CD Players
Mixers
DJ Mics
iSeries
Turntables
DJ Systems
1
7
12
14
18
20
Amplifiers
Speakers
Wireless Systems
Outboards
Road Cases
Headphones
22
26
32
35
36
36
Seamless loop allows a section of music to be repeated indefinitely without
any interruption. Reloop starts the loop from the beginning.
These buttons allow you to access the CDT-05’s on-board DSP
effects, including Flanger, Echo, and Filter.*
With the removable straight tone arm system, you are guaranteed
the highest quality tracking available. The tone arm's shape
naturally eliminates the additional tracking forces that are
caused by conventional S-shape tone arms, thus ensuring virtually
skip-free performance.
CD Players
Introducing the CDT-05 Professional Hybrid
Turntable, the first turntable of its kind allowing
you to spin vinyl and CDs on a single unit. The
CDT-05 delivers everything you’ve come to
expect from a high-end turntable combined
with the power of a fully featured CD player that
can be controlled through a full-sized aluminum
platter. With all this and much more, the CDT-05
Professional Hybrid Turntable promises to provide
DJs with a level of versatility never before seen
in a single compact design.
> Audio CD, CD-R, CD-RW, and MP3 compatible
> Removable, virtually unskippable straight tone arm system
> High-Torque Direct Driven platter (3.6 kg/cm) provides
full control over CD playback
> Independent audio outputs for turntable and CD sections
> 3-position CD/TT mode switch allows simultaneous
playback of both CD and vinyl
> 3 DSP effects: Filter, Echo, and Flanger with variable parameters
> Reverse switch
> Motor ON/OFF switch
> 3 Hot-Startable cue points with easy to operate memo button
> Master cue w/ hot-start feature
> Key Lock (Master Tempo)
> Anti-Shock Protection using RAM buffer memory
> Slot Loading mechanism with LED illumination
> Single auto-cue/continuous play modes
> Seamless looping with reloop/stutter & loop editing
> Pitch bend via platter or buttons
> Three mode time selection
> Frame accurate search & cue
> Large 4-line backlit dot matrix display
> Sturdy aluminum platter with finger grooves
> Variable Pitch control with ranges of 4%, 8% , 16%, and 50%
> Soft touch buttons with bright LEDs
Unit Dimensions: 17.75” x 14.65” x 6.3” (450 x 372 x 160.5mm)
Weight: 19.8 lbs. (9 kg)
Shipping: 22.8 lbs. (10.36kg)
The variable pitch slider gives you the power to manipulate the speed
and pitch of the current track on your CD or record. You can make
adjustments as precise as 4% or as broad as 50% using the LED buttons
above the slider. There is also a Key Lock button that will allow you to
speed up or slow down the record without affecting the pitch.
The TT/CD Mode switch lets you choose whether you want to use
the CD Player, the Turntable, or both simultaneously. With MIX mode
you can play a CD while scratching over it with a piece of vinyl.
This button lets you toggle between 33, 45, and 78 RPM, allowing you
to play practically any piece of vinyl in your collection.
The CDT-05 comes with a direct drive motor featuring 3.6 kg/cm of
torque. When you’re not spinning records, you can utilize the Vinyl
Control Disc installed on the platter which allows you to manipulate CD
playback just like you would a real piece of vinyl.
> Audio CD, CD-R, & CD-RW compatible
> 3 hot cue points per side
> 4 DSP effects: Filter, Zoom, Trans, & Echo
> Parameter control via rubber jog wheel
> “State of the art” master tempo
> Robo Start
> Vinyl/CD jog mode function
> Anti-shock using RAM buffer memory
> Fully programmable direct access keypad
> Single auto-cue/continuous play mode
> Seamless looping with reloop/stutter & loop editing
> Pitch bend via jog wheel or buttons
> Three time display modes
> Frame accurate search & cue
> Large blue backlit LCD display
> LED target light for draw mechanism
> Coaxial RCA digital output
> Rubber jog wheel with finger grooves
> Variable pitch control range of 4%, 12%, 24%, & 100%
> Soft touch buttons with bright LEDs
Main Unit Dimensions: 19” x 3.5” x 10” (482 x 88 x 254mm)
Remote Control Dimensions: 19” x 3.5” x 3.6” (482 x 88 x 92mm)
Main Unit Weight: 11 lbs. (5 kg)
Remote Weight: 3.5 lbs. (1.5 kg)
Shipping: 20.5 lbs. (9.3 kg)
> Reads CD, CD-3, CD-RW, and MP3 CD
> File & folder text
> All functions work with MP3 files
> Text readout of MP3 files
> Decodes MP3 Compression up to 320 Kbps
> 8 DSP effects: Filter, Zoom, Echo, Pan, Reverse, Trans, Brake & Scratch
> Precise Dry/Wet FX parameter, start & brake rotary controls
> 5 Fly cues & 4 sampler memory buttons
> Easy to operate memo button for cue function & sampling
> Vinyl/CD jog mode function
> Master cue has hot>start feature
> +10 track selection knob
> Key lock & BPM controls
