GE ZGU122NPSS, ZGU122LPSS User Manual

ZGU122NPSS - Natural Gas Built-in Dual-Burner Cooktop

10-7/8"

24-1/2"

11-7/8"

Gas and Electrical Locations

Outdoor
Cooktop
ZGU122

ZGU122LPSS - LP Gas Built-in Dual-Burner Cooktop

Dimensions and Installation Information (in inches)

Outdoor Built-in Cooktop

12" Min. to

Combustibles

on All Sides

28" to Front of Bullnose

10-1/2" to
the Bottom
of the Side

Support Flange

11"

26-1/2"

13"

7/8" Overlap
at the back

*25" Countertop Depth

26-1/2" to Front
of Control Panel

These cooktops are designed to be installed into a
non-combustible enclousure.

• The cooktop drops into the opening and hangs
from the side flanges. It does not require support
from the bottom.

• The cutout must be completely covered with
non-combustible material such as stone, brick,
ceramic tile, concrete board, etc. The countertop
surface and edges must be flat and level.

• If the countertop has an overhang, it must be
notched or cut back flush with the front face of
the cabinet below. See notched detail below.

• Allow 12" minimum clearance on both sides
and the back of the grill to adjacent vertical
combustible construction.

• These gas cooktops cannot be used below any
type of overhead construction.

• These cooktops are designed for outdoor use only.
Do not locate the cooktop in a building, garage or
other enclosed or semi-enclosed area.

• Locate the backside of the cooktop away from
prevailing winds and avoid cooking in windy
conditions.

For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,

800.626.2000.

Specification Created 10/08

170135

ZGU122NPSS - Natural Gas Built-in Dual-Burner Cooktop
ZGU122LPSS - LP Gas Built-in Dual-Burner Cooktop

Features and Benefits

• A pair of 15,000-BTU sealed side burners offers
additional space for preparing pasta or boiling water

• The burner grates are uniquely contoured on one
side to hold woks

• Stainless steel cooktop burner cover

• Electronic, 120-volt ignition system makes grill
activation as simple as pressing a knob control

• High-altitude conversion kit allows the grill to
maintain gas efficiency in mountaintop locations
WB28X10119

• Model ZGU122NPSS - Naural gas

• Model ZGU122LPSS - Liquid propane

Monogram grills are factory-set for Natural or LP gas
operation. Be sure to order the correct model for the
installation situation.

Conversion kits (WB28X10116 - LP to Natural gas and
WB28X10117 - Natural gas to LP) are available if the
wrong fuel type is ordered.

High altitude kit (WB28X10119) is also available for
operation above 2,000 feet. Order WB28X10118
to change the connection from LP portable (20 lb.
tank) to whole house stationary tank or to change a
stationary tank to portable.

For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,

800.626.2000.

Conversion kits must be installed by a qualified
service technician at additional cost. Order these kits
from your Monogram supplier.

Specification Created 10/08

170135