GE WA861OS, WA5600S, WA5710S, WA3650S Use And Care Manual

Washer
Safe~
instructions ....................3, 4
m
Operating Instructions, Tips
Bleach Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10
Control Settings .............................................7
Cycle Descriptions .........................................5
Cycle Times
.....................................................8
Energy-Saving Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Filter
Flo
Pan
......:.......................8,
10, 14,23
Operating the Washer ...........................6- 10
Suggested Fabric and Cycle Settings .......9
Care and Cleaning
Agitator
..........................................................2
1
.@
Storage and Vacation Tips ........................21
User Maintenance Instructions ...............21
Problem
Solver.......................l7-2l
More questions
?...call
GE Answer Centera 80~626.2000
Preparation
Detergents and Additives ..................13, 14
Hard Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..........13
Loading the Washer ...............................8, 12
Sorting
Clothes........................................8,
11
Stains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
15
Stain Removal Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Consumer Services ..................23
Appliance Registration .................................2
Important Phone Numbers .......................23
Model and Serial Numbers ..........................2
Repair Service
.................................................2
Warran~........................................Back Cover
Models: WA861OS
WA5600S
WA5710S
WA3650S
GE Appliances
HELP US HELP YOU...
Read this book carefully.
It is intended to help you operate and maintain your new washer properly.
Keep it handy for answers to your questions.
If you don’t understand something or need more help, write (include your phone number)
Consumer Affairs GE Appliances, Appliance Park Louisville, KY 40225
Save time and money.
Before you request service . . . check the Problem Solver section. It lists causes of minor operating problems that you can correct yourself.
If you received a
damaged washer...
Immediately contact the dealer (or builder) that sold you the washer.
To obtain a Spanish language
Para obtener la
versi6n
en
version of this book, call
espafiol
de
este
manual, name a
GE Answer
Center@
GE Answer Center”,
servicio
de
800.626.2000
information
para el consumidor,
consumer information service.
te16fono
800.626.2000.
Write down the model and serial numbers.
You’ll find them on a label on the lower left side near the front.
These numbers are also on the Consumer Product Ownership Registration Card that came with your washer. Before sending in this card, please write these numbers here:
Model Number
Serial Number
Use these numbers in any correspondence or service calls concerning your washer.
WA~ING: For your safety the information in this
ruanuai
must be
foMowed
to
rninimim
the risk of fire or explosion or to prevent property damage, person@
injury
or loss of life.
—Do not store or
use
gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
—W~T
TO DO ~ YOU
S~LL
GAS
Do not try to
tight
any
apptiance.
s
Do not touch any electrical switch;
do not me any phone in your
btiding.
Clear the room, building or area of
all
occupants,
s
Mediately cd your gas supplier from a
neighbor’s phone.
FOMOW
the gas
supptier’s
instructions.
. E you
cannot
reach your gas supplier,
M
the fire department.
—htilation
and service must be performed by a qualified instier, service agency or the gas supplier.
All washing instruction terms in this book conform to the Care Labeling Rule established by the Federal Trade Commission, January 1984.
If You Need Service
To obtain service, see the Consumer Services page in the back of this book.
We’re proud of our service and want you to be pleased. If for some reason you are not happy with the service you receive, here are three steps to follow for further help.
2
First, contact the people who
FINALLY, if your problem
serviced your appliance. Explain
is still not resolved, write:
why you are not pleased. In most
Major Appliance Consumer
cases, this will solve the problem.
Action Panel
NEXT, if you are still not pleased, 20 North
Wacker
Drive write all the details—including Chicago, IL 60606 your phone number—to:
Manager, Consumer Relations GE Appliances, Appliance Park Louisville, KY 40225
A
WARNING—TO reduce the risk of fire, electric shock, or injury to persons when using your appliance,
fo~ow
basic precautions, including the following:
Use this appliance only for its intended purpose
as described in this Use and Care Book.
o
This washer must be properly
‘Q.,%:$
~m+ ,+
installed and located in accordance
with the Installation Instructions before it is used. If you did not receive an Installation Instructions sheet with your washer, you can obtain one by calling, toll free, the GE Answer
Center!
800.626.2000.
—Properly ground to conform with all
governing codes and ordinances. Follow details in Installation Instructions.
—Install or store where it will not be exposed
to temperatures below freezing or exposed to the weather.
—Connect to a properly rated, protected and sized
power supply circuit to avoid electrical overload.
<onnect
to adequate plumbing and drain facilities as described in the Installation Instructions.
Turn off water faucets when the washer is not in
use to relieve pressure on hoses and valves, and to minimize leakage if a hose or valve should break or rupture.
w
When disconnecting this appliance
~
pull by the plug rather than the cord to
avoid damage to the cord or junction of
cord and plug. Make sure that the cord is located so that it will not be stepped on, tripped over or otherwise subjected to damage or stress,
c
Do not repair or replace any part
of the appliance or attempt any servicing unless specifically
recommended in this Use and Care Book or
in published user-repair instructions that you understand and have the skills to carry out.
To minimize the possibility of injury:
&
*
Do not mix chlorine bleach with
ammonia or acids such as vinegar
andor
rust remover. Mixing
can
produce a
Mcn
toxic
gas
which may cause
deati.
4
‘~
h
Do not wash or dry articles that
fl
have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances
(such as wax, paint, gasoline,
degreasers, dry-
cleaning
solven~,
kerosene, etc.) which may ignite or explode. Do not add these substances to the wash water. Do not use these substances around your washer
andor
dryer during
operation.
A
WARN~G—HYDROGEN
GAS
is produced by the chemical action
within your water heater and the gas
can accumulate in the water heater
andor
water pipes if hot water has not been used for a period of two weeks or longer. HYDROGEN GAS CAN BE EXPLOSIVE UNDER THESE CIRCUMSTANCES. So to prevent the possibility of damage or injury, if you have not used hot water for two weeks or more, or move into a residence in which the hot water system may not have been used for some time, turn on all hot water faucets and
aBow
them to run for
several minutes before using any electrical
appliance which is connected to the hot water system. This will allow any hydrogen gas to escape. Since the gas is flammable, do not smoke or use an open flame or appliance during this process.
Never reach into washer while it is
moving. Before loading, unloading or adding clothes, push in the Cycle
Selector knob to OFF position, then wait until the machine has completely stopped before opening the lid.
Close
supervision is necessary if this appliance is used by or near children.
Do not
allow children to play inside, on, or with this appliance or any discarded
appliance. Dispose of discarded appliances and shipping or packing materials properly. Before discarding a washer, or removing from service, remove the washer lid.
(continued next page)
3
WORTANT
SAFEH WSTRUCmONS
(continued)
m
Keep all laundry aids (such as
detergents, bleaches, fabric softeners,
‘ etc.) out of
the
reach of children,
m
preferably in a locked cabinet. Observe all warnings on container labels to avoid personal injury.
a
Keep the area around and underneath
your appliances free from the accumulation of combustible materials,
- “,
such as lint, paper, rags, chemicals, etc.
Q
Keep the floor around your appliances clean and
dry to reduce the possibility of slipping.
To minimize the possibility of electric
Z
shock, unplug this appliance from the power supply before attempting any maintenance or cleaning (except the removal and cleaning of the lint filter).
*
NOTE: Turning the Cycle Selector
~
knob to an 0~ position does NOT
/
disconnect the appliance from the power supply,
Do not
timper tith
controls.
Do not operate this appliance if it is damaged,
malfunctioning, partially disassembled, or has missing
or
broken parts, including a damaged
cord or
plug.
Never climb on or stand on the washer top.
Do not wash fiberglass articles in your washer.
Skin irritation could result from the remaining particles that may be picked up by clothing during subsequent washer use.
The laundry process can reduce
~ ‘~
~eflmeretmdmcy of
fab~cs.
h
~ / Toavoidsucharesult, thegarment
manufacturer’s care instructions should be followed very carefully.
For
wmher
operation
Do
not leave washer lid up during cycle. This will stop the wash and spin action and prevent completion of the cycle.
SAVE
T~SE
mSTRUCTIONS
Regular
Cycles—
Permanent Press
Cycles—
For most cottons, linens, work and play clothes.
For loads of synthetics, blends and/or delicate fabrics. Longer wash times plus deep rinse, spray rinse A cold water cool down helps prevent set-in wrinkles and spin provide thorough washing and detergent in permanent press shirts, blouses, dresses and similar removal.
apparel with normal soil.
Handwash System—
Spotscrubber System—
Saves time and energy when washing small loads The Spotscrubber cycle uses a special wash cycle and
of lightly soiled clothes. A special agitator concealed a highly concentrated detergent solution in a small
under the
regular agitator
washes small and delicate amount of water in the Mini-Basket tub.
loads gently-but
ef&ctively.
The Handwash System
Rinse water carries away soils and detergent suds and
uses up to 2470 less water than the regular
low
water
level selection.
automatic extra rinse assures complete removal of detergent.
I
I
Optional Extra Rinse
Cycl+
PreWash
Cycl+
The option of an extra rinse helps assure complete
For use when clothes are excessively soiled.
bleach and detergent removal when extra detergent
Provides an agitated soak, and a soak without
was used or where unusual skin sensitivity to
agitation, followed by agitation and spin. Washer
detergent is a concern.
must be reset for desired wash cycle.
Knits
Cycle—
Extra Cleaning
Cycle—
r
A shorter
cycle
specially-designed for today’s knits.
For modern fabrics with heavy or oily
soil.
Agitation
An early and long spray rinse cools down fabrics
for a
long
time, loosens stubborn soils. before the washer reaches maximum spin speed to help prevent wrinkle setting.
I
Soak
Cycle—
Auto Soak
Cycl%
Clothes activate in a soaking agent for a short time,
This will add additional wash time on cycles to allow
then the water spins out. Washer turns off at end of
the detergent to break down excessive soils. After the
Soak Cycle—must be reset for desired wash cycle.
Auto Soak is complete, it will automatically move through the selected cycle.
Delicate
CyclH
Washable Woolens
Cycle—
For lingerie and fabrics requiring special care, this
This cycle helps to reduce the need to wash these
cycle has a gentle wash and a slow spin.
fabrics by hand.
I
Washable Silks
Cycle—
Mini-Basket
System—
For fine washable silks. Check manufacturers’ care
Uses the Mini-Basket feature. Provides a complete
labels for special instructions
wash, rinse and spin cycle.
HOW TO OPERATE YOUR
CLOTmS
WASHER
Features and appearances may vary slightly
WARNING—To reduce the risk of fire, electric shock, or injury to persons when using your
appliance, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
WWA8610s
@
F;v.C,c,eW,sher
Regular
@
~
=RMPRESS
Permanent Press
KNITS
&
Kn;ts
0 COo, o.m
“,.s,
0
LIGHT SOIL
HEAW
NORMAL
WWA5600S
\
f ~ERMpRE~~
Regular
F
Permanent Press
M;o
‘“’’’mmm:m:’’:m:.
( ‘“”-”
.*KN;’
‘Knits
COLD
WARM
\@)
4
Load
S;ze
fl~~~
Temp
LIGHT
sOIL
HEAVY
M08MAL
J
S;x Cvcle Washer
e
9
0
,“,,,,0,,0,.,,,
,,s”,0s,0,
HeavVDutVLarge
Capac;~
b=’w”s””
6
—.
WWA3650S
Setting the Controls —
Controls and features will vary from model to model
Use the Suggested Fabric and Cycle Settings guide
~
Select
Was~inse
Temperature.
to help you make the proper selections.
~
Select Wash Spin Speed.
@ fish
Cycle Selector knob in
and turn clockwisetc
your selected wash setting.
~
Select Water Level.
~ fill Cycle
Selector knob
~
START
SMALL: Washer is less than 1