> Anti-shock using RAM buffer memory
> Slot in mechanism with blue LED display
> Fully programmable direct access keypad
> Single auto>cue/continuous play mode
> Seamless looping with reloop/stutter & loop editing
> Pitch bend via jog wheel or buttons
> Three time display modes
> Frame accurate search & cue
> Large blue backlit LCD display w/ dimmer control
> Coaxial RCA digital output
> Rubber jog wheel with finger grooves
> Variable pitch control with ranges of 4%, 8% , 16%, 100%
> Soft touch buttons with bright LEDs
Unit Dimensions: 8.5” x 3.75” x 12.5” (216 x 95 x 317.1mm)
Weight: 6.6 lbs. (3 kg)
Shipping: 10 lbs. (4.5 kg)
> Audio CD, CD-R, & CD-RW compatible
> 8 DSP effects: Filter, Zoom, Echo, Pan, Reverse, Trans, Brake & Scratch
> Precise Dry/Wet FX parameter, start & brake rotary controls
> 5 Fly cues & 4 sampler memory buttons
> Easy to operate memo button for cue function & sampling
> Vinyl/CD jog mode function
> Master cue has hot-start feature
> +10 track selection knob
> Key lock & BPM controls
> Anti-shock using RAM buffer memory
> Slot in mechanism with blue LED display
> Fully programmable direct access keypad
> Single auto-cue/continuous play mode
> Seamless looping with reloop/stutter & loop editing
> Pitch bend via jog wheel or buttons
> Three mode time selection
> Frame accurate search & cue
> Large blue backlit LCD display w/ dimmer control
> Coaxial RCA digital output
> Rubber jog wheel with finger grooves
> Variable pitch control with ranges of 4%, 8% , 16%, 100%
> Soft touch buttons with bright LEDs
Unit Dimensions: 8.5” x 3.75” x 12.5” (216 x 95 x 317.1mm)
Weight: 6.6 lbs. (3 kg)
Shipping: 10 lbs. (4.5 kg)
> CD-R compatible
> Anti-shock using RAM buffer memory
> Slot-In mechanism with blue LED illumination
> Fully programmable direct access keypad
> Single auto-cue/continuous play mode
> Seamless looping with reloop
> Pitch bend via jog wheel or buttons
> Three time display modes
> Frame accurate search
> Large blue backlit LCD display
> Coaxial RCA digital output
> Rubber jog wheel with finger grips
> Variable pitch control with ranges of 4%, 8% & 16%
Unit Dimensions: 8.5” x 3.75 x 12.5” (216 x 95 x 317mm)
Weight: 6.5 lbs. (3 kg)
Shipping: 8.2 lbs. (3.7 kg)
> CD-R compatible
> Instant-start
> Soft-opening door mechanism
> Single auto-cue/continuous play
> Looping with reloop
> Pitch bend buttons
> Three time display modes
> Frame accurate search
> Blue backlit LCD display
> Coaxial RCA digital output
> Variable pitch control with ranges of 4%, 8% & 16%
> Transparent window
Unit Dimensions: 8.5” x 3.75 x 12.5” (216 x 95 x 317mm)
Weight: 5 lbs. (2.3 kg)
Shipping: 7.4 lbs. (3.33 kg)
> CD-R compatible
> Mechanical anti-shock system
> Instant-start
> Single auto-cue/continuous play modes
> Three time display modes
> Frame accurate search
> LCD display
> Variable pitch control with range of ± 16%
> Transparent CD window
Unit Dimensions: 8.38” x 3.75” x 8.86” (213 x 95 x 225mm)
Weight: 4.5 lbs. (2 kg)
Shipping: 6.5 lbs. (3 kg)
> Audio CD and CD-R compatible
> Mechanical anti-shock system
> BPM counter tap button
> +10 song searching
> Instant-start & cue with preview
> Single auto-cue/continuous play modes
> Pitch bend via jog wheel or buttons
> Three time display modes
> Frame accurate search
> Large blue backlit LCD display
> Coaxial RCA digital output
> Rubber jog wheels with finger grooves
> Pitch control with a range of +/-16%
> 3.5mm line input on face
Unit Dimensions: 19” x 3.5” x 10” (482 x 88.5 x 254mm)
Weight: 9.9 lbs. (4.5 kg)
Shipping: 12.9 lbs. (5.8 kg)
> Composite Video Output for Karaoke Applications
> Audio CD, CD-R, and CDG compatible
> Mechanical anti-shock system
> BPM counter tap button
> +10 song searching
> Instant-start & cue with preview
> Single auto-cue/continuous play modes
> Pitch bend via jog wheel or buttons
> Three time display modes
> Frame accurate search
> Large blue backlit LCD display
> Rubber jog wheels with finger grooves
> Pitch control with a range of +/- 16%
Unit Dimensions: 19” x 3.5” x 10” (482 x 88.5 x 254mm)
Remote Control Dimensions: 19” x 3.5” x 2.75” (482 x 88 x 70mm)
Weight: 13.7 lbs. (6.2 kg) Remote Weight: 3.5 lbs. (1.5 kg)
Shipping: 21 lbs. (9.5 kg)
> Audio CD and CD-R compatible
> Mechanical anti-shock system
> BPM counter tap button
> +10 song searching
> Instant-start & cue with preview
> Single auto-cue/continuous play modes
> Pitch bend via jog wheel or buttons
> Three time display modes
> Frame accurate search
> Large blue backlit LCD display
> Rubber jog wheels with finger grooves
> Pitch control with a range of +/-16%
Unit Dimensions: 19” x 3.5” x 10” (482 x 88.5 x 254mm)
Remote Control Dimensions: 19” x 3.5” x 2.75” (482 x 88 x 70mm)
