General AOH18LMAK2, 2008, AOH24LMAM2 Technical Manual

R410A
D2D_MU021E/02
2008.05.13
1. MULTI TYPE : 2ROOM TYPE
INDOOR UNIT
(DC FAN MOTOR TYPE)
AS A07LACM AS A09LACM AS A12LACM AS A14LACM AS A18LACM
AU F09LAL AU F12LAL AU F14LAL
AG F09LAC AG F12LAC AG F14LAC
AU F18LAL
AB F14LAT AB F18LAT
- (01 - 01) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
1. FEATURE
INDOOR UNIT (DC fan motor)
AU F09LAL AU F12LAL AU F14LAL AU F18LAL
AO 18LMAK2 / AO 24LMAM2
OUTDOOR UNIT
Cassette Type (Compact)
Wall Mounted Type
AS A07LACM AS A09LACM AS A12LACM AS A14LACM AS A18LACM
1-1. MODEL
AG F09LAC AG F12LAC AG F14LAC
Floor Type
Duct TypeDuct Type (Small)
Universal Type
AR F12LALU AR F14LALU AR F18LALU
AB F14LAT AB F18LAT
AR F09LALU
AR F18L, AU F18L, AB F18L and AS A18L cannot connect to AO 18L2.
- (01 - 02) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
INDOOR UNIT CONNECTION PATTERN
CONNECTION
PATTERN
No.1
Indoor unit
No.2
Indoor unit
CONNECTION
PATTERN
No.1
Indoor unit
No.2
Indoor unit
MODEL : AO18L2
MODEL : AO24L2
1 7,000 7,000
2 7,000 9,000
3 7,000 12,000
4 7,000 14,000
5 9,000 9,000
6 9,000 12,000
7 9,000 14,000
8 12,000 12,000
1 7,000 7,000
2 7,000 9,000
3 7,000 12,000
4 7,000 14,000
5 7,000 18,000
6 9,000 9,000
7 9,000 12,000
8 9,000 14,000
9 9,000 18,000
10 12,000 12,000
11 12,000 14,000
12 12,000 18,000
13 14,000 14,000
- (01 - 03) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
1-2-1. INDOOR UNIT
MODEL : AU F09L, AU F12L, AU F14L, AU F18L
1-2. SELECT FUNCTION
When the air conditioner power was temporarily turned off by a power failure etc. It restarts automatically after the power recovers. (Operated by setting before the power failure.)
Auto restart
1-2-2. OUTDOOR UNIT
MODEL :AO 18L2, AO 24L2
When the current contacted is insufficient, you can change the current capacity.
Current capacity setting
The Remote control unit signal code can be changed by four patterns.
Remote control unit signal code setting
MODEL : AR F09L, AR F12L, AR F14L, AR F18L
When the air conditioner power was temporarily turned off by a power failure etc. It restarts automatically after the power recovers. (Operated by setting before the power failure.)
Auto restart
In case of installing in high static, you can maximize(minimize) air flow and noise.
High static pressure function setting
MODEL : AB F14L, AB F18L
When the air conditioner power was temporarily turned off by a power failure etc. It restarts automatically after the power recovers. (Operated by setting before the power failure.)
Auto restart
The Remote control unit signal code can be changed by four patterns.
Remote control unit signal code setting
You can control sub fan by synchronization with fan operation of indoor unit.
Fresh air output
MODEL : AS A07L, AS A09L, AS A12L, AS A14L, AS A18L
When the air conditioner power was temporarily turned off by a power failure etc. It restarts automatically after the power recovers. (Operated by setting before the power failure.)
Auto restart
The Remote control unit signal code can be changed by four patterns.
Remote control unit signal code setting
MODEL : AG F09L, AG F12L, AG F14L
When the air conditioner power was temporarily turned off by a power failure etc. It restarts automatically after the power recovers. (Operated by setting before the power failure.)
Auto restart
The Remote control unit signal code can be changed by four patterns.
Remote control unit signal code setting
Operates in the 10°C heating mode so that the room does not become too coid even when you are absent during the winter,etc.
10°C heating operation
- (01 - 04) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
High performance and compact size
Built-in timers
Easy-to-understand operation Simple installation
FEATURES
Equipped with weekly timer as standard function. (2 times Start / Stop per day for a week)
When a failure occurs,the error code is displayed. (Maximum of 16)
Various timer setup (ON / OFF / WEEKLY) are possible.
Economy operation are possible.
Easy installation with a slim shape with no bulge in the back.
When setting up a timer, operation mode and a temperature setup can be changed.
Error indication.(A maximum of 16 error histories are memorizable.)
Up to 16 indoor units can be simultaneously controlled.
The room temperature can be controlled by being detected the temperature accurately with built-in thermo sensor.
Wired
remote
controller
Weekly
timer
Setback
timer
Three functions are combined in one unit.
Simple function setting
Setting of the air conditioner selection function is performed by remote controller.
0 3 6 9 12 15 18 21 Time
24°C
0 3 6 9 12 15 18 21 Time
28°C
SUMOTUWETH FR SA
7
3126 9
15 18 21
Easy-to-understand time bar display
Setup screen example (Set to Wednesday: 8:00 to 20:00.)
