Genelec AIW25 Data Sheet [ru]

AIW25

Data Sheet
Genelec AIW25

Active In-Wall Loudspeaker

Genelec’s new AIW25 Active In-Wall loud-

speaker system consists of a two-way

loudspeaker enclosure and a matched re-

mote amplifier module RAM2. It has been

designed to the same rigorous standards

as Genelec’s high-performance HT series

active Home Theater loudspeakers, en-

suring that no other in-wall loudspeaker of

similar size can match the low distortion,

neutrality and sound pressure capability of

Genelec AIW25. The AIW25 can be used

in demanding applications: as the main L-

C-R array of a small Home Theater sys-

tem, a critical Stereo listening or rear/side

channels of a medium sized, high quality

Home Theater for example.

The AIW25 loudspeaker has a 5” bass

driver loaded with a 4.7 liter enclosure

and a 3/4” treble driver with a proprietary

Directivity Control WaveguideTM (DCWTM)

giving a precise and uncolored acoustic

response. The RAM2 remote amplifier

module includes an active crossover cir-

cuitry and 40 + 40 W power amplifiers for

the bass and treble driver respectively.

RCA and balanced XLR line level input

connectors and adjustable input sensi-

tivity ensure convenient connection to all

types of decoders. Connectors for remote

power/standby mode switching are also

provided. The active crossover unit al-

lows accurate Bass Tilt, Bass Roll-Off and

Treble Tilt adjustments for fine-tuning the

sound balance to suit various acoustical

conditions and listener tastes.

The solid, carefully dimensioned enclo-

sure gives far better control of bass repro-

duction than typical in-wall loudspeakers.

The loudspeaker fits into a standard 2 x

4” wall structure and can easily be retrofit-

ted to existing construction and the visible

parts of the loudspeaker can be painted to

match the wall colour.

The RAM2 amplifier module can be

rack mounted with its dedicated Rack

Mount Kit (optional) or placed on a shelf

or into a cabinet. The wiring between the

amplifier module and loudspeaker can be

made of standard 18 to 10 gauge 4-con-

ductor wire. Expensive proprietary cables

are not needed. Each loudspeaker/ampli-

fier combination has been carefully tested

and matched together before delivery for

maximum accuracy.

Visit Genelec’s Home Theater website

www.genelec-ht.com for information of

Genelec’s Home Theater loudspeaker line.

AIW25 Data Sheet

260 (10 1/4")

54 (2 1/8")

47 (1 27/32")

12 (15/32")

16 (5/8")

149 (5 7/8")

177 (6 31/32")

104 (4 3/32")

98 (3 27/32")

85 (3 11/32")

360 (14 3/16")

332 (13 1/16")

267 (10 1/2")

237 (9 11/32")

Figure 1. The main dimensions of the AIW25 loudspeaker cabinet

SyS te m Speci fi cAtionS

AiW25

Lower cut-off frequency, –3 dB

Upper cut-off frequency, –3 dB > 20 kHz

Free field frequency response 70 Hz – 18 kHz (± 2.5 dB)

Maximum short term sine wave acoustic
output on axis in half space, averaged from
100 Hz to 3 kHz

Maximum peak acoustic output per pair with
music material

Self generated noise level in half space at 1 m
on axis (A-weighted)

Harmonic distortion at 85 dB SPL
at 1 m on axis

Freq: 70…200 Hz
> 200 Hz

Drivers

Bass
Treble

Weight

Loudspeaker cabinet
Amplifier

Dimensions

Loudspeaker cabinet max. height
Loudspeaker cabinet max. width
Loudspeaker cabinet max. depth

Cutout height
Cutout width
Minimum free depth measured from the
surface of the wall

Amplifier height
Amplifier width
Amplifier depth*

*Note that the cable connectors require at
least 100 mm (4”) of space behind the
amplifier

Genelec Documen t BBA0064001a. Copyright Genelec Oy 9.2006. All data subject to chang e without prior notice

≤ 68 Hz

@ 1 m > 100 dB SPL

@ 1 m > 110 dB SPL

≤ 10 dB

< 3%
< 0.5 %

130 mm (5") cone
19 mm (3/4") metal dome

3.7 kg (8.1 lb)

2.2 kg (4.8 lb)

360 mm (143/16”)
267 mm (101/2”)
104 mm (43/32”)

334 mm (135/32”)
240 mm (97/16”)
98 mm (327/32”)

177 mm (631/32”) (4U)
54 mm (21/8”)
260 mm (101/4”)

Bass amplifier short term output power
Treble amplifier short term output power
(Long term output power is limited by driver
unit protection circuitry)

Amplifier system THD at nominal output

Mains voltage 100, 120 or 230 V

Power consumption (average)

Recommended loudspeaker cable gauge 0.8 to 5.0 mm2

Standby/On switching by signal sensing Autostart function or +12 V DC
remote control

Connectors:

Input level for 100 dB SPL output at 1 m -6 dBu

Input Sensitivity adjustment range +6 dBu to -6 dBu

Crossover frequency, Bass/Treble 3.0 kHz

Treble Tilt control operating range 0 to –2 dB @ 15 kHz

Bass Tilt control operating range in –2 dB
steps

Bass Roll-Off control -6 dB @ 85 Hz

The ‘CAL’ position is with all tone controls set to ‘off’ and the input sensitivity
control to maximum (fully clockwise).

Inter national e nquiries:

Genele c, Olvitie 5

FIN-74 100, Iisal mi, Finlan d

Phone [phone]

Fax [phone]

Email genelec@g enelec.com

Figure 2. The main dimensions of the RAM2 amplifier

Amp li fi er Se ct io n

Idle
Full output

croSSoVer Sectio n

XLR female input, balanced 10 kOhm
RCA female input, unbalanced 10 kOhm
“LINK OUT” XLR male output, balanced
10 kOhm

In the U.S. please c ontact:

Genele c, Inc., 7 Tech Circl e

Natick, MA 01760 , U.S.A.

Phone [phone]

Fax [phone]

Email genelec.u [e-mail]

In China please contact:

Beijing Genelec Audio Co. Ltd.

Jianwai SOHO, Tower 12, Room 2306

39 East 3rd Rin g Road

Chaoyang District, Beijing 100022, China

Phone [phone]

Fax [phone]

AiW25

40 W at 8 Ohm load
40 W at 8 Ohm load

≤ 0.08 %

10 VA
80 VA

(18 to 10 AWG)

AiW25

pin 1 gnd, pin 2 +, pin 3 ­pin +, ring gnd
pin 1 gnd, pin 2 +, pin 3 -

From 0 to -6 dB @ 100 Hz

www.genelec.com

In Sweden please contact:

Genelec Sverige

Box 5521, S-141 05 Huddinge

Phone [phone]

Fax [phone]

Email info@genelec .com