Weight: 13.7 lbs. (6.2 kg) Remote Weight: 3.5 lbs. (1.5 kg)
Shipping: 21 lbs. (9.5 kg)
> Audio CD and CD-R compatible
> Anti-shock using RAM buffer memory
> Instant-start & cue with preview
> Single/Continuous play modes
> Seamless loop per side with reloop
> Pitch bend via jog wheel or buttons
> Three time display modes
> Frame accurate search
> Large blue backlit LCD display
> Dual mode jog wheels for search or pitch bend
> Pitch control with range of +/- 12%
> Pitch bend buttons
> +10 track button for quick navigation
> Fully programmable with repeat function
Unit Dimensions: 19” x 3.5” x 10” (482 x 88.5 x 254mm)
Remote Control Dimensions:.19” x 3.5” x 2.75” (482 x 88 x 70mm)
Weight: 10.75 lbs. (4.8 kg)
Remote Weight: 3.5 lbs. (1.5 kg)
Shipping: 18.6 lbs. (8.4 kg)
> Audio CD & CD-R compatible
> Remote control w/ direct select
> Anti-Shock Protection using RAM buffer memory
> Instant-start & cue with preview
> Single/continuous play modes
> Seamless loop with reloop
> Pitch bend via jog wheel or buttons
> Three time display modes
> Frame accurate search
> Large blue backlit LCD display
> Dual mode jog wheel for search or pitch bend
> Pitch control with range of +/- 12%
> Pitch bend buttons
> +10 track button for quick navigation
> Fully programmable with repeat function
Unit Dimensions: 19” x 3.5” x 10” (451 x 88.5 x 254 mm)
Weight: 9.35 lbs. (4.2 kg)
Shipping: 13 lbs. (5.9 kg)
> Audio CD and CD-R compatible
> Anti-Shock using RAM buffer memory
> Instant-Start and Cue with preview
> Single/continuous play modes
> Fader-Start capability
> Seamless loop per side with reloop
> Pitch bend via jog wheel or buttons
> Three time display modes
> Frame accurate search
> Direct track access buttons
> Pitch control with range of +/- 12%
> +10 track button for quick navigation
> Fully programmable with repeat function
> 3-band EQ w/ Gain Control
> 1/4” headphone output
> XLR and 1/4” mic input
> Auxiliary Inputs for Phono or Line devices
Unit Dimensions: 19” x 3.5” x 10” (451 x 88.5 x 254mm)
Weight: 17 lbs. (7.6 kg)
Shipping: 20.7 lbs. (9.3 kg)
> Bright blue LCD display for FX names & FX parameters
> DSP module with 25 effects & a wide range of parameters
> FX assign switch
> Dry/Wet fader control
> Rotary FX selector & parameter controls
> Dual mode backlit FX on/off & cue effect button
> Mic section with rotary Mic volume, high, & low EQ controls
> Fader section with hamster/reverse, slope, & assign switches
Unit Dimensions: 10" x 3.3" x 10.25" (254 x 84 x 260mm)
Weight: 7.5 lbs. (3.4 kg)
Shipping:10.31 lbs. (4.7 kg)
7
PS Series
Professional 3-Channel Stereo Mixers
Standard Feature Set
> Removable face plate for user replaceable Rail Glide™ cross fader
> 3 band rotary EQ per line with cut feature & rotary gain channel control
> Lighted push button cue section
> Rotary zone & balance controls
> Dual VU display with bright LED & mode switch
> Master volume fader control
Front:
> 1/4” headphone output & Mic input
Unit Dimensions: 10" x 3.3" x 10.25" (254 x 84 x 260mm)
> Filter assign switch
> Dry/Wet & resonance fader control
> Rotary Q factor control
> 3 filter memo/recall buttons with LED
> Dual mode push button for tempo on/off & cue filter
> Push-button high pass, low pass, and band pass filters with
rotary tempo control
> Mic section with rotary Mic volume, high, & low EQ controls
> Fader section with hamster/reverse, slope, & assign switches
Weight: 7.5 lbs. (3.4 kg)
Shipping: 10.3 lbs. (4.66 kg)
Each PS Series mixer comes equipped with 6 line and 3 convertible
phono/line RCA inputs. In addition, the each mixer comes with
Master, Record, and Zone outputs. The front panel* of each mixer
features a 1/4” mic input with a 2-band EQ and level control,
Hamster, Fader Slope and Assign switches, and a cue control panel
with a 1/4” headphone output. *Excludes PS-01
> 8 line inputs, including 6 RCA inputs, 3 convertible phono/line and
2 from PC via USB
> Mix audio files of any format directly from computer (via USB) with
records and CDs
>
USB connectivity allows mixes to be recorded directly to a compatible
PC or Mac without any additional hardware
> Dual USB connectors
>
Both USB playback and recording function can be used simultaneously
> 3 band EQ kill switches with flash effect
> Mic section with rotary Mic volume, high, & low EQ controls
Fader section with hamster/reverse, slope, & assign switches
>
Weight: 5.87 lbs. (2.71 kg)
Shipping: 9.87 lbs. (4.51 kg)
The back panel of the PS-02USB features two channel-assignable USB
inputs, allowing DJs to mix music directly from their PC while
recording their mix directly to their PC. With full-duplex capability, the
PS-02 USB allows these operations to be performed simultaneously
without any extra software or hardware.
