Genelec AIC25 Data Sheet [ru]

AIC25

Data Sheet
Genelec AIC25

Active In-Ceiling Loudspeaker

Genelec’s new AIC25 Active In-Ceiling

loudspeaker system consists of a two-way

loudspeaker enclosure and a matched

remote amplifier module RAM2. It has

been designed to the same rigorous stan-

dards as Genelec’s high-performance HT

series active Home Theater loudspeak-

ers, ensuring that no other in-ceiling loud-

speaker of similar size can match the low

distortion, neutrality and sound pressure

capability of the AIC25.

The AIC25 loudspeaker has a 5” bass

driver loaded with a 4.7 liter enclosure and

a 3/4” treble driver giving a precise and

uncolored acoustic response. The RAM2

remote amplifier module includes an active

crossover circuitry and 40 + 40 W power

amplifiers for the bass and treble driver

respectively. RCA and balanced XLR line

level input connectors and adjustable input

sensitivity ensure convenient connection

to all types of decoders. Connectors for

remote power/standby mode switching are

also provided. The active crossover unit

allows accurate Bass Tilt, Bass Roll-Off

and Treble Tilt adjustments for fine-tuning

the sound balance to suit various acousti-

cal conditions and listener tastes.

The solid, carefully dimensioned enclo-

sure gives far better control of bass

reproduction than typical in-ceiling loud-

speakers. The loudspeaker enclosure

requires only 158 mm (63/16”) of free depth

inside the ceiling structure and can easily

be retrofitted to existing construction and

the visible parts of the loudspeaker can be

painted to match the colour of the ceiling.

The RAM2 amplifier module can be

rack mounted with its dedicated Rack

Mount Kit (optional) or placed on a shelf

or into a cabinet. The wiring between the

amplifier module and loudspeaker can be

made of standard 18 to 10 gauge 4-con-

ductor wire. Expensive proprietary cables

are not needed. Each loudspeaker/ampli-

fier combination has been carefully tested

and matched together before delivery for

maximum accuracy.

Visit Genelec’s Home Theater website

www.genelec-ht.com for more information

of Genelec’s Home Theater loudspeaker

line.

AIC25 Data Sheet

284 (11 3/16")

250 (9 27/32")

284 (11 3/16")

153 (6 1/32")

158 (6 3/16")

139 (5 15/32")

260 (10 1/4")

54 (2 1/8")

47 (1 27/32")

12 (15/32")

16 (5/8")

149 (5 7/8")

177 (6 31/32")

Lower cut-off frequency, –3 dB

Upper cut-off frequency, –3 dB > 20 kHz

Free field frequency response 70 Hz – 18 kHz (± 2.5 dB)

Maximum short term sine wave acoustic
output on axis in half space, averaged from
100 Hz to 3 kHz

Maximum peak acoustic output per pair with
music material

Self generated noise level in half space at 1 m
on axis (A-weighted)

Harmonic distortion at 85 dB SPL
at 1 m on axis

Drivers

Weight

Dimensions

*Note that the cable connectors require at
least 100 mm (4”) of space behind the
amplifier

Genelec Documen t BBA0064002a. Copyright Genelec Oy 9.2006. All data subject to chang e without prior notice

Figure 1. The main dimensions of the AIC25 loudspeaker cabinet

SyS tem S pec ifi cAtio nS

Aic25

≤ 68 Hz

@ 1 m > 100 dB SPL

@ 1 m > 110 dB SPL

≤ 10 dB

Freq: 70…200 Hz
> 200 Hz

Bass
Treble

< 3%
< 1 %

130 mm (5") cone
19 mm (3/4") metal dome

Loudspeaker cabinet
Amplifier

Loudspeaker cabinet max. diameter
Loudspeaker cabinet max. depth

Cutout diameter
Minimum free depth measured from the
surface of the ceiling

Amplifier height
Amplifier width
Amplifier depth*

3.0 kg (6.6 lb)

2.2 kg (4.8 lb)

284 mm (113/16”)
158 mm (63/16”)

257 mm (101/8”)
160 mm (64/16”)

177 mm (631/32”) (4U)
54 mm (21/8”)
260 mm (101/4”)

Bass amplifier short term output power
Treble amplifier short term output power
(Long term output power is limited by driver
unit protection circuitry)

Amplifier system THD at nominal output

Mains voltage 100, 120 or 230 V

Power consumption (average)

Recommended loudspeaker cable gauge 0.8 to 5.0 mm2

Standby/On switching by signal sensing Autostart function or +12 V DC
remote control

Connectors:

Input level for 100 dB SPL output at 1 m -6 dBu

Input Sensitivity adjustment range +6 dBu to -6 dBu

Crossover frequency, Bass/Treble 3.0 kHz

Treble Tilt control operating range 0 to –2 dB @ 15 kHz

Bass Tilt control operating range in –2 dB
steps

Bass Roll-Off control -6 dB @ 85 Hz

The ‘CAL’ position is with all tone controls set to ‘off’ and the input sensitivity
control to maximum (fully clockwise).

Inter national e nquiries:

Genele c, Olvitie 5

FIN-74 100, Iisal mi, Finlan d

Phone [phone]

Fax [phone]

Email genelec@g enelec.com

Figure 2. The main dimensions of the RAM2 amplifier

Amp lifie r S ect ion

Idle
Full output

croSSoVer Sec tion

XLR female input, balanced 10 kOhm
RCA female input, unbalanced 10 kOhm
“LINK OUT” XLR male output, balanced
10 kOhm

In the U.S. please c ontact:

Genele c, Inc., 7 Tech Cir cle

Natick, MA 01760 , U.S.A.

Phone [phone]

Fax [phone]

Email genelec.u [e-mail]

In China please contact:

Beijing Genelec Audio Co. Ltd.

Jianwai SOHO, Tower 12, Room 2306

39 East 3rd Rin g Road

Chaoyang District, Beijing 100022, China

Phone [phone]

Fax [phone]

Aic25

40 W at 8 Ohm load
40 W at 8 Ohm load

≤ 0.08 %

10 VA
80 VA

(18 to 10 AWG)

Aic25

pin 1 gnd, pin 2 +, pin 3 ­pin +, ring gnd
pin 1 gnd, pin 2 +, pin 3 -

From 0 to -6 dB @ 100 Hz

www.genelec.com

In Sweden please contact:

Genelec Sverige

Box 5521, S-141 05 Huddinge

Phone [phone]

Fax [phone]

Email info@genelec .com