User guide US 1
Guide de l’utilisateur FR 5
Manual del usuario ES 10
Guia do utilizador PT 15
GN501-3_SC_NA 09/11/04 23:12 Side A
GN501-3_SC_NA 09/11/04 23:12 Side B
1
GN 501 SC
GN 503 SC
1
4
5
3
2
2
1
4
5
GN 501 SC/GN 503 SC user card
This user guide gives you information and instructions on setting up, using and maintaining
your GN 501 SC/GN 503 SC headsets.
1. Product information
The GN 501 SC/GN 503 SC headset soundcard lets you access voice driven applications,
such as speech recognition and recording, via your computer’s soundcard. The GN 501 SC/
GN 503 SC is the optimum interface for voice communications and streaming media over the
Internet/data networks.
Parts and Signatures
1. Headset
2. Speaker connector (orange)
3. Microphone connector(pink)
4. In-line volume control
5. In-line microphone mute switch
GN501-3_SC_NA 09/11/04 23:12 Side 1
2
2. Setting up
To set up your GN 501 SC/GN 503 SC, complete the following:
Plug the speaker connector (orange) into the speaker port of your computer.
Plug the microphone connector (pink) into the microphone port.
Adjust the headset’s boom so that it is pointed in the direction of your mouth.
3. Features and customization
Volume control
The in-line volume control lets you quickly adjust the volume from the speaker.
Mute functionality
The in-line mute functionality switches the transmission of your voice on/off.
4. Frequently asked questions
Why is there no sound output from the headset?
Increase the volume using the in-line volume control.
Adjust the audio source’s volume control (computer/soundcard/application control panel),
or adjust the output level on other audio playback devices.
Verify that the headset and all connectors are properly plugged into the correct ports.
Why is there no sound input from the microphone?
Ensure that the microphone isn’t in mute mode (the mute switch must be off).
Adjust the microphone volume settings of the target audio device (computer/soundcard/application control panel), or adjust the input level on other audio recording devices.
Verify that the headset and all connectors are properly plugged into the correct ports.
Cleaning, safety and maintenance
Clean the headset, including the headset boom arm, by wiping with a slightly damp cloth as
required. Dampen the cloth with only water and a little washing-up liquid if needed. Avoid
getting moisture into any button sockets or other openings.
GN501-3_SC_NA 09/11/04 23:12 Side 2
3
The plastic bags and wrapping parts are not toys for children. The bags themselves or the
many small parts they contain may cause choking if ingested.
Only authorized dealers or service centers may open the product. If any parts require replacement for any reason, including normal wear and tear or breakage, contact your dealer.
• Never try to dismantle the product yourself. None of the internal components can be
replaced or repaired by users.
• Avoid exposing the product to rain or other liquids.
Dispose of the product according to local standards and regulations.
5. Declaration and Warranty
Cautionary Notes to Computer Users:
When using any headset with a computer, care should
be taken in dry or low humidity environments to
protect the user from electrostatic discharge from the
monitor (CRT). Computer monitors can induce a substantial electrostatic charge when turned on or off, or
when there is a power failure, and the resulting
electrostatic discharge can be passed through the
headset to ground. A user in close proximity to or
touching the computer may feel a common “shock”
sensation, similar to touching a door knob after walking across a carpet, causing no harm to the user. This
discharge is entirely due to the computer monitor, the
headset is merely the shortest path to ground.
To minimize the possibility of electrostatic
discharge through the headset, you can:
• Use a grounded screen in front of the monitor.
• Use static dissipative wrist straps.
• Increase the relative humidity in the room to 60%
or more.
• Install static dissipative carpets or floor covering.
• Remove the headset before turning the computer
on or off.
GN Netcom products meet OSHA, FCC and CSA standards.
USA / Canada Warranty
Limited Warranty
GN Netcom warrants to the original consumer purchaser that, except for the limitations and exclusions
set forth below, the product shall be free from defects
in materials and workmanship for a period of one (1)
year from the date of original retail purchase (“Warranty Period”). The obligation of GN Netcom under this
warranty shall be limited to repair or replacement, at
GN Netcom option, without charge, of any part or unit
that proves to be defective in material or workmanship
during the Warranty Period, provided the product is returned to GN Netcom at the address listed under “How
to Obtain Warranty Repairs.” Except as modified by applicable State Law, this warranty sets forth the extent
and limit of GN Netcom obligation to the purchaser
and or user of the product.