> 10” 2 channel stereo mixer
> 4 line, 2 convertible phono/line RCA inputs
> Dual ground screws for easy connectivity
> Master and record RCA outputs
Face :
> 3 band rotary EQ per channel
> Removable face plate for user replaceable Rail Glide™cross fader
> Ergonomically designed to be flush with turntable
> Smooth curved face plate
> Rotary gain channel control
Front:
> 1/4” Mic input & headphone output
Unit Dimensions: 10” x 3.3” x 10.25” (254 x 84 x 260mm)
*These features are not included in the PMX-01 model
Weight: 5.86 lbs. (2.66 kg)
Shipping: 8 lbs. (3.7 kg)
Removable Rail Glide™ cross fader comes standard on all PMX mixers except the PMX-01
9
Introducing the CS-02 Professional 5-Channel
Stereo Mixer, Gemini’s solution for the Club DJ.
The CS-02 features a wide array of premium features
such as a channel-assignable DSP Effects module
and an Auto-BPM feature with rotary tempo ratio
control. This new mixer also comes with an array
of inputs that you can assign to virtually any channel
you desire. With all this and more, the CS-02
stands as a club mixer solid enough for any DJ set
up.
> 5 Channels with pre-fader LED VU meters and 3-band rotary EQ
> 3 Mic, 10 Line, and 3 Phono/Line Convertible Inputs
> Master, Booth, Zone, and Record RCA outputs w/ Zone device
selection control
> 25 Channel-Assignable DSP effects with bright blue backlit LCD
display and 5-bank memory recall
> 6-Device Input routing matrix on each channel
> 30mm linear DSP parameter control
> Rotary Dry/Wet control
> Auto & Tap BPM counter with optional EFX tempo synchronization
> Face-mounted RCA Rec Output and Aux Input
> Dedicated faceplate-mounted 1/4” XLR combo mic input with 3-band
EQ and Auto-Talkover Function
> Master, Booth, and Zone outputs with independent rotary
volume controls
> XLR Master Balanced Output with master attenuation switch
> Balance control with Mono switch
> Push button Cue Section with CUE/PGM control & Split Cue function
> Large blue backlit EFX On/Off button with Cue EFX feature
> Replaceable faders with X-Fader Curve Control
> X-Fader assignment on each audio input channel
> Dual VU master meters
> 19” Rack ears included
Dimensions: 12.5 x 4.2 x 14 (318 x 107 x 356mm)
Weight: 12 lbs (5.44 Kgs)
Shipping: 13.54 lbs (6.14 Kgs)
The input assign switches allow for the assigning of inputs to any
channel, giving the user the freedom to personalize the way they
control their music.
The mic section features an XLR-1/4” combo input and 3-band
EQ with volume control and talkover function, top-mounted
for convenience.
The EFX assign buttons select the channel that the user wants to
affect with the selected DSP effect. LED-lit indicators let the user
know when this feature is switched ON or OFF.
X-Fader Assign switches give the user
control over whether the respective
channel is controlled via the A or B sides
of the crossfader. When in the OFF position,
the audio for the respective channel will
not be affected by the x-fader and go
straight to the master output.
The zone select switch lets the user choose which channel will go
through the ZONE output, which will send audio output to an
additional location. Volume control for this feature is also included.
In addition to the vast amount of inputs and outputs located on
the CS-02, additional top-mounted REC output and AUX Inputs
have been provided give easy access when the mixer is in an
enclosed space.
The tempo section controls
how the EFX sync with the
BPM of the current track. Simply
press the TEMPO ON button, and
the EFX will automatically sync
with the current track according to
the settings on the rotary control. The
EFX can also be synced up to a tempo
of the user’s choosing by tapping the
large LED-lit TAP button in time. The EFX
assign feature can also be utilized with the
mic output.
The recessed back panel of the CS-02 features
7 line and 3 phono/line convertible inputs, as
well as two 1/4” Mic Inputs. On the output
side, there are Master, Record, Booth, and
Zone Outputs as well as Balanced XLR Outputs.
The fully featured EFX section gives the user the power to
utilize 25 DSP effects with a wide range of parameters. The
module includes an LCD screen for switching between
effects, rotary Dry/Wet control, and a parameter fader. In
addition, 5 Memory Recall Banks have been provided to let
the user select previously programmed settings.
The PDM-02 features an echo control with repeat, delay, volume,
and speed rotary controls. This mixer also comes equipped
with 6 digital effects including Scratch, H2O, Applause,
Copter, Glass, and Scream. Each effect is assignable between
mic and master output.