Screen after setup
SUMOTUWETH FR SA
7
3126 9
15 18 21
Setup screen example (Set from Sunday to Saturday: 12:00 to 15:00, 28 °C.)
SUMOTUWETH FR SA
3126 9
15 18 21
Setback timerWeekly timer
At "Weekly timer" + "Set back timer" setup
Possible to set ON/OFF time to operate twice each day of the week.
Possible to set temperature for two time spans and for each day of the week.
24°C
0 3 6 9 12 15 18 21 Time
28°C
24°C 28°C 24°C
Timer area
Operation area
Components are compatible with standard switch boxes. Flat back construction allows equipment to be installed wherever it is needed.
[
Variable timer control
]
The operation/display sections are zoned accord­ing to time and operation, enabling variable pro­gramming to match application.
European switch box
JIS box
2. REMOTE CONTROLLER
2-1. WIRED REMOTE CONTROLLER (For DUCT TYPE)
- (01 - 05) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
Display panel
DIMENSION
SPECIFICATION
120
17
[ Unit : mm ]
SIZE (H x W x D mm) 120 x 120 x 17
WEIGHT ( g ) 160
CABLE LENGTH ( m )
POWER ( V )
10
12
15
11
10
9
8
2
1 3
5
14
4
12
13
6 7
17
16
18
19
20
21
120
Front View
FUNCTIONS
Defrost display
Thermo sensor display
Economy display
Vertical swing display*
Horizontal swing display*
Filter display*
1
START/STOP button
Pressed to start and stop operation.
13
Horizontal airflow direction and swing button*
Push for two seconds to change the swing mode.
5
Economy button
Turns the economy efficient mode on and off.
8
Set back button
Pressed to select the set back timer.
14
Filter button*
12
Vertical airflow direction and swing button*
Push for two seconds to change the swing mode.
9
Set time button
Pressed to set time.
17
Operation mode display
7
Day (DAY OFF) button
Temporarily cancels of one day timer.
6
Timer mode (CLOCK ADJUST) button
Selects the timer mode (OFF TIMER, ON TIMER, WEEKLY TIMER). Set the current time.
10
Delete button
The schedule of a weekly timer is deleted.
Master control button
Selects the operating mode(AUTO, HEAT, FAN, COOL, DRY).
3
4
Fan control button
Selects the fan speed (AUTO, QUIET, LOW, MED, HIGH).
18
Fan speed display
16
Timer and clock display
Operation lamp
Lights during operation and when the timer is on.
15
20
Temperature display
21
Function display
19
Operation lock display
Set temperature button
Selects the setting temperature.
2
11
Set button
Sets the date, hour, minute and on-off time.
*These functions are not available.
- (01 - 06) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
Setting of the air conditioner selection function is performed by remote controller.
Simple function setting
FEATURES
Cooling operation/dry operation
60min.
1 °C
2 °C
When the sleep timer is set, the set temperature automatically rises 1 °C every hour. The set temperature can rise up to a maximum of 2 °C.
Heating operation
When the sleep timer is set, the set temperature automatically drops 1 °C every 30 minutes. The set temperature can drop to a maximum of 4 °C.
1 °C
30min.
60min.
90min.
2 °C
3 °C
4 °C
Timer setting
Timer setting
• Code selector switch eliminates unit being wrongly switched. (Up to 4 codes can be set.)
A B C D
A B
C
D
Mixed-up
After code change
•Wide and precise transmitting range.
A B C D
1. Press the MODE button for more than five seconds to start the code change.
3. Press the MODE button again to end the code change.
2. Press the or button to select the desired code.
Four kinds of timer setup (ON / OFF / PROGRAM / SLEEP) are possible.
Easy to change transmission code (4 patterns) by button operation.
Four kinds of timers. Easy operation.
Select from four different timer programs (On/Off/Program/Sleep).
Built-in timers
The program timer operates the ON and OFF timer once within a 24 hour period.
Program timer
The sleep timer function automatically corrects the temperature thermostat setting according to the time setting to prevent excessive cooling and heating while sleeping.
Sleep timer
Simultaneously operation
1 2
2-2. WIRELESS REMOTE CONTROLLER
- (01 - 07) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
Display panel
2
4
9
3
1
16
15
5
17
18
19
21
24
23
22
25
10
FUNCTIONS (FOR CASSETTE TYPE)
SPECIFICATION
SIZE (H x W x D mm) 170 x 56 x 19
WEIGHT ( g ) 85 (w/o batteries)
ACCESSORY Holder
1
MODE button
Selects the operating mode (AUTO, HEAT, FAN, COOL, DRY). /Start / end R.C. custom code change. (Max 4 types)
4
Filter reset button
5
Sleep button
Pressed to select sleep timer.
6
Fan button
Selects the fan speed (AUTO, QUIET, LOW, MED, HIGH).
7
START/STOP button
Pressed to start and stop operation.
8
Set button (Vertical)
Air flow direction vertical set button.
9
Set button (Horizontal)*
Air flow direction horizontal set button.
