Genius VideoCAM NB300 User Manual

English

Important Notice:

Please install the driver first and then connect VideoCAM NB 300 to the USB port.

Please read the important notice before the installation.

1.Installing VideoCAM NB 300 software

A.Insert the VideoCAM NB 300 software CD into CD-ROM drive.

B.After few seconds, the setup screen will show the picture of VideoCAM NB 300. Click the “Utility Driver” then simply follow the on-screen instructions.

C.Please remember to install DirectX of the CD-ROM.

Notice:

If the setup screen doesn’t show the picture of VideoCAM NB 300, please proceed the following installation:

z Go to the taskbar and click Start then Execute. z Type D \SETUP.EXE , then click Enter

key.

(Suppose your CD-ROM is in Drive D)

2. Connect the VideoCAM NB 300 to your computer.

	Connect the VideoCAM NB 300 to the USB port as	USB Port
	shown on the right drawing.

3.To get rid of driver installation, please go to the taskbar and follow “Start Æ Program Æ VideoCAM NB 300 Æ

VideoCAM NB 300 Uninstall, then follow the on-screen instruction to remove the installation.

4.You can install the recognize software for video conferencing or chat with your friends.

1

English

You can use snapshot button to capture still image or rotate the lens cover to adjust the focus.

5. Function description for the major icon

A.Play the .avi file.

B. Preview the video image.

C. Capture image with full motion video.

D.Take a picture.

E. Send photo through e-mail.

2