Goclever TAB 7500 User Manual [ru]
TAB 7500
OWNER’S MANUAL
TAB 7500
INSTRUKCJA OBSŁUGI
WWW.GOCLEVER.COM
TO SEE MORE PRODUCTS TAB, NAVIO, DVR, DVB
Read this manual before installation and use.
VISIT OUR WEBSITE
-T
Spis treści
Contents /
English
Polski
Warunki gwarancji
Karta gwarancyjna
3
18
34
36
2
Table of Contents
Battery management and charging
Bottom bar of the Interface
The HOME Screen menu
Date and time settings
Wireless Connection
Applications install and uninstall
Frequently Asked Questions
Important Safety Precautions
English -
Basic Introduction
Quick Start
Boot and Shutdown
Connect with PC
Interface Introduction
Desktop
Basic Operation
Display settings
Browser
Video player
Photo Browser
Camera
Sound Recorder
Market
4
4
4
4
6
7
7
7
8
8
8
9
10
11
12
12
13
14
15
15
16
17
3
CPU: RockChip 2906 Cortex A8 1
LCD Screen:7 " 800 * 480 TFT LCD
.3M pixel camera
Operating System: Google Android 4.0
Network Connection: Built
Audio format: MP3,WMA,
Video format: max 1080p full HD
MOV,FLV, WMV,MKV)
Touch Panel: Capacitive Multi
Language: support multiple language
(OTG) ,
Battery management and charging
this device, please charge it fully. Put the charger adapter into the DC jack, the
This device adopts built
when it is charging, the icon of battery will be
when the charging finish, the battery icon will turn green and stop rolling.
If you do not use this device for a long time, please charge/release it once per month
to avoid deep discharge.
When it is power off because of low battery, connect to the charger, the device will
indicate “low power” or “charging”, please wait for a second until the machine can turn
to the main interface once the power is enough.
in polymer battery shoul
consuming is not included in the warranty.
Boot: Press and hold the power button, the system will enter the boot process System has
been started, entering the Android system:
WAV
AVI,3GP, MP4, MPG, RM, RMVB,
in polymer battery. Only the specified charger should be
d be charged regularly. The damage caused by
Basic Introduction
•
•
• Camera: Build-in 0
•
•
•
•
•
•
• Ports: mini USB
• Buttons: Power
Quick Start
Before using
device will start to charge.
Ghz
.3
-in 802.11b/g/n wireless
MP2, OGG, AAC, M4A, FLAC, APE,
video （
-touch
Earphone, microSD card slot
Tips
•
used.
•
•
•
•
• The built-
battery over-
Boot and Shutdown
-
rolling.
4
The system enters the default home interface.
: Press the power button, pop
up device options, select Power off, Click OK, you
Shutdown
can safely shut down.
-
5
By mini USB (OTG) interface of the device, you can connect with PC by
attached with the device. USB Data transferring is available. You can operate the files
through the PC. When your device is connected successfully, to pull up the notification area
of the status bar, can see the following icon
to enter the next
, then the device can transmission data with PC.
Note: The device also supports the FAT32 format for external devices, for example U disk,
Micro SD card to Transfer data.
mini USB cable
Connect with PC
Then click USB connected
Click Turn on USB storage
6
Introduction
A. WIFI signal status icon: If connected to the WIFI wireless network, the icon will be
B. OTG connect icon: If the device connected to the PC, will show the OTG connected icon.
C. Time display: Display the time
D. Battery status icon: Displays the current battery level and the charging status.
E. Menu, Home, Back, virtual buttons
Press the menu icon on the device, it will display a home screen menu
Wallpaper: Users can replace the wallpaper with you wishes.
Manage apps: It can quickly o
System Settings: Fast access to system settings, user can choose “Wireless & networks”,
for personalized settings.
of the current system, which has been set.
Interface
Bottom bar of the Interface
displayed
The HOME Screen menu
as
following:
pen a list of all applications.
“Display”, “Date & time” etc,
7
When sliding around with your finger to switch the main screen, the desktop fixed on the
main screen, will not move. User could drag the application icon placed on the desktop area
in the main applications area, you can open the system
Select the appropriate operation of the relevant items, such as: wireless and network,
Display, date and time settings, about Device,
Click "Date & time" to enter the Da
Select to set the date, select the time zone, set the time, time format, date format and other
For example, choose to set the date, as follows:
Desktop
in the main screen.
Basic Operation
Click the "Settings" icon
interface, as shown below.
setting
Date and time settings
information.
etc
te and time settings interface:
8
Select +: that the increase of 1 unit, Select
Also you can choose the number, enter the input mode. Directly entering the desired
number, then click “Done” to set the Date.
choose "Display" to enter the display settings interface, select
"Brightness", Pull the progress bar to adjust the brightness,
as below interface.
Display settings
In the settings interface
- : that the reduction of 1 unit.
9
Click Sleep, adjust the inactivity time of the device. You can press power key to activate the
hen display "Screen locked" interface, follow the prompts to unlock it.
Click the main menu "Settings" icon, go to "Settings" screen, click on "Wireless and
networks" into the "Wireless and networks settings" interface. Turn on
in the device will search AP lists automatic , click the searched AP can be
used, will pop up settings dialog, please follow the prompts to complete the WIFI network
links. Some encrypted network, need to en
Wi
d key. As shown below.
device. W
Wireless Connection
Fi module built-
ter a vali
-Fi switch, the Wi-
10
Applications install and uninstal
1. First you should select the Unknown sources which allow installation of non
2. Copy the APK installer software to Micro SD or NAND FLASH.
Installer to find the app directory, then Select applications to install. Users can
"Android market" online installation, or download via the computer, or online through the
in browser to download and install.
l
Install applications
-Market apps.
3. Click APK
machine built-
11
Loading...