18
Economy display
20
Sleep display
21
Transmit indicator
22
Fan speed display
23
Swing display
24
Timer mode display
25
Clock display
Operating mode display
19
17
Temperature set display
2
Economy button
3
Set temp. button ( / )
Set remote controller custom code buttons
Sets the indoor temp./ Sets R.C. custom code.
Swing button
Air flow direction swing button.
10
12
Timer set ( / ) button
Sets the current time and on-off time.
11
Timer mode button
Pressed to select the timer mode. (OFF TIMER, ON TIMER, PROGRAM TIMER, TIMER RESET)
Test run button
Used when testing the air conditioner after installation.
15
Signal transmitter
16
14
Reset button
Used when replacing batteries.
13
Clock adjust button
Sets the current time.
13
11
12
14
8
7
6
20
* These functions are not available.
- (01 - 08) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
Display panel
2
4
9
3
1
16
15
5
17
18
19
21
24
23
22
25
10
FUNCTIONS (FOR UNIVERSAL TYPE)
SPECIFICATION
SIZE (H x W x D mm) 170 x 56 x 19
WEIGHT ( g ) 85 (w/o batteries)
ACCESSORY Holder
1
MODE button
Selects the operating mode (AUTO, HEAT, FAN, COOL, DRY). /Start / end R.C. custom code change. (Max 4 types)
4
Filter reset button
5
Sleep button
Pressed to select sleep timer.
6
Fan button
Selects the fan speed (AUTO, QUIET, LOW, MED, HIGH).
7
START/STOP button
Pressed to start and stop operation.
8
Set button (Vertical)
Air flow direction vertical set button.
9
Set button (Horizontal)
Air flow direction horizontal set button.
18
Economy display
20
Sleep display
21
Transmit indicator
22
Fan speed display
23
Swing display
24
Timer mode display
25
Clock display
Operating mode display
19
17
Temperature set display
2
Economy button
3
Set temp. button ( / )
Set remote controller custom code buttons
Sets the indoor temp./ Sets R.C. custom code.
Swing button
Air flow direction swing button.
10
12
Timer set ( / ) button
Sets the current time and on-off time.
11
Timer mode button
Pressed to select the timer mode. (OFF TIMER, ON TIMER, PROGRAM TIMER, TIMER RESET)
Test run button
Used when testing the air conditioner after installation.
15
Signal transmitter
16
14
Reset button
Used when replacing batteries.
13
Clock adjust button
Sets the current time.
13
11
12
14
8
7
6
20
- (01 - 09) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
SPECIFICATION
SIZE (H×W×D mm)
WEIGHT
ACCESSORY Holder
(g)
170 × 56 × 19
85
(w/o batteries)
Display panel
MASTER CONTROL button
CLOCK ADJUST button
TIMER MODE button
FAN CONTROL button
START/STOP button
AIR FLOW DIRECTION Vertical SET button
AIR FLOW DIRECTION Vertical SWING button
RESET button
SET TIME button(+/-)
Remote Control Unit Display
Operating Mode Display
Clock Display
Timer Mode Display
Fan Speed Display
Temperature Set Display
SWING Display
SLEEP Display
COIL DRY Display
Transmit Indicator
SET TEMP. buttons( / )
Signal Transmitter
TEST RUN button
SLEEP button
COIL DRY button
FUNCTIONS (FOR WALL MOUNTED TYPE)
1
1
4
10
12
13
2
7
8
9
14
11
15
18
24
23
22
16
21
20
19
17
3
5
6
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Perform a test run only when installing the air conditioner .If the signal to perform a test run is received during normal operation, the air conditioner's thermostat will malfunction.
If the signal to perform a test run is received during normal operation, the unit will switch to the test operation mode and the indoor unit's OPERATION and TIMER indicator lamps will flash simultaneously.
To stop the test operation mode, press the START/STOP button to stop the air conditioner.
- (01 - 10) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
Display panel
FUNCTIONS (FOR FLOOR TYPE)
SPECIFICATION
12
10
11
9
6
13
14
8
15
7
1
5
4
3
2
16
17
20
21
25
26
18
24
23
27
22
19
SLEEP button
MODE button
10°C HEAT button
SET TEMP. button (
/ )
COIL DRY button
Signal Transmitter
TIMER MODE button
TIMER SET (
/ ) button
FAN CONTROL button
ECONOMY button
START/STOP button
SET button
SWING button
RESET button
TEST RUN button
This button is used when installing the conditioner, and should not be used un­der normal conditions, as it will cause the air conditioner’s thermostat function to op­erate incorrectly. If this button is pressed during normal op­eration, the unit will switch to test opera­tion mode, and the Indoor Unit’s OPERA­TION Indicator Lamp and TIMER Indicator Lamp will begin to flash simultaneously. To stop the test operation mode, press the START/STOP button to stop the air condi­tioner.
