Genius VeriFone MX915 Quick Start Manual

Quick Start Guide

VeriFone MX915 + Motorola QR Reader

What you will need

Your package should arrive with one box containing the MX915 and, if selected, a second box containing the DS9208. A
network ethernet cable will also be provided. Other optional power cables and networking cables may be required for your
unique installation along with wired internet access such as a router (not provided).

1. Utility Cable

1. 2. 3.

2. Genius CED (VeriFone MX915)

3. AC Adapter (for VeriFone MX915)

HOST

Connecting Genius

The utility cable handles the wiring for Genius CED. Once
this cable is connected in to Genius, no other cables connect
to Genius. Rather, everything is connected to the utility cable.
Get this cable now to begin installation.

+12V Audio USB

Ethernet

QZ ABC DEF

2 3

1

GHI JKL MNO

5 6

4

PRS TUV WXY

7

809

The utility cable has four open slots for other cables to
connect to it, as illustrated.

+12V Audio USB

HOST

Ethernet

Running the Utility Cable

First, establish the path the utility cable will follow at your point of sale. Place the Genius CED on the countertop in the location
you desire, ensuring the CED is in a position facing the customers of this POS station. The Utility cable will already be connected
to the CED via the removable communications module. Typically the cable will be placed below and behind the countertop while
the CED is on top of the counter facing the customer. Please note the hob on the utility cable must be in close proximity to both
a power outlet and an open network slot. Once you are satisfied with this arrangement, it is time to begin connecting Genius. If
you need to remove the cable in order to run it through a countertop follow the instructions below.

Removing the Communications Module

Place Genius on the countertop and turn it over so the
bottom is facing up. Press the two flexible tabs and push
up until the communications module slides out.

With the module in hand apply pressure to the metallic
plate covering the green cable connection and slide it off
of the module. Gently lift the cable from the housing.

Once removed run the cable through your countertop
accordingly. When the cable is run, place the green end
back into the housing in the communications module and
fit the metallic plate on top. Re-insert the module into the
CED, making sure it clicks in place once fully attached.

The Utility Cable

The utility cable provides power to Genius. Therefore,
power must be supplied to the utility cable. With the utility
cable properly run to an area below or behind the counter­top, locate an available power source.

With the power cable in hand, gently but firmly insert
the +12V end in to the labeled slot on the utility cable
as shown in the illustration. Then, insert the power cable
into the available power outlet.

+12V Audio USB

Ethernet

HOST