Goclever Stand 01, Stand 02 Owner's Manual

Bluetooth Speaker
Stand 01
OWNER’S MANUAL
Bluetooth Speaker
Stand 01
INSTRUKCJA OBSŁUGI
ODWIEDŹ NASZĄ STRONĘ
WWW.GOCLEVER.COM
ABY ZAPOZNAĆ SIĘ Z INNYMI PRODUKTAMI TAB, NAVIO, DVR, DVB-T
Przed skorzystaniem z urządzenia zapoznaj się z niniejszą instrukcją obsługi
oraz zachowaj ją na przyszłość
2
Contents / Spis treści
English
3
Polski
10
Warunki gwarancji
18
3
Contents
Introduction
4
Battery Precautions
4
Getting Started
5
Installation
6
Cable Connections
7
Bluetooth Connection
7
LED Indicators
8
Battery Charging
8
Product Maintenance
9
Specifications
9
4
Introduction
Thank you for purchasing our Bluetooth speaker. This device can be easily connected with your audio source or video devices. It supports both Bluetooth and line-in usage.
Battery Precautions
The device can be powered by a built-in rechargeable lithium battery. Please charge the battery for at least 8 hours before your first use of the device.
* If the device is not used for a long period of time, The battery may be out of power.
Please charge the battery.
* Rechargeable batteries can only be charged under adult supervision.
* Use only the supplied USB cable to recharge the battery.
Improper charging may cause damage of the battery and device.
* Do not attempt to open the rechargeable battery or battery pack. There are no
serviceable parts inside.
* Should a battery leak, the device may become damaged. Clean the battery
compartment immediately, avoiding contact with your skin.
* Keep batteries out of reach of children. If swallowed, consult a physician immediately.
* Leaving the battery in hot or cold places. A device with a hot or cold battery may not
work Stably, even when the battery is fully charged.
Do not dispose batteries in fire as they may explode. Batteries may also explode if damaged. Please dispose them according to local regulations. Do not dispose them as household waste.
5
Getting Started
General controls
6
Installation
Clamp this speaker on your tablet, it’s scalable to fit the width of the tablet. You can also adjust the tablet angle refer the above pictures.
You can fold this speaker to fit in your bag, see above pictures.
7
Cable Connections
Bluetooth Connection
Switch “ON/OFF” button to “ON” to turn on the device, you will hear two long “dudu” sound after one beep sound. At this moment, the device is now in pairing mode and can be searched.1 .put the speaker in pairing mode when you turn on the Bluetooth, the speaker will be discovered by your device . When the speaker is in pairing mode the led will flash in green. 2.set your device to "discover" the speakers. Follow your device 's instruction guide, first make sure that Bluetooth is activated on your device . Then set your device to discover the speaker. This usually involves going to "setup", "connect" or" Bluetooth" menu on your device and selecting the option to "discover" or "add" a Bluetooth device. 3.your device will find the speaker under name "Bluetooth". Your device then asks if you want to pair with the speaker. Accept by pressing "yes" or "ok" on the device and confirm with the passkey or pin=0000(4 zeros). Your device will confirm when pairing is complete. In case of unsuccessful pairing, push to off then restart it to "on".
Loading...
+ 14 hidden pages