CLOCK ADJUST button
Remote Control Unit Display
Transmit Indicator
Clock Display
ECONOMY Display
Operating Mode Display
Timer Mode Display
Fan Speed Display
Temperature SET Display
COIL DRY Display
SLEEP Display
SWING Display
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
18
17
16
19
20
21
22
23
24
25
26
27
SIZE (H x W x D mm) 170 x 56 x 19
WEIGHT ( g ) 85 (w/o batteries)
ACCESSORY Holder
- (01 - 11) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
3-1. DUCT TYPE
3. SPECIFICATIONS
Note : Specifications are based on the following conditions. Cooling : Indoor temperature of 27 °CDB / 19 °CWB.and outdoor temperature of 35 °CDB/24 °CWB. Heating : Indoor temperature of 20 °CDB / 15 °CWB.and outdoor temperature of 7 °CDB/6 °CWB. Standard static pressure : 0pa Pipe length : 7.5 m, Height difference : 0 m.(Outdoor unit - Indoor unit) Sound pressure level : Install a 2m duct to the outlet port and a 1m duct to the suction port and measure.
ARF09LALU ARF12LALU ARF14LALU ARF18LALU
kW 2.7 3.5 4.2 5.2
BTU/h 9200 11900 14300 17800
kW 1.5-3.2 1.5-3.9 1.5-4.8 1.8-6.1
BTU/h 5100-10900 5100-13300 5100-16400 6100-20800
kW 3.3 3.8 4.8 6.0
BTU/h 11300 13000 16400 20500
kW 1.5-4.1 1.5-4.8 1.5-5.8 1.6-7.1
BTU/h 5100-14000 5100-16400 5100-19800 5500-24200
l/h (pints/h) 1.0(2.1) 1.2(2.5) 1.5(3.2) 1.7(3.6)
High 480 630 820 850
Med 440 560 720 750
Low 400 480 620 640
Quiet 360 430 480 500
High 480 630 820 850
Med 440 560 720 750
Low 400 480 620 640
Quiet 360 430 480 500
Type × Q'ty Siroccox1
Motor output W
Recommended static pressure Pa 0 to 40
High 35 30 33 34
Med 33 29 30 32
Low 31 26 27 30
Quiet 30 25 24 29
High 35 30 33 34
Med 33 29 30 32
Low 31 26 27 30
Quiet 30 25 24 29
Dimensions (H × W × D) 294×410×39.9 294×700×39.9
Fin pitch 1.45
Rows x Stages 3×14 3×14
Pipe type
Fin type
Material
Colour
Net 217×663×595
Gross 324×785×686
Net 18 (40)
Gross 22 (48)
Liquid
Gas
Method
°C
%RH
Heating
°C
mm
230V ~ 50Hz
Aluminium
Copper
Siroccox2
80
198-264V ~ 50Hz
2×14
Power source
Cooling
m3/h
Heating
Available voltage range
Capacity
Cooling
Rated
Min-Max
Heating
Enclosure
Sound pressure level
Cooling
Heating
WIRED
Size
Weight
Operation range
Φ6.35(1/4in.)
Connection pipe
mm
Φ9.52(3/8in.) Φ12.70(1/2in.)
Flare
TYPE
INVERTER HEATPUMP
Model name
MULTI SATTELITE SYSTEM MODEL
324×1075×686
Rated
Min-Max
0 to 90
294×700×26.6
dB(A)
mm
Moisture removal
Fan
Airflow rate
-
Galvanized steel sheet
Heat exchanger type
kg(lb.)
23 (51)
27 (60)
1.3
Dimensions ( H×W ×D )
mm
217×953×595
Cooling
16 to 30
Remote controller type
Drain pipe
Material
Size
80 or less
18 to 32
Outer diameter 26.0 / Inner diameter 21.5
ABS
- (01 - 12) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
3-2. CASSETTE TYPE
AU F09LAL AU F12LAL AU F14LAL AU F18LAL
kW 2.7 3.5 4.2 5.2
BTU/h 9200 11900 14300 17800
kW 1.5-3.2 1.5-3.7 1.5-4.8 1.8-5.8
BTU/h 5100-10900 5100-12600 5100-16400 6100-19800
kW 3.3 3.8 4.8 6.0
BTU/h 11300 13000 16400 20500
kW 1.5-4.2 1.5-4.8 1.5-5.8 1.6-7.1
BTU/h 5100-14300 5100-16400 5100-19800 5500-24200
l/h (pints/h) 0.7(1.5) 1.1(2.3) 1.5(3.2) 1.8(3.8)
High 540 610 680 750
Med 490 530 580 610
Low 440 470 490 520
Quiet 390 410 410 410
High 540 600 700 800
Med 490 530 620 710
Low 440 470 550 600
Quiet 390 410 430 450
Type × Q'ty
Motor output W
High 33 37 40 42
Med 31 33 35 37
Low 29 31 32 33
Quiet 26 27 27 27
High 34 37 40 44
Med 32 33 37 41
Low 29 31 34 37
Quiet 27 28 29 30
Dimensions (H × W × D)
Fin pitch
Rows x Stages
Pipe type
Fin type
Material
Colour
Unit
Panel
Unit
Panel
Unit
Panel
Unit
Panel
Liquid
Gas
Method
°C
%RH
Heating °C
mm
Note : Specifications are based on the following conditions. Cooling : Indoor temperature of 27 °CDB / 19 °CWB.and outdoor temperature of 35 °CDB/24 °CWB. Heating : Indoor temperature of 20 °CDB / 15 °CWB.and outdoor temperature of 7°CDB/6 °CWB. Pipe length : 7.5 m, Height difference : 0 m.(Outdoor unit - Indoor unit)
MULTI SATTELITE SYSTEM MODEL
INVERTER HEATPUMP
230V 50Hz
6.35(1/4in.)