GNL-700
15” Flexible Gooseneck Lamps
> Compatible with most products with a BNC 12-volt output
DJM-1
Professional DJ Microphone
> 18 ” in length
> Gooseneck for flexibility
> Unidirectional microphone
> 3 pin male XLR connector
Each PDM series mixer features 7 line, 1 mic, and 2
phono/line convertible RCA inputs as well as 2 1/4” Mic
inputs. In addition, each mixer comes equipped with
Master, Record, Booth, and Zone Outputs, and a 1/4”
Balanced Master output.
DJM-2
Professional Dynamic Stage
Microphone
> Dynamic cardioid
> Unidirectional
> Extra impact resistant
> Unbreakable bouncing head
> 18 feet / 6 meter cable
> Includes microphone stand attachment
system and a protective carrying case
The MM-04 comes with a built-in DSP effects module that features
25 effects with a wide range of parameters. Its bright blue LCD
screen makes this mixer ideal for even the darkest performance
settings.
Mixers
MM Series
Professional Multi Channel Stereo Mixers
Standard Feature Set:
> MM Series standard feature set
> 6 line, 3 mic, 2 convertible phono/line RCA inputs
> Master, record, & zone RCA outputs
> XLR balanced outputs
Face:
> 3 band rotary EQ per channel with cut feature
> DSP module with 25 effects & a wide range of parameters
> Dry/Wet fader control
> Rotary control FX selector
> Rotary parameter control
> Large backlit soft touch on/off FX button
> Assignable cross fader
> Rotary gain channel control
> Rotary master, zone, balance & cue volume controls
> XLR-1/4" combo Mic input
Weight: 8.95 lbs. (4.05 kg)
Shipping: 12.95 lbs (5.85 kg)
> MM Series standard feature set
> 7 line, 2 Mic, 2 convertible phono/line RCA inputs
> Master & record RCA outputs
Face:
> 5 band master graphic EQ
> XLR Mic input
Weight: 7.04 lbs. (3.19 kg)
Shipping: 9.4 lbs (4.2 kg)
13
DJ: Jay Tommy- Domestics, New Jersey
The iPod/Input switch will let the user add additional equipment
to their iPod mixing set up such as a CD Player or Turntable.
A simple flick of the switch will toggle between the iPod and
a connected device.
The mixing console features two angled docking stations which
function like a normal dock, allowing the user to charge their iPod
or edit their collection via USB connection. The angled
positioning also gives the user easy access to the iPod's controls
while mixing.
The iTrax Mixer Console brings on a new mode of
performance by providing a mixing platform for the
world’s favorite digital music player: The Apple
iPod®.
Angled docking stations let the user set two iPods
side-by-side with a fully featured mixing interface.
Extra inputs allow for the use of additional gear such
as CD Players and Turntables, and the iTrax also
comes equipped with composite video output for
use with the newest iPod innovation.
With its sleek design and superb functionality, the
iTrax transforms the iPod into a true performance
tool that will bring out the DJ in any iPod user.
> Dual docking stations for Apple
> USB port with dock switch allows library management via PC
> 2 Phono/Line convertible inputs for use with additional devices
> Composite video output for use with photo/video-enabled iPod
> 3-Band rotary EQ with gain and cut feature per channel
> 1/4” (6.35mm) Mic input with 2-Band EQ controls
> Master and Record RCA outputs
> Input selection switches
> Cue section with CH1/CH2 cue fader
> User replaceable X-Fader
> Lightweight, slimline design for complete portability
Unit Dimensions: 11.3” x 11.5” x 2.6” (287 x 292 x 66 mm)
Weight: 4 lbs. (1.8 kg)
Shipping: 6.2 lbs. (2.8 kg)
®
iPod®digital music players
®
®
The mixing console comes equipped with a 1/4” microphone
input with volume and 2-band EQ control.
The mixing console’s cue section lets the user set headphone volume
as well as choose what channel comes through the headphones for
effective monitoring.
