Genaray MB-50DWV User manual

MonoBright™
LED DAYLIGHT 750
USER MANUAL
MonoBright LED Daylight 750 - USER MANUAL
1
MonoBright™ LED DAYLIGHT 750 INTRODUCTION
MonoBright LED Daylight 750 - USER MANUAL
2
Thank you for choosing Genaray.
The MonoBright is compatible with worldwide AC voltage and can also be run on an optional 12 V DC battery. Thanks to its compact, lightweight build and convenient carry handle, the MonoBright is perfect for the traveling or location photographer.
The MonoBright offers brightness adjustment from 100%–10%, which can be controlled from either the rear panel or the included 2.4 GHz wireless transmitter. With the transmitter, you can wirelessly adjust output for multiple MonoBright units—even at different outputs— making this a convenient tool for use in a sophisticated lighting setup. With the ability to use any of 99 channels, you’ll be able to work wirelessly and simply from up to 98´ (30 m) away. During the course of a shoot, you can use the transmitter to turn the unit off, and it will retain your settings the next time you turn it on.
This LED’s monolight housing makes adding accessories easy. The built-in umbrella receptacle and S-mount allow you to attach light modifiers like umbrellas, softboxes, and beauty dishes to customize and sculpt your light for the perfect look.
MonoBright LED Daylight 750 - USER MANUAL
TABLE OF CONTENTS
Introduction ................................ 2-3
Precautions ................................4-5
Overview ......................................6-9
Mounting the MonoBright ..........10
Mounting Accessories ...........11-12
Powering the MonoBright ....13-14
The Control Panel .................. 15-16
The Wireless Transmitter .....17-20
Sleep Mode ...................................21
Specifications .........................22-23
FCC Statement .............................23
Warranty .......................................24
PRECAUTIONS
PRECAUTIONS
· Please read and follow these instructions and keep this manual in a safe place.
· Keep this product away from water and any flammable gases or liquids.
· Do not leave the device in a closed vehicle under the sun or in other areas subject to very high temperatures.
· Remove the front transport cap before operating the MonoBright.
· Make sure this product is powered off when plugging it into a power source.
MonoBright LED Daylight 750 - USER MANUAL
4
· Always remove the power cord by holding the plug; do not pull the cord.
· Disconnect the power cord from the power supply when not in use.
· Use only the correct, recommended voltage.
· Do not attempt to disassemble or repair this product. There are components inside that can produce a hazardous electric shock.
· Do not stare at the light when it is powered on.
· Do not point directly towards the naked eye (especially those of infants and small children)—it may lead to visual impairment.
· Avoid any unnecessary impact to the unit, as this can damage the LED.
· Handle this product with care.
· Do not touch the LED or expose it to moisture.
· If necessary, clean the LED with only a lint-free, cotton cloth. Do not smudge.
· Keep this product away from children.
· Make sure that this product is intact and that there are no missing parts.
· All photos are for illustrative purposes only.
PRECAUTIONS
MonoBright LED Daylight 750 - USER MANUAL
5
PRODUCT OVERVIEW
S-mount
HiBrite microLED PCB
Umbrella receptacle
Mounting socket
MonoBright LED Daylight 750 - USER MANUAL
6
Locking knob
Handle
Accessory release
PRODUCT OVERVIEW
Umbrella thumbscrew Tilt adjustment
knob
MonoBright LED Daylight 750 - USER MANUAL
7
PRODUCT OVERVIEW
Power Switch
MonoBright LED Daylight 750 - USER MANUAL
8
Wireless sensor
Dimmer indicator
Display
Dimmer knob
DC and AC adapter XLR input socket
Loading...
+ 16 hidden pages