Genius VIDEOCAM EYE User Manual
English
VideoCAM Eye Features
1 SnapShot Button
2 LED Indicator
3 Lens
4 Swivel Base
Installing the VideoCAM Eye
1. Please install the driver first and then connect VideoCAM
Eye to the USB port.
2. Installing the VideoCAM Eye driver
Windows Environment
a. Insert the VideoCAM Eye Installation CD into the CD-ROM drive.
b. The Autorun screen will bring up the installation screen. Click on
“Driver” then simply follow the on-screen instructions.
c. Install DirectX from the CD.
Notice: If the Autorun screen doesn’t start, please follow these
steps:
z Click on “Start Menu”
z Type D：\SETUP.EXE , then click Enter key.
(Assume your CD-ROM is in Drive D)
Mac Environment
a. Insert the VideoCAM Eye Installation CD into the CD-ROM
drive.
-1-
English
b. Double click on the CD-ROM drive
c. Click on the file folder of “VideoCAm Eye Driver OSX 1.0”
d. Click on “VideoCAM Eye Driver Install” then simply follow
the on-screen instructions.
3. Insert the VideoCAM Eye’s USB cable to your desktop’s or
laptop’s USB port.
4. Complete software and hardware installation. You can
install the software you would like to use for video
conferencing or chat with your friends.
NOTE
To remove the driver installation:
Windows Environment
Please go to the taskbar and follow “Start Æ Program Æ VideoCAM Eye
Æ Click “Uninstall”, then follow the on-screen instructions to remove the
driver.
Mac OSX Environment:
Please put the VideoCAM Eye installation CD into CD-ROM drive Æ go to
the file folder of “VideoCAM Eye Driver OSX 1.0” Æ Click on “VideoCAM
Eye Uninstall” Æ Follow the on-screen instructions to remove the driver.
:
-2-
English
Genius Application (Windows Only)
You can use our software to capture the real-time image, record or
execute the simply security function.
To run the software, please go to the taskbar and follow “Start”Æ Click
“Program”Æ Choose “VideoCAM Eye”Æ Click “VideoCAM Eye. Or
you may execute the software by simply clicking the shortcut of
“VideoCAM Eye”
NOTE
After installing the driver of VideoCAM Eye, the system will automatically
create a file (C:\WINDOWS\Album or C:\WINNT\Album)to save the images
you take using the Genius Application.
1. Description for the major icon
Preview mode
Snapshot mode
Video Clip Mode
Security monitoring system
Exit the Genius VideoCAM Series UI
-3-
English
Camera Control
NOTE
In the camera control section, you can personalize your camera
settings for different circumstances.
Camera Control:
You can set different values for
different circumstances and
environment
-Press “Default” to return to
the manufacturer’s settings.
Video Proc Amp:
In the section, you can adjust
different values toward image
itself.
-Press “Default” to return to
the manufacturer’s settings.
-4-
English
Advanced setting:
Select the correct frequency
according to the country where
you are using the web camera.
Also, you can have different
compression choices for your
images.
-Press “Default” to return to
the manufacturer’s settings.
2. Preview Mode
You can use the function buttons on the control panel to zoom in/out and
move upward/downward/left/right.
-5-
English
Zoom in the image
Zoom Out the image
Move the image upward
Move the image downward
Move the image to the left
Move the image to the right
Resolution Selection
There are 2 categories of resolution:
I420. You can select 5 different image resolutions for
each of them. The file size of I420 will be smaller than
RGB24. So, I420 may be the better choice for
transmission.
RGB24 and
3. SnapShot Mode
You can press the Snapshot button in the right of the circle to take a
picture right away and share with your friends.
-6-
Loading...