Q R S p q r s
8 T U V t u v
9 W X Y Z w x y z
Alternatively, you can enter the numbers and letter using only the cursor buttons:
Go to previous entry space, entry can be overwritten
Go to next entry space, the last entry is saved
/ Select number / letter
OK conrm entire entry
It may take a few seconds to establish the connection to the network.
Once the connection is established, the main menu appears with the main menu items:
- Internet Radio: Access to worldwide radio stations
- Media Centre: Access to your UpnP devices via software with streaming capability.
- Information Center: Access to weather, financial and system information.
- Bluetooth: Access to all devices connected via bluetooth.
- Configuration: Various system settings
- Local Radio: Access to radio stations in a particular region(e.g. only German Stations)
• Press to enter standby mode. The time, date and any active alarm times display on the
screen.
EN - 8
• If you have setup a network connection, and use IR167BT again within the network, it will
automatically establish the connection. In case you desire to change the network, enter
configuration to setup the corresponding connection.
• Use the letter keys to input numbers/letters. Once you are on the letter you want,
press to the next entry. When you are at the end the input, press OK to confirm.
You may press to move to the previous entry.
4. AIRMUSIC CONTROL APP
The IR167BT can be controlled with your smartphone via WiFi. It is recommended to use
the AirMusic Control App. Additionally to controlling the radio, the app is able to play the
smartphone’s local music les on the IR167BT.
The app itself is available for Andriod and iOS. It can be downloaded from here:
EN
5. MAIN MENU
In the main menu you can select the following modes, Local Radio, My mediaU (if it is enabled,
see 5.9.2), Internet Radio, Media Center, FM, Information Center ,Bluetooth, and Conguration.
5.1 MY MEDIAU
Display and playback your own mediaU station list on the mediaU server.
Set your account rst.
When it is enabled, My mediaU will be shown on the main menu.
If various mediaU accounts exist in the IR167BT, select the default login account in here.
EN - 9
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.