> Super High Torque (2.2kg) direct drive turntable
> CPU controlled motor system
> +/-10% variable pitch slide control
> Solid aluminum platter with easy glide grooves
> Straight tone arm for superior tracking
> Tone arm height adjustment up to 6 mm with lock
> Fully adjustable counterweight and anti-skating controls
> LED illuminated soft touch start/stop & RPM buttons
> 33/45/78 RPM
> Push button quartz lock with LED
> Removable target light (not included)
> Removable headshell
> Felt slip mat included
> Detachable RCA & ground cables
Unit Dimensions: 17.75” x 3.25” x 13.9” (450 x 82 x 353mm)
Weight: 20 lbs. (9 kg)
Shipping: 25.3 lbs. (11.4 kg)
> Audio CD, CD-R, & CD-RW compatible
> Slot-loading CD mechanism
> Disc identification system for memorizing cue points
> Touch-sensitive jog wheel
> 3 fly cues & 2 eight second sampler banks
> 10 sec. Anti-shock™ protection using RAM
buffer memory
> Seamless loop with reloop & B-edit
> Key lock & BPM counter
> Pitch bend via jog wheel or buttons
> Variable pitch slide control with ranges of
4%, 8%, 16%, 100%
> Adjustable brake control & reverse
> +10 track selection
> Dual jog mode function
> Single auto-cue/continuous play modes
> Three time display modes
> Large red backlit LCD display
> Coaxial RCA digital output
> Sleep mode
Unit Dimensions: 8.5” x 3.75 x 12.5” (216 x 95 x 317mm)
Weight: 6.5 lbs. (3 kg)
Shipping: 9.4 lbs. (4.2 kg)
> CD-R compatible
> Anti-shock using RAM buffer memory
> Slot-In mechanism with red LED illumination
> Fully programmable direct access keypad
> Single auto-cue/continuous play mode
> Seamless looping with reloop
> Pitch bend via jog wheel or buttons
> Three mode time selection
> Frame accurate search
> Large red backlit LCD display
> Coaxial RCA digital output
> Rubber jog wheel with finger grooves
> Variable pitch control with ranges of 4%, 8% & 16%
Unit Dimensions: 8.5” x 3.75 x 12.5” (216 x 95 x 317mm)
Weight: 6.5 lbs. (3 kg)
Shipping: 8.2 lbs. (3.7 kg)
> 3 band rotary EQ with cut feature
> EQ Kill switches w/ Flash effect
> Removable face plate for user replaceable Rail Glide cross fader
> Ergonomically designed to be flush with turntable
> Smooth curved face plate
> Rotary gain channel control
> Dual VU display with bright red LEDs
> 2 band rotary Mic EQ & volume controls
Front:
> Hamster/reverse & cross fader curve control switches
> Rotary cue volume control & cue section fader allowing cue mix
> 1/4" Mic input & headphone output
Unit Dimensions: 10” x 3.3” x 10.25” (254 x 84 x 260mm)
Weight: 6.2 lbs. (2.81 kg)
Shipping: 8 lbs. (3.7 kg)
iSeries
The iSeries brings you a strikingly new and refreshing look for your
professional DJ setup. With their beautiful glossy white and chrome
finish and bright red LEDs, you can be sure that you’ll be spinning
up the club in style with Gemini’s iSeries gear.
> Ultimate High Torque (5.0kg) direct drive turntable
> CPU controlled magnetic platter motor system
> Adjustable +/-10% or 20% pitch button w/ LED
> Variable pitch slide control
> Convenient retractable start/brake delay rotary controls
> Solid Aluminum Platter with easy glide grooves and rubber damping
> Base with rubber for improved damping
> Straight tone arm for superior tracking
> Tone arm height finger groove adjustment up to 6 mm with lock
> Fully adjustable counter weight & anti-skating controls
> LED illuminated soft touch start/stop & RPM buttons
> 33/45/78 RPM
> Push button quartz lock and reverse w/ LED
> Removable ultra-bright LED target light
> Removable headshell
> Felt slip mat included
> Detachable RCA & ground cables
Unit Dimensions: 17.75” x 3.25” x13.9”
(450 x 82 x 353mm)
Weight: 20.1 lbs. (9.1 kg)
Shipping: 28 lbs. (12.6 kg)
Easy glide grooves built into the platter allow slipmats
to rotate smoothly while in use.
Easy glide grooves built into the platter allow
slipmats to rotate smoothly while in use.
> Super High Torque (2.2kg) direct drive turntable
> CPU controlled motor system
> +/-10% variable pitch slide control
> Solid Aluminum Platter with easy glide grooves
> Straight tone arm for superior tracking
> Tone arm height adjustment up to 6 mm with lock
> Fully adjustable counter weight & anti-skating controls
> LED illuminated soft touch start/stop & RPM buttons
> 33/45/78 RPM
> Push button quartz lock with LED
> Removable target light (not included)
\> Removable head shell
> Felt slip mat included
> Detachable RCA & ground cables
Unit Dimensions: 17.75” x 3.25” x 13.9” (450 x 82 x 353mm)
Weight: 20 lbs. (9 kg)
Shipping: 25.3 lbs. (11.4 kg)
> 2 stereo channels
> 2 phono/line convertible inputs
> Gain control for each channel
> Cue section
> Master, cue and mic volume rotary control
> Front panel 1/4" microphone and headphone jacks
> Dual ground screws for easy connectivity
> 2 stereo channels
> 2 phono/line convertible inputs
> Gain control for each channel
> Cue section
> Master, cue and mic volume rotary control
> Front panel 1/4" microphone and headphone jacks
> Dual ground screws for easy connectivity
DJC-01 Compact CD/Mixer Carrying Case
> Suitable for a 6.5" mixer & 2 CDJ-15X CD players
> Rugged 600 denier black polyester outer body
> Padded interior with dividers & foam inserts
> Fully detachable zippered cover
> Adjustable removable padded comfort shoulder strap
> Padded Velcro carrying handle
> Extra protective fastening straps
> Speakon connectors
> XLR & 1/4” balanced inputs
> Comprehensive 5 way protection circuitry
> Dual speed fan cooled
> Stable at 2 ohms
> Three modes of operation: stereo, mono parallel
and mono bridge
Unit Dimensions: 19” x 3.5” x 13.75” (483 x 89 x 350mm)
Weight: 34 lbs. (15.5 kg)
Shipping: 42 lbs. (19 kg)
Each GXA Series power amplifier features 1/4” TRS Balanced/Unbalanced inputs and XLR Inputs as well as 1/4” and Speakon™ outputs. Each amplifier also comes equipped with a dual-speed cooling
fan to prevent overheating during use.