4.5 (10.0)
18 (40)
2.6 (5.7)
White
PS
120 × 765 × 755
Outer diameter 25.4 / Inner diameter 19.4
ABS
Wirelss
16 to 30
80 or less
18 to 32
Flare
9.52 (3/8in.)
12.70 (1/2in.)
Connection pipe Size
Dimensions ( H × W × D )
Net
Gross
Weight
Net
Gross
Operation range
Remote controller type
Drain pipe Material
Size
Cooling
Fan Airflow
rate Heat exchanger type
dB(A)
mm
Cooling
Heating
Enclosure (Panel)
Sound pressure level
Cooling
Heating
TYPE Model name
Moisture removal
Power source
Available voltage range
Capacity
Cooling
Heating
Rated
Min.-Max.
Rated
Min.-Max.
mm
mm
kg(lb.)
m3/h
265 × 730 × 625
49 × 700 × 700
15 (33)
245 × 570 × 570
198-264V 50Hz
210 × 1310 × 13.3 210 × 1250 × 13.3
1.2
Aluminium
Copper tube
2 x 10
Turbo x 1
42
- (01 - 13) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
3-3. UNIVERSAL TYPE
Note : Specifications are based on the following conditions. Cooling : Indoor temperature of 27 °CDB / 19 °CWB.and outdoor temperature of 35 °CDB/24 °CWB. Heating : Indoor temperature of 20 °CDB / 15 °CWB.and outdoor temperature of 7 °CDB/6 °CWB. Pipe length : 7.5 m, Height difference : 0 m.(Outdoor unit - Indoor unit)
ABF14LAT ABF18LAT
kW 4.2 5.2
BTU/h 14300 17800
kW 1.5-4.8 1.8-6.1
BTU/h 5100-16400 6100-20800
kW 4.8 6.0
BTU/h 16400 20500
kW 1.5-5.8 1.6-7.1
BTU/h 5100-19800 6100-24200
l/h (pints/h) 1.5(3.2) 1.7(3.6)
High 640 780
Med 590 700
Low 540 560
Quiet 480 500
High 640 780
Med 590 700
Low 540 560
Quiet 480 500
Type × Q'ty
Motor output W
High
36(Under ceiling) 39(Floor console)
41(Under ceiling)
44(Floor console)
Med
34(Under ceiling) 37(Floor console)
38(Under ceiling)
41(Floor console)
Low
33(Under ceiling) 36(Floor console)
34(Under ceiling)
37(Floor console)
Quiet
29(Under ceiling) 32(Floor console)
32(Under ceiling)
35(Floor console)
High
36(Under ceiling) 39(Floor console)
41(Under ceiling)
44(Floor console)
Med
34(Under ceiling) 37(Floor console)
38(Under ceiling)
41(Floor console)
Low
33(Under ceiling) 36(Floor console)
34(Under ceiling)
37(Floor console)
Quiet
29(Under ceiling) 32(Floor console)
32(Under ceiling)
35(Floor console)
Dimensions (H × W × D) 294×800×26.6 294×800×39.9
Fin pitch 1.2 1.3
Rows x Stages 2×12 3×12
Pipe type
Fin type
Material
Colour
Net
Gross
Net
Gross
Liquid
Gas
Method
°C
%RH
Heating
°C
mm
MULTI SATTELITE SYSTEM MODEL
INVERTER HEATPUMP
230V ~ 50Hz
80
198-264V ~ 50Hz
Siroccox2
Moisture removal
Available voltage range
Fan
TYPE
Model name
Power source
Capacity
Cooling
Rated
Min-Max
Heating
Rated
Min-Max
Airflow rate
Cooling
m3/h
Heating
Sound pressure level
Cooling
dB(A)
Heating
Heat exchanger type
mm
Copper
Aluminium
Enclosure
ABS
White(5Y9/0.5NN)
Dimensions ( H×W ×D )
mm
199×990×655
320×1150×790
Weight kg(lb.)
27 ( 60 )
36 ( 79 )
Connection pipe
Size mm
Φ6.35(1/4in.)
Φ12.70(1/2in.)
