AlarmDock Prem UI V1.9
Revisions
Date Version Changes
24/2/11 V1.1 Default Mode when switched on
Dim levels
Volume
Snooze included
2/3/11 V1.2 Remote
8/3/11 V1.3 Rotary click dened
Brightness settings changed
11/4/11 V1.4 Sub Tree dened
Presets
Feedback loop
14/5/11 V1.5 Removed remote functionality
Added BT connection model
27/5/11 V1.6 Button Layout
20/6/11 V1.7 Included ‘escape’ button during settings
Factory Reset
Dened features that be used during Standby
Tones for BT memory clear
Changed AlarmDock to HouseParty during BT pairing
FM Scanning Display on long press
24/6/11 V1.8 Escape button removed
FM mode: clock display shows after 5s
Manual ON - Mode remains as previous
Auto On - Goes to iPod mode
Docking when speaker is ON
Connection time dened for docking with BT connected
Menu Tree Structure - Removed
Saving presets revised
Cycling presets revised
Setting Alarms and Times revised
Sleep timer revised
App Interaction with Speaker
Feedback loop alarms - removed
8/8/11 V1.9 Alarm Button display when alarms are already activated
Alarm settings accessible both when speaker is ON and
Standby
Alarm button functions when unit is ON and Standby
Page 2 of 24
AlarmDock Prem UI V1.9
Rotary Button
(One audio/physical click per incremental step of selection)
1 click 1 click
Page 3 of 24
AlarmDock Prem UI V1.9
On and Standby/O Mode
Display sequence for when speaker is turned on/o manually
Buttons Used:
Power button
Auto On Behaviour
If an iPod/iPhone is docked during Standby mode (speaker) - Speaker will turn on and enter iPod mode
Docking iPod when speaker is on:
Mode remains the same
Factory Reset
Accessible when speaker is ON or Standby
Buttons Used:
Power button
To restore to factory settings, press and hold the power button (Very long press 20s)
When the time has elapsed, there will be a bleep. When the factory reset is complete, the device will reset.
The following settings will be removed :-
* Time - reset to Midnight in 12hour mode.
* Alarm 1 - removed
* Alarm 2 - removed
* Paired devices and associated serial number list
* Local name
* Timeouts
* Connection mode
* FM Presets
* Last paired device
Brightness level: 7/7
‘Off’ will display for 2 seconds
Brightness level:1/7
‘’ON’ will display for 2 seconds
Brightness Level: 7/7
N.B. Any buttons pressed within the 2 seconds of ‘ON’ showing
will have normal functionality and override the ‘ON’ displayed.
Short Press ‘Power’
Button
Short Press ‘Power’
Button
Speaker activates previous mode prior to speaker switching o.
(iPod mode (Paused State), FM, Aux)
Page 4 of 24
AlarmDock Prem UI V1.9
Modes
How to change modes and order of sequence
Only accessible when speaker is ON
Buttons Used:
Mode
iPod Mode
AUX mode
FM Mode
Press ‘Mode’ (short/long press)
Press ‘Mode’ (short/long press)
Press ‘Mode’ (short/long press)
Default display when in iPod mode
Default display when in FM mode
Default display when in AUX mode:
Display changes back to
clock display after timeout
(5s)
Page 5 of 24
AlarmDock Prem UI V1.9
Transport Buttons
iPod Mode
Short press
Skips to prev track
Skips to next track
Play/pauses track
Long press
Rewinds current track by 10 seconds per second
F.Forward current track by 10 seconds per second
FM Mode
Short Press
Decreases FM frequency by 0.1
Increases FM frequency by 0.1
Cycles through presets
Long Press
Scans up to next strong frequency
(Display will show the frequency scanning up to the next strong channel. At the tuned freq, display will show the radio frequency for 1s,
then continue scanning for the next station if the button is still held)
During Mode settings (setting time, alarms)
Short Press
Replicates one rotary button click
Long Press
Replicates rotary button action when turned fast
Page 6 of 24
AlarmDock Prem UI V1.9
Volume (Only accessible when speaker is in ON mode)
Turning the rotary button will bring up the volume display (This will only occur if the speaker is not
currently in any setup processes, e.g setting alarms, time, mode)
Volume level: 0 - 40
Clockwise turn: Volume UP
Anti Clockwise turn: Volume DOWN
Turning the button slow: volume will increase/decrease
Turning button fast: volume will move in 5 step intervals
Display will go back to the Default Mode Display 3 seconds after the volume button is released.
Dim button (Accessible when speaker is ON or Standby)
Press the dim button (short/long press) to cycle through brightness settings
Level 7 - Full brightness
Level 0 - O
Page 7 of 24
AlarmDock Prem UI V1.9
Time Setting (only available when speaker is on Standby)
Display sequence for setting the time
Buttons Used:
Set Button Press
Set Button - Rotary Function
Use rotary button to scroll
between 12h and 24h
(Track skip buttons can
also be used instead of rotary button)
No Activity for 5s
Hour digits will begin to flash instantly
Minute digits will begin to flash instantly
Turn rotary button to change minutes
Turn rotary button to change hour digit
(if 12h was set - digits will cycle from 01-12 with AM
then 01-12 with PM showing)
(if 24h was set - digits will cycle from 00-23)
Mo will begin to flash
Use the rotary button
to scroll through the days
Returns to Mode Display with new time/day
No Activity for 5s
Returns to previous mode
Exits Sequence
Set Button pressed (Short/Long press)
Set Button or ‘Alram’ pressed (Short/Long press)
Set Button or ‘Alram’ pressed (Short/Long press)
Set Button or ‘Alram’ pressed (Short/Long press)
Set Button or ‘Alarm’ pressed (Short/Long press)
Track skip buttons can
also be used instead of rotary button)
track skip buttons can
also be used instead of rotary button)
track skip buttons can
also be used instead of rotary button)
12h will begin to flash instantly
0.5s 0.5s off
Page 8 of 24
Loading...