GME SS002B, SS002Y, SS002R, Sound Safe Plus SS002B, Sound Safe Plus SS002Y Installation And User Manual

SOUND SAFE INSTRUCTION MANUAL PAGE 1

InstallatIon and user guIde

IntroductIon

Congratulations on your purchase of the GME Sound Safe Plus.

The Sound Safe Plus is a water and dust proof* protective
case with an inbuilt speaker and 3.5 mm audio
plug for your smartphone or audio device.

The Sound Safe Plus features a smartphone
interconnect dongle that allows the user to answer
and hang-up a phone call, and to pause, fast forward
and rewind a song (on qualifying devices) without
opening the protective case.

The case will hold your audio device, smartphone, keys
or other small items you want to keep safe from the
elements.

Fcc complIance statement
and Important InFormatIon

This device complies with ‘Class B digital device’ specifications, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. The device generates, uses and can radiate radio frequency energy
and if not installed and used in accordance with the instructions may cause harmful interference
to radio communications. There is no guarantee that interference will not occur in a particular
installation; if this device causes interference to radio or television reception try one of the
following measures:

> Reorientate or relocate the receiving antenna.

> Increase distance between the device and receiver.

> Connect the device to an outlet on a circuit different to the one that

the receiver is connected to.

> Consult a dealer or experienced radio/TV technician for assistance.

Waterproof speaker case (model: SS002B/SS002Y/SS002R).

SMARTPHONE INTERCONNECT
DONGLE

PHONE INTERFACE /
HEADSET SOCKET

PAGE 2 INSTRUCTION MANUAL SOUND SAFE

DUST FILTER

POWER LED

LATCHES TO OPEN

ON/OFF VOLUME

Fig. 1

controls

1. Power / volume knob: To optimise your speaker’s sound, set your audio device’s volume
– (MP3 player, iPod®, iPhone® or smartphone) to between the 70-80% levels. Rotate the
Sound Safe Plus’s volume knob to the right to increase volume. To turn the Sound Safe off,
turn the knob to the left until a ‘click’ is heard and the LED above the volume knob turns off.

2. Power LED: The LED above the volume knob illuminates when the unit is ‘on’ indicating that
the batteries are in use, even if you do not hear any sound from the speaker. To optimise the
lifespan of the batteries, turn the Sound Safe ‘off’ when not listening to music.

InstallIng tHe BatterIes

1. Open the unit by pressing down on the release buttons and swinging the safety latches
open as shown in Fig.2.

2. Locate the release button on the battery cover as
shown in Fig.3 and press inwards and upwards
to release.

3. Insert 3 x AA batteries into the battery compartment
ensuring the correct orientation as marked.

4. Replace the battery cover by locating the lugs and
swinging to close until it ‘clicks’.

IMPORTANT: Use new or fully charged quality batteries. Poor quality batteries may result
in audio distortion or hum from the speaker.

Fig. 2

SOUND SAFE INSTRUCTION MANUAL PAGE 3

lIstenIng to your musIc

Before connecting your audio device, set the SELECTOR switch to suit your device. The SELECTOR
switch allows the Sound Safe Plus to work optimally with either of the two main classes of
smartphone or audio devices. Select ‘I’ for iPhone and iPod, Samsung Galaxy S3 and Galaxy Note
2, HTC, Motorola, BlackBerry, LG and Palm devices. Select ‘S’ for Samsung Galaxy S, Sony Ericsson
or Nokia devices.

1. Plug the Sound Safe Plus audio plug into the headset socket of
your audio device (MP3 player, iPod

®

, iPhone® or smartphone).

2. Turn the volume on your audio device up to a normal
listening level and select ‘play’.

NOTE: The best sound is created by turning the volume up to about the 70 – 80% level. If the
volume on your audio device is too low the volume level from the Sound Safe may also be too
low. If the volume level on your audio source is at 100%, the sound may be distorted at high
volume levels.

3. Turn the volume on the Sound Safe Plus to the desired listening level either through the
speaker or through a headset.

operatIng tHe smartpHone Interconnect dongle

Before use, ensure the SELECTOR switch
on the smartphone interconnect dongle is
set to ‘I’ or ‘S’ to suit your smartphone. It
should also match the SELECTOR switch
setting in the Sound Safe Plus unit. If you
find that the smartphone interconnect
dongle is not working normally with your
phone, slide the SELECTOR switch to
another mode and try again.

• Select‘I’foriPhoneandiPod,Samsung

Galaxy S3 and Galaxy Note 2, HTC,
Motorola, BlackBerry, LG and Palm
devices.

• Select‘S’forSamsungGalaxyS,SonyEricssonorNokiadevices.

Selector

I S

MODE SWITCH

MIC

PLAY PAUSE
BUTTON

3.5 MM
PLUG

Selector

BATTERY
COMPARTMENT

BATTERY COVER
RELEASE BUTTON

PRESS INWARDS AND
UPWARDS TO RELEASE

Fig. 3

SELECTOR