Flare
Operation range
Cooling
18 to 32
80 or less
16 to 30
Remote controller type Wirelss
Drain pipe
Material PVC
Size Outer diameter 29.0 / Inner diameter 25.0
- (01 - 14) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
3-4. WALL MOUNTED TYPE
AS A07LACM AS A09LACM AS A12LACM AS A14LACM AS A18LACM
kW 2.3 2.7 3.5 4.2 5.0
BTU/h 7900 9200 11900 14300 17100
kW 1.5-2.7 1.5-3.2 1.5-3.7 1.5-4.8 1.8-5.6
BTU/h 5100-9200 5100-10900 5100-12600 5100-16400 6100-19100
kW 2.7 3.3 4.0 4.8 6.0
BTU/h 9200 11300 13700 16400 20500
kW 1.5-3.3 1.5-4.2 1.5-4.8 1.5-5.8 1.6-7.1
BTU/h 5100-11300 5100-14300 5100-16400 5100-19800 5500-24200
l/h (pints/h) 0.8(1.7) 1.0(2.1) 1.2(2.5) 1.4(3.0) 2.0(4.2)
High 500 550 580 700 660
Med 430 460 480 580 540
Low 370 380 380 470 470
Quiet 270 280 300 360 390
High 500 550 600 700 660
Med 460 490 530 580 540
Low 420 450 470 500 470
Quiet 320 340 360 420 390
Type × Q'ty
Motor output W
High 35 38 39 45 45
Med 32 33 34 38 38
Low 27 28 28 33 34
Quiet 21 22 23 26 28
High 35 37 39 45 45
Med 32 33 34 38 38
Low 29 30 31 34 34
Quiet 22 23 24 28 28
Dimensions (H × W × D)
336 × 635 × 26.6
84 × 635 × 13.3
Fin pitch
1.2(2ROW)
1.4(1ROW)
Rows x Stages
2 × 16 + 1 × 4
Pipe type
Fin type
Material
Colour
Net
Gross
Net
Gross
Liquid
Gas
Method
°C
%RH
Heating °C
mm
Note : Specifications are based on the following conditions. Cooling : Indoor temperature of 27 °CDB / 19 °CWB.and outdoor temperature of 35 °CDB/24 °CWB. Heating : Indoor temperature of 20 °CDB / 15 °CWB.and outdoor temperature of 7°CDB/6 °CWB. Pipe length : 7.5 m, Height difference : 0 m.(Outdoor unit - Indoor unit)
Outer diameter 16.7 / Inner diameter 14.7
42
1.2
2 × 16
275 × 790 × 215
290 × 835 × 360
HIPS
White(5Y9/0.5NN)
FLARE
18 to 32
Size
mm
Weight
PE
12 (26.4)
9.52(3/8in.)
9 (20)
6.35(1/4in.)
12.70(1/2in.)
WIRELESS
Dimensions ( H × W × D )
Remote controller type
Material
Drain pipe Size
mm
Operation range Cooling
kg(lb.)
Connection pipe
mm
m3/h
Enclosure
Sound pressure level
Cooling
Heating
Fan Airflow
rate Heat exchanger type
Moisture removal
Cooling
dB(A)
Rated
Min.-Max.
Rated
Min.-Max.
Heating
TYPE Model name
Power source
Available voltage range
Capacity
Cooling
Heating
MULTI SATTELITE SYSTEM MODEL
INVERTER HEATPUMP
230 50Hz
198-264 50Hz
16 to 30
80 or less
Cross flow Fan x 1
Copper tube
Aluminium
336 × 635 × 26.6
- (01 - 15) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
3-5. FLOOR TYPE
AG F09LAC AG F12LAC AG F14LAC
2.45.37.2Wk
BTU/h 9200 11900 14300
kW 1.5-3.2 1.5-3.7 1.5-4.8
BTU/h 5100-10900 5100-12600 5100-16400
8.48.33.3Wk
BTU/h 11300 13000 16400
kW 1.5-4.2 1.5-4.8 1.5-5.8
BTU/h 5100-14300 5100-16400 5100-19800
l/h (pints/h) 0.7(1.5) 1.1(2.3) 1.5(3.2)
056006035hgiH
025094044deM
004083063woL
072072072teiuQ
056006035hgiH
045015064deM
034014083woL
072072072teiuQ
Type × Q'ty
Wtuptuo rotoM
442493hgiH
836343deM
130382woL
222222teiuQ
442493hgiH
938353deM
332303woL
222222teiuQ
Dimensions (H × W × D)
Fin pitch
Rows x Stages
Pipe type
Fin type
Material
Colour
Net
Gross
Net
Gross
Liquid
Gas 12.70 (1/2in.)
Method
°C
%RH
gnitaeH
mm
Note : Specifications are based on the following conditions. Coolin
g
: Indoor temperature of 27°CDB / 19 °CWB.and outdoor temperature of 35 °CDB/24° CWB. Heating : Indoor temperature of 20 °CDB / 15 ° CWB.and outdoor temperature of 7°CDB/6 °CWB. Pipe length : 7.5 m, Height difference : 0 m.(Outdoor unit - Indoor unit)
16 to 30
Wirelss
PCV
Outer diameter 28 / Inner diameter 16
MULTI SATTELITE SYSTEM MODEL
INVERTER HEATPUMP
230V 50Hz
198-264V 50Hz
Cross flow Fan x2
378×550×26.6
1.2
2x18
42
Copper tube
600×740×200
Aluminium
White
Ploystyrene
Connection pipe
Size
Dimensions ( H×W ×D )
Weight
Operation range
Remote controller type
Drain pipe
Material
Size
Cooling
Fan
Airflow rate
Heat exchanger type
dB(A)
mm
Cooling (2FAN)
Heating (2FAN)
Enclosure
Sound pressure level
Cooling (2FAN)
Heating (2FAN)
TYPE
Model name
Moisture removal
Power source
Available voltage range
Capacity
Cooling
Heating
Rated
Min.-Max.
