Genaray SpectroLED 14 User Manual

SpectroLED 14
Flood Light

USER MANUAL

SPECTROLED 14
FLOOD LIGHT
INTRODUCTION

SpectroLED-14 Flood Light - USER MANUAL

2

THANK YOU FOR CHOOSING GENARAY

The Genaray SpectroLED 14 LED Flood Light fixture
provides photographers and videographers with a bright and
continuous daylight-balance light source with broad 120°
coverage. This 120 W LED fixture can operate on AC or battery
power, and it features flicker-free dimming from 100% to
10% along with a high CRI for precise color accuracy and
rendering.

This LED fixture features SDM technology for the widest
coverage offered by LED lights. When used with its dedicated

31.5-inch octagonal softbox (sold separately), the light
delivers an even, wraparound light that’s perfect for portrait
photography as well as video interviews. For multi-light
setups, the dimmer can be controlled from up to 100 feet away
with Genaray’s wireless remote (sold separately). Because
LED lights produce very little heat, the SpectroLED 14 can be
used for extended periods without overheating.

PRECAUTIONS

· Please read and follow these
instructions, and keep this
manual in a safe place.

· Keep this unit away from water and
any flammable gases or liquids.

· Make sure the unit is powered off
when plugging it into a power source.

· Use only the correct,
recommended voltage.

· Handle the unit with care.

· Do not attempt to disassemble or
repair the equipment—doing so will
void the warranty, and Genaray will
not be responsible for any damage.

· Do not stare directly at the lights
when they are powered on.

· Clean the unit with only
a soft, dry cloth.

· Images are for illustrative
purposes only.

SpectroLED-14 Flood Light - USER MANUAL

Precautions

3

SPECTROLED 14
FLOOD LIGHT
OVERVIEW

SpectroLED-14 Flood Light - USER MANUAL

4

Angle adjustment knob

Flex rod holes