Exclusions from Warranty
This warranty applies only to defective factory material
and factory workmanship. Any conditions caused by
accident, abuse, misuse or improper operation in
violation of instructions furnished by GN Netcom
destruction or alteration, improper electrical voltages
or currents, or repair or maintenance attempted by
anyone other than GN Netcom is not a “defect”
GN501-3_SC_NA 09/11/04 23:12 Side 3
4
covered by this Warranty. In such cases, GN Netcom
may charge you for materials and labor, even during
the Warranty Period. It is the owner’s responsibility to
operate and care for this product in accordance with
the operating instructions and specifications supplied
with the product; and repairs resulting from failure to
do so are not covered by the Warranty.
The Warranty is void if the serial number, date code
label, or product label is removed.
The following parts are considered to be subject to
wear and tear in normal usage and are not covered by
the Warranty: earhooks, decorative finishes and all
foam products (earpads, eargels, microphone covers).
Implied Warranty
Under state law, you may be entitled to the benefit of
certain implied warranties. These implied Warranties
will continue in force only during the Warranty Period.
Some states do not allow limitations on how long an
implied warranty lasts, so the above limitation may not
apply to you.
Incidental or Consequential Damages
Neither GN Netcom nor your retail dealer or selling distributor has any responsibility for any incident or consequential damages including, without limitation, commercial loss, or for any incidental expenses, loss of
time, or inconvenience. Some states do not allow the
exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not
apply to you.
Other Legal Rights
This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state.
How to Obtain Warranty Repairs
For customer service and technical support, call
GN Netcom at
1-800-826-4656 or 1-603-598-1100.
To obtain Warranty repairs, return your unit, shipping
prepaid, direct to:
In USA:
GN Netcom
77 Northeastern Blvd.
Nashua, NH 03062 USA
In Canada:
GN Netcom
1515 Matheson Blvd., Unit 104
Mississauga, Ontario L4W 2P5
Please use the original container, if possible, or pack
the unit in a sturdy carton with sufficient packing material to prevent shipping damage. Include the following information:
1. Your name, company name, address and telephone
number.
2. A description of the problem.
3. A copy of your purchase receipt indicating the
model number and date of purchase. Without proofof-purchase, your warranty is defined as beginning on
the date of manufacture as labeled on the product.
For out-of-warranty products, also include:
1. A purchase order authorizing repair.
During the Warranty Period, shipping charges for return
to you will be paid by GN Netcom for a unit requiring
any repair covered by the Warranty. Return shipping
will be charged to the customer during the Warranty
Period for a unit requiring no Warranty repair. These
shipping charges will be prepaid by GN Netcom and
billed to the customer.
Damage occurring during shipment is deemed the responsibility of the carrier, and any claim should be
made directly to such carrier.
GN501-3_SC_NA 09/11/04 23:12 Side 4
5
GN 501 SC/GN 503 SC – Carte de l'utilisateur
Ce guide de l'utilisateur vous explique comment installer, utiliser et entretenir votre microcasque GN 501 SC/GN 503 SC.
1. Présentation du produit
Le micro-casque GN 501 SC/GN 503 SC est équipé d'une carte son qui vous permet d'utiliser des applications à commande vocale telles que la reconnaissance vocale et l'enregistrement par l'intermédiaire de la carte son de votre ordinateur. Le GN 501 SC/GN 503 SC est
une interface optimale pour la communication vocale et la diffusion multimédia en temps
réel sur Internet/les réseaux de transmission de données.
Composants et signatures
1. Micro-casque
2. Connecteur haut-parleur (orange)
3. Connecteur micro (rose)
GN 501 SC
GN 503 SC
1
4
5
3
2
2
1
4
5
4. Commande de volume directe
5. Touche "secret" du micro
GN501-3_SC_NA 09/11/04 23:12 Side 5