Rated
Min.-Max.
9.52 (3/8in.)
mm
mm
kg(lb.)
700×820×310
m
3
/h
14 (31)
80 or less
Flare
18 to 32
17 (37)
6.35(1/4in.)
- (01 - 16) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
4-1. DUCT TYPE
MODEL : AR F09L, AR F12L, AR F14L, AR F18L
(Unit : mm)
( ) : AR F09L
886(596)
953(663)
850(560)
920(630)
600(400)
150
150
595
57520
85 75
364
390
194
217
BRACKETS
AIR FLOW OUTLET
CONTROL BOX
COUPLING PIPE ASSY
DRAIN PORT
1
Refrigerant piping flare connection (Gas) Refrigerant piping flare connection (Liquid) Drain piping connection
2
3
12
3
1 2
Top view
Front view
Side view
4. DIMENSIONS
- (01 - 17) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
INSTALLATION PLACE
MAINTENANCE HOLE
(Unit : mm)
(Unit : mm)
(Unit : mm)
Left side
Right side
100 or more
300 or more
Strong and durable ceiling
Indoor unit
Left side
Right side (PIPE side)
Strong and durable floor
100 or more 300 or more
30
or more30or more
Maintenance hole
Unit
100
or more
Control box
300
or more
BOTTOM AIR INTAKE HOLE
( ) : AR F09L
17718
20(15)811(531)
- (01 - 18) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
4-2. CASSETTE TYPE
MODEL : AU F09F, AU F12L, AU F14L, AU F18L
(Unit : mm)
MODEL : UTG-UF B-W
Decoration panel mounting state
Side view
Side view
Top view
Bottom view
- (01 - 19) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
INSTALLATION PLACE
100 or more
(4 directions) (3 directions)
Piping position
1,000 or more
Strong and durable ceiling
1,200 or more
Ceiling mode “Standard” : 2,500 - 3,000 Ceiling mode “High” : 3,000 - 3,500
Obstruction
Floor
(Unit : mm)
- (01 - 20) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
4-3. UNIVERSAL TYPE
MODEL : AB F14L, AB F18L
(Unit : mm)
100 hole
50 hole
125
100 hole
655
530
45
65
500 245
990
65
Wall bracket
Side of set
1
Refrigerant piping flare connection (Gas)
Refrigerant piping flare connection (Liquid)
Drain piping connection
Knock out hole for drain piping
Knock out hole for refrigerant piping
Hole for lifting bolt (Use M10 screw bolt)
2
3
4
5
6
1
2
3
45
6
3
1 2
Side view
Rear view
Bottom view
- (01 - 21) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
INSTALLATION PLACE
Ceiling
Left
Indoor unit
Right
Ceiling
150 or more 300 or more
20 or more
1000 or more
2300 or more
Left Right
300 or more300 or more
Obstruction
Floor
(Unit : mm)
- (01 - 22) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
MODEL : AS A07L, AS A09L, AS A12L, AS A14L, AS A18L
Front view Side view
INSTALLATION PLACE
1500 or over
2300 or over
Right side 90 or over
Left side 60 or over
50 or over
4-4. WALL MOUNTED TYPE
275
215790
(Unit : mm)
(Unit : mm)
- (01 - 23) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
4-5. FLOOR TYPE
(Unit : mm)
INSTALLATION PLACE
MODEL : AG F09L, AG F12L, AG F14L
200
600
740
Front view
Side view
10 cm or over
8 cm or over
8 cm or over
5 cm or over
15 cm or below from the floor
- (01 - 24) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
5. WIRING DIAGRAMS
MODEL : AR F09L, AR F12L, AR F14L, AR F18L
5-1. DUCT TYPE
- (01 - 25) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
5-2. CASSETTE TYPE
MODEL : AU F09L, AU F12L, AU F14L, AU F18L
- (01 - 26) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
5-3. UNIVERSAL TYPE
MODEL : AB F14L, AB F18L
- (01 - 27) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
MODEL : AS A07L, AS A09L, AS A12L, AS A14L, AS A18L
