Page 1
Genelec 7060B, 7070A and
7071A Active Subwoofers
Data Sheet
LSE Series
Page 2
enclosure design
Bass Management System
performance
chaining” units
Active Subwoofers 7060B, 7070A and 7071A
Active Subwoofers 7060B, 7070A and 7071A
for modern 6.1 or 5.1 channel Surround
With their 19 Hz lower cut-off frequency, high
tile bass management systems, they can be
The amplifier u nit integ rated into the
The amplifier has adjustable sensitivity,
tailor the response of the subwoofer to its
TM
cabinet construction
These LSE series subwoof ers feature
TM
) bass reflex cabinet. The cabinet
The curved shape also offers excellent struc-
tural stiffness and optimal packing of a very
The bass management unit is mounted
With their built-in bass management unit the
frequency response and SPL performance.
Two or more subwoofers can be coupled
together via the “SUM OUT” connector if a
The phase correction switch in the bass
without phase cancellation.
The 7060B has one 250 mm (10”) cone driver,
the 7070A one 305 mm (12”) cone and the
Amplifier
The amplifiers produce 120, 250 and 500 W of
The built-in bass management unit splits
the six main channel input signals into low
to allow easy level matching with the main
whole monitoring system can be determined.
A dedicated “LFE IN” input connector
to two bandwidths: 19 to 85 Hz or 19 to 120
Page 3
frequencies above 85 Hz in the LFE signal
tor. The sensitivity of the LFE channel can
To provide a flat bass response in many
tion for the phase delay which occurs if the
vided between 0° and -270°.
Overload LED
for bypass and +10 dB
LFE functions
for different bass roll-off and LFE bandwidth
frequency response for different bass roll-off
The amplifier panel layout of a 7000 series subwoofer.
Page 4
7060B / 7070A / 7071A Data Sheet
AMPLIFIER SECTION
INPUT SECTION
CROSSOVER SECTION
SYSTEM SPECIFICATIONS
7060B 7070A 7071A
30 to 85 Hz, measured in
108 dB SPL
112 dB SPL
118 dB SPL
113 dB SPL
117 dB SPL
123 dB SPL
free field @ 1 m on axis
15 dB
2nd
≤ 2 %
≤ 3 %
≤ 3 %
3rd
≤ 3 %
≤ 3 %
≤ 3 %
Weight 26 kg (57 lbs) 50 kg (110 lbs) 81 kg (178 lb s)
Height 527 mm (20 3/4”) 625 mm (24 5/8”) 755 mm (29 3/4”)
Width 462 mm (18 3/16”) 555 mm (21 7/8”) 803 mm (31 5/8”)
Depth 363 mm (14 5/16”) 490 mm (1 9 5/16”) 490 mm (19 5/16”)
7060B 7070A 7071A
Amplifier system distorti on
0.05%
or 115/230 V
Idle 15 VA 15 VA 30 VA
Full output 150 VA 250 VA 500 VA
OUTPUT SECTION
CONTROLS
7060B 7070A 7071A
pin 1 gnd
pin 2 +
pin 3 –
7060B 7070A 7071A
pin 1 gnd
pin 2 +
pin 3 –
7060B 7070A 7071A
Test tone for phase adjustment 85 Hz
7060B 7070A 7071A
Lowpass 36 dB/octave
Highpass 12 dB/octave
50 dB
www.genelec.com
Jianwa i SOHO, Tower 12 , Room 230 6
39 Eas t 3rd Ring Road
Loading...