Genaray MB-50BV User manual

MonoBright™

LED BI-COLOR 750

USER MANUAL

MonoBright LED Bi-Color 750 - USER MANUAL

1

MonoBright™
LED BI-COLOR 750
INTRODUCTION

MonoBright LED Bi-Color 750 - USER MANUAL

2

Thank you for choosing Genaray.

The Genaray MonoBright™ LED Bi-Color 750 incorporates
the HiBrite Bi-Color microLED PCB to provide energy
efficiency, high efficacy, and low heat in a compact, lightweight
monolight housing. The MonoBright Bi-Color emits an
intense 8,000 lux (lx) of continuous light and draws only
100 W to deliver the equivalent output of a 750 W open-face
tungsten light. Its microLED circuitry offers outstanding
longevity with 50,000 hours of use. The bi-color feature
lets you adjust the color temperature from 3200–5600 K
to customize and fine-tune your light, and a high color
rendering index (CRI) of ›90 optimizes color accuracy.

The MonoBright LED Bi-Color is compatible with worldwide
AC voltages (with appropriate plug adapter) and can also
be run on an optional 12 V DC battery. Thanks to its small,
lightweight build and convenient carry handle, the MonoBright
is perfect for the traveling or location photographer.

TABLE OF
CONTENTS

Introduction ................................2-3

The MonoBright LED Bi-Color offers brightness
adjustment from 100%–10%, which can be controlled
from either the rear panel or an optional 2.4 GHz
wireless transmitter. The transmitter can also control
the unit’s color temperature, making it a convenient
remote for use in a sophisticated lighting setup. During
the course of a shoot, you can turn the unit off from
either the control panel or the transmitter, and it will
retain your settings the next time you turn it on.

This LED’s monolight housing makes adding
accessories easy. The built-in umbrella receptacle
and S-mount allow you to attach light modifiers
like umbrellas, softboxes, and beauty dishes to
customize and sculpt your light for the perfect look.

MonoBright LED Bi-Color 750 - USER MANUAL

Precautions ................................4-5

Overview ......................................6-9

Mounting the MonoBright ..........10

Mounting Accessories ...........11-12

Powering the MonoBright ....13-14

The Control Panel .................. 15-17

Specifications .........................18-19

FCC Statement .............................19

Warranty .......................................20

PRECAUTIONS

PRECAUTIONS

· Please read and follow these
instructions and keep this
manual in a safe place.

· Keep this product away from water
and any flammable gases or liquids.

· Do not leave the device in a
closed vehicle under the sun
or in other areas subject to
very high temperatures.

· Remove the front transport cap before
operating the MonoBright Bi-Color.

· Make sure this product is powered off
when plugging it into a power source.

MonoBright LED Bi-Color 750 - USER MANUAL

4

· Always remove the power cord by
holding the plug; do not pull the cord.

· Disconnect the power cord from
the power supply when not in use.

· Use only the correct,
recommended voltage.

· Do not attempt to disassemble
or repair this product. There are
components inside that can produce
a hazardous electric shock.

· Do not stare at the light
when it is powered on.

· Do not point directly towards the
naked eye (especially those of
infants and small children)—it
may lead to visual impairment.

· Avoid any unnecessary impact to the
unit, as this can damage the LED.

· Handle this product with care.

· Do not touch the LED or
expose it to moisture.

· If necessary, clean the LED
with only a lint-free, cotton
cloth. Do not smudge.

· Keep this product away from children.

· Make sure that this product is intact
and that there are no missing parts.

· All photos are for illustrative
purposes only.

PRECAUTIONS

MonoBright LED Bi-Color 750 - USER MANUAL

5

PRODUCT
OVERVIEW

S-mount

HiBrite Bi-Color
microLED PCB

Umbrella
receptacle

Mounting socket

MonoBright LED Bi-Color 750 - USER MANUAL

6

Locking knob