> Stereo, parallel mono & bridge modes
> Ground lift switch for hum elimination
> Advanced protection circuitry
> 400 watts in bridge mode
> Balanced and unbalanced inputs
> Clip indicators
> Fan cooled
Unit Dimensions: 19” x 3.5” x 10.75” (483 x 89 x 273mm)
Weight: 17.8 lbs. (8.1 kg)
Shipping: 23 lbs. (10.4 kg)
Gemini’s GPA Series Power Amplifiers provide you with excellent value for a wide range of intermediate power applications. With its bi-polar output stage technology and comprehensive
protection circuitry to prevent overheating, the GPA Series gives you the high-end features you want in a product that is well within your budget.
Additional Specifications:
Total Harmonic Distortion..............................Less than 0.05%, typical 0.02% at 1 kHz
Signal to Noise Ratio.........................................100 dB below rated power @ 8 Ohms
Damping Factor..................................................................greater than 200 @ 8 Ohms
> Stereo, parallel mono & bridge modes
> Ground lift switch for hum elimination
> Advanced protection circuitry
> 180 watts in bridge mode
> Balanced and unbalanced inputs
> Clip indicators
> Fan cooled
Unit Dimensions: 19” x 3.5” x 11” (483 x 89 x 280mm)
Weight: 12.9 lbs. (5.85 kg)
Shipping: 18 lbs. (8.2 kg)
Each GPA Series power amplifier features 1/4”
TRS Balanced/Unbalanced inputs and XLR Inputs
as well as 1/4” and Speakon™ outputs. Each
amplifier also comes equipped with a high-airflow cooling fan that guides hot air from the
front of the unit to the back in order to prevent
overheating during use.
The back panel of the GX-450 speaker features
an array of connectivity options including two
mic inputs with 1/4” and balanced XLR jacks and
a line input with stereo RCA and balanced XLR
jacks, each with rotary level controls. In addition,
1/4” and balanced XLR line output jacks are also
provided along with level and 2-band EQ controls
for overall output.
20”
(510mm)
*All GX speakers come with brackets for stage monitoring applications.
The back panel of the GX-350 speaker features
an array of connectivity options including one
mic input with 1⁄4” and balanced XLR jacks and a
line input with stereo RCA and balanced balanced
XLR jacks, each with rotary level controls. In
addition, 1⁄4” and balanced XLR line output
jacks are also provided along with level and
2-band EQ controls for overall output.
*All GX Series speakers come with brackets for use in monitor
applications.
(except for GX-150 and GX-100)
19.29”
(489mm)
10.43”
(265mm)
14.7”
(373mm)
The back panel of the GX-150 speaker
comes equipped with XLR jacks for mic
and line inputs as well as a line output and
level control for overall volume.
> 8” Aluminum die-cast woofer with high temperature voice coil
> Compression driver with 1.25” titanium diaphragm
> Durable black ABS plastic molded shell & full metal grille
> 100w RMS, 250w peak power amplifier
> Frequency response: 65 Hz – 20 kHz
> Power & clip LEDs
> XLR Mic input with rotary volume control
> XLR and RCA Line inputs
> XLR Line output (for linking multiple speakers)
> Rotary Master volume control
> Stand mounting socket and rigging points
> Rubber feet and stacking grooves
Weight: 11 lbs. (4.9 kg)
Shipping: 13 lbs. (5.9 kg)
> 8” Aluminum die-cast woofer with high temperature voice coil
> Compression driver with 1.25” titanium diaphragm
> Durable black ABS plastic molded shell & full metal grille
> 100w RMS, 250w peak power handling
> Frequency response: 65 Hz – 20 kHz
> Speakon input and output (for linking multiple speakers)
> Stand mounting socket and rigging points
> Rubber feet and stacking grooves
Weight: 8 lbs. (3.7 kg)
Shipping: 10 lbs. (4.7 kg)
The back panel of the GX-250 speaker
features an array of connectivity options
including one mic input with 1⁄4” and
balanced XLR jacks and a line input with
stereo RCA and balanced balanced XLR
jacks, each with rotary level controls. In
addition, 1⁄4” and balanced XLR line output
jacks are also provided along with level
and 2-band EQ controls for overall output.
> 2 XTR-SAT 10” Trapezoidal loudspeakers & 15” powered subwoofer
> Efficient MDF Bandpass subwoofer enclosure w/ 35mm Standmount cap and wheels
> 3-channel power amplifier & active crossover built-in to subwoofer
> 230 watts RMS on subwoofer channel (Subwoofer Freq. Response: 100Hz to 20 kHz)
> 85 watts RMS per satellite channel (Satellite Freq. Response: 35Hz to 100Hz)
> 400 watts total RMS and 800 watts peak power
> 120dB total continuous SPL
> Individual channel Sensitivity/Volume controls
> Balanced XLR and 1/4” inputs
> Speakon™ outputs for satellite channels (Cables Included)
> Variable speed fan
> Full protective metal grill
> Hard wearing black painted finish with
rubber feet
> Speaker stands not included
Weight: 112 lbs. (51 kg)
Shipping: 119 lbs. (54 kg)
18”
(457mm)
16”
(406mm)
24”
(610mm)
XTR-500 Amplifier
*All GSM and GT Series speakers come standard with metal corners and rubber feet.
