Global Industrial 954852 User Manual

Instruction Manual

HEX300 HEX500

Note: Owner/Operator must read and understand this instruction

manual before using the table.

Lift Table HEX Series

HEX300, HEX500

Operation and Service Manual

BEFORE OPERATING THE LIFT TABLE, READ THIS MANUAL CAREFULLY AND UNDERSTAND

COMPLETELY. KEEP THIS MANUAL ON FILE FOR FUTURE REFERENCE.IF THIS IS LOST,

PLEASE

CONTACT YOURLOCAL SUPPLIER FOR A NEW COPY. ALSO, IF THE WARNING/CAUTION

DECAL ON

THE UNIT IS LOST, PLEASE CONTACT YOUR LOCAL SUPPLIER FOR A NEW DECAL.

NOTE: On this manual, WARNING means the danger which can lead to death or serious injury.

CAUTION means the danger which can lead to slight injury or property damage.

1. WARNINGS

1.DO NOT put foot or hand in scissors mechanism.

2.DO NOT allow other person to stand in front of behind lift table when it is moving.

3.DO NOT move lift table when table is in raised position. Load could fall down.

4.DO NOT enter under table.

5.DO NOT overload lift table.

6.DO NOT put foot in front of rolling wheels. Injury could result.

7.WATCH difference of floor level when moving lift table. Load could fall down.

8.DO NOT use lift table on slope or inclined surface, lift table may become uncontrolable and

create danger.

9.DO NOT lift people. People could fall down and suffer severe injury.

2.CAUTIONS

1.Read this operation manual carefully and understand completely operating lift table. Improper

operation could create danger.

2.This lift table is a movable lifter designed to lift or lower rated load on table. DO NOT use lift table

for other purpose than its intended use.

3.DO NOT allow person to operate lift table who dose not understand its operation.

4.DO NOT lower table too fast. Load could fall down and create danger.

5.KEEP watching the condition of load. Stop operating lift table if load becomes unstable.

6.DO NOT side or end load. Load must be distributed on at least 80% of table area.

7.DO NOT use lift table with unstable, unbalanced loosely stacked load.

8.Practice maintenance work according to service instructions.

9.DO NOT modify lift table without manufacturer’s written consent.

10.REMOVE load from table and use safety stopper to prevent table from lowering when servicing

lift table.

11.This lift table is not designed to be water resistant .Use lift table under dry condition.

3. HEX300
HEX500

1. Table 2. Handle

3. Scissors Lever Assembly 4. Discharge Valve Lever Assembly

5. Control Lever 6. Pedal Bent Pipe

7. Chassis 8. Lifting Crank

9. Two-way braking wheels 10. Hydraulic System

11. Front Wheels 12. Connecting Lever Assembly

13. Safety Rod

4.DAILY INSPECTION

Daily inspection is effective to find the malfunction or fault on lift table. Check lift table on the

following points before operation.

CAUTION: DO NOT use lift table if any malfunction or fault is found.

(1)Check for scratch, bending or cracking on the lift table.

(2)Check if there is any oil leakage from the cylinder.

(3)Check the vertical creep of the table.

(4)Check the smooth movement of the wheels.

(5)Check the function of brake.

(6)Check if all the bolts and nuts are tightened firmly.

5. OPERATING LIFT TABLE

5.1 How to use the brake.

CAUTION: Brake lift table when not moving it in order to prevent sudden movement.

The brake is equipped with the swivel caster on the right side.

(1) Braking the wheel, press the brake pedal.

(2) Releasing the brake, lift up the brake pedal.