5-4. WALL MOUNTED TYPE
- (01 - 28) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
5-5. FLOOR TYPE
MODEL : AG F09L, AG F12L, AG F14L
ORANGE
YELLOW
RED
PINK
BLUE
ORANGE
YELLOW
RED
PINK
BLUE
ORANGE
YELLOW
RED
PINK
BLUE
ORANGE
YELLOW
RED
PINK
BLUE
WHITE
BLACK
RED
BLACK
BLACK
BLUE
BLUE
BLACK
BLACK
GRAY
GRAY
RED
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
YELLOW
RED
BLACK
BLUE
WHITE
YELLOW
RED
BLACK
BLUE
9 8 7 6 5 4 3 2 1
7 6 5 4 3 2 1
7 6 5 4 3 2 1
6 5 4 3 2 1
6 5 4 3 2 1
5 4 3 2 1
5 4 3 2 1
7 6 5 4 3 2 1
1 2 3 4 5 6 7 8 9
1
2
3
4
5
6
1
2
3 4 5 6 7
8
9
5 4 3 2 1
4 3 2 1
4 3 2 1
2 1
2 1
2 1
4 3 2 1
4 3 2 1
565
6
4 3 2 1
5
6
4 3 2 1
5
6
4 3 2 1
5
4 3 2 1
5
4
3
2
1
5
6
CN202
CN203
CN201
CN11
CN17
CN10
CN3
CN12
CN1CN13
CN18
CN8CN5
CN6
CN2
TM1
TM5
TM2
THERMAL FUSE 102
TERMINAL
TO OUTDOOR UNIT
1
2
3
STEP MOTOR ( DAMPER )
M
M
STEP MOTOR ( UP / DOWN )
STEP MOTOR ( DAMPER LOCK RIGHT )
M
STEP MOTOR ( DAMPER LOCK LEFT )
M
FAN MOTOR ( LOWER )
F M
F M
FAN MOTOR ( UPPER )
PIPE THERMISTOR
ROOM THERMISTOR
TEST
SWITCH
SWITCH
INDICATOR PCB ASSY
SWITCH PCB ASSY
CONTROLLER PCB ASSY ( MAIN PCB )
3 2 1
REMOTE
CONTROL
UNIT
(OPTION)
- (01 - 29) -
MULTI TYPE
2ROOM TYPE
MULTI TYPE
2ROOM TYPE
6. CAPACITY TABLE
Room 1 Room 2 Total Room 1 Room 2 Room 1 Room 2 Min. Rated Max. Min. Rated Max.
Min. 14 kBTU 7 7 14 2.30 2.30 2.70 2.70 2.00 4.60 5.40 0.68 1.39 1.68 3.31
A
Max. 24 kBTU 7 9 16 2.35 2.75 2.70 3.20 2.00 5.10 5.90 0.68 1.56 1.84 3.27
A
7 12 19 2.18 3.32 2.50 3.80 2.00 5.50 6.30 0.68 1.65 2.03 3.33
A
7 14 21 1.95 3.55 2.30 4.20 2.00 5.50 6.50 0.68 1.65 2.40 3.33
A
9 9 18 2.70 2.70 3.15 3.15 2.00 5.40 6.30 0.68 1.65 2.06 3.27
A
9 12 21 2.40 3.10 2.83 3.67 2.00 5.50 6.50 0.68 1.65 2.40 3.33
A
9 14 23 2.15 3.35 2.54 3.96 2.00 5.50 6.50 0.68 1.65 2.40 3.33
A
12 12 24 2.75 2.75 3.25 3.25 2.00 5.50 6.50 0.68 1.65 2.40 3.33
A
Cooling capacity
for each indoor
unit Rated (kW)
Total cooling capacity (kW)
Total Input (kW)
Cooling capacity
for each indoor
unit Max (kW)
Indoor model for each room
695
780
825
825
Annual energy
consumption
(KW/h)
EER
(kW/kW)
Class
825
825
825
825
Room 1 Room 2 Total Room 1 Room 2 Room 1 Room 2 Min. Rated Max. Min. Rated Max.
Min. 14 kBTU 7 7 14 2.60 2.60 3.20 3.20 2.20 5.20 6.40 0.68 1.34 1.75 3.88 A
Max. 24 kBTU 7 9 16 2.85 3.35 3.35 3.95 2.20 6.20 7.30 0.68 1.65 2.22 3.76 A
7 12 19 2.59 3.71 3.17 4.53 2.20 6.30 7.70 0.68 1.65 2.40 3.82 A
7 14 21 2.36 4.04 2.87 4.93 2.50 6.40 7.80 0.75 1.66 2.40 3.86 A
9 9 18 3.15 3.15 3.85 3.85 2.20 6.30 7.70 0.68 1.65 2.22 3.82 A
9 12 21 2.85 3.45 3.53 4.27 2.20 6.30 7.80 0.75 1.65 2.40 3.82 A
9 14 23 2.61 3.79 3.18 4.62 2.50 6.40 7.80 0.75 1.65 2.40 3.88 A
12 12 24 3.15 3.15 3.90 3.90 2.20 6.30 7.80 0.75 1.65 2.40 3.82 A
Indoor model for each room
Heating capacity
for each indoor unit Rated (kW)
Total heating capacity (kW)
Total Input (kW)
Heating capacity
for each indoor
unit Max (kW)
Annual energy
consumption
(KW/h)
COP
(kW/kW)
Class
670
825
825
830
825
825
825
825
6-1. COMBINATIONS
MODEL : AO18L2
COOLING
NOTES
Cooling capacity is based on 27°CDB/19°CWB (indoor temperature) , 35°CDB (outdoor temperature) The total ability of connected a indoor unit is up to 27000BTU.
HEATING
NOTES
Heating capacity is based on 20°CDB (indoor temperature) , 7°CDB/6°CWB (outdoor temperature) The total ability of connected a indoor unit is up to 27000BTU.
Loading...
+ 93 hidden pages