*All GSM and GT speakers come with easy-carry handles except for the GT-1002.
> 90 watts RMS Trapezoid Speaker
> High temperature voice coil
> 6” x 3” Dual super piezo horn
> 1/4” input jack
> 8 ohms impedance
> Stand mounting cup
> ZM-128 handheld unidirectional dynamic microphone with rechargeable
battery input
> ZB-128 belt pack transmitter with Mic/line switch, HSM-X4 electret
condenser headset Mic with mini XLR, & rechargeable battery input
> ZB-128 belt pack transmitter with Mic/line switch, LAV-X4 electret
condenser Mic with mini XLR, & rechargeable battery input
Features:
> Metal adaptor included for 19” rack mounting
> 2 units can be mounted side by side in a 19” rack
> Up to 20-25 hours battery life using alkaline batteries
> Balanced & unbalanced outputs
> 128 band UHF synthesizer controlled frequencies
> Phase locked loop (PLL) circuitry
> LCD display screen
> RF & AF LED meters
> Squelch control
> Super high sensitivity with
extremely low noise transmission
& reception
> Stable & quality SMT assembled
PCB module
Range: up to 400'
Frequency Range
Europe: 840
- USA: 740 - 770MHz
- 870MHz
The UZ Series allows up to 10 channels to be used simultaneously with multiple systems.
UF Series Microphones come with
color coated end caps for easy
channel identification. They also
feature a battery charging input
for convenience.
*Rechargeable batteries must be used to
take advantage of rechargeable functionality.
Attempting to recharge non-rechargeable
batteries may result in damage to the unit.
HSM-X3
FM-64
Mini XLR input
Wireless Systems
UF Series
Professional 64 Channel UHF PLL
Wireless Systems Standard Feature Set:
> FM-64 handheld unidirectional dynamic microphone with
rechargeable battery input
> FB-64 belt pack transmitter with Mic/line switch, HSM-X3 electret
condenser headset Mic with mini XLR, & rechargeable battery input
> FB-64 belt pack transmitter with Mic/line switch, LAV-X3 electret
condenser Mic with mini XLR
Additional features:
> Up to 20-25 hours battery life using alkaline batteries
> Metal adaptor included for 19” rack mounting
> 2 units can be mounted side by side in a 19” rack
UZ Series Accessories
LAV-X4
HSM-X4
*Rack mounting brackets
Soft moveable antennas
DC output for recharging both the FB-64
Belt Pack and FM-64 Handheld
Microphone
RF signal indicators
Low profile channel selectors
LAV-X3
FB-64
The UF Series allows up to 6 channels to be used simultaneously with multiple systems.
UF-2064, UF-1264 and UF-1064 shown in both a single rack mount and double rack mount.
> VH-101 single channel receiver
> One transmitter
> 8 different factory preset frequencies
> Adjustable output level control
> Auto mute circuitry
> RF signal indicator
Range 150'
Frequency Range: 174.60 MHz to 204.60 MHz
> Dual slide out rack lights
> Power surge protection
> 8 AC outlets (available in 110V and 230V )
> LED Line Voltage Display
> Dimmer control
> 15 Amp
Unit Dimensions: 19” x 1.75” x 6.5” (483 x 45 x 229mm)
Weight: 5.5 lbs. (2.5 kg
Shipping: 7.6 lbs. (3.4 kg)
Unit Dimensions: 19” x 1.75” x 9.75” (483 x 45 x 248mm)
Weight: 8 lbs. (3.6 kg)
Shipping: 9 lbs. (4.1 kg)
PA-7000
Preamplifier
..............................
> Pre amplifier with volume control, 3 band equalizer
> 4 inputs + 1/4” mic input with level control
> Mute, low cut and loudness feature
> Stereo RCA inputs, XLR outputs
Unit Dimensions: 19” x 1.75” x 9.75” (483 x 45 x 248mm)
Weight: 8.2 lbs. (3.7kg)
Shipping: 9 lbs. (4kg)
> Ideal for DJ monitoring
> Suitable for portable CD or MP3 players
> Warm clear natural tones with a rich bass sound
> Adjustable headband w/ 180° cushioned swivel ear pads
> Lightweight body for easy carrying
> Gold plated 3.5mm connector with straight 1/4”(6.5mm) adaptor
> 4.5 ft (1.4m) cable
Shipping: 2 lbs. (0.9 kg)
MRC 16
22.5” (571.5mm)
37.75” (858mm)
20.75” (527mm)
66 lbs. (30kg)
67 lbs. (30.3kg)
*Compact folding design
DJ: Obi Wan - Philadelphia, PA
Worldwide Offices
USA:
Gemini Sound Products Corp.
Worldwide Headquarters
120 Clover Place
Edison, New Jersey 08837
Ph: 1.732.738.9003
Fax: 1.732.738.9006
Gemini stands behind their product line with a 1-year Limited Warranty.
For larger images and detailed specs visit our website at http://www.geminidj.com
GEMINI IS NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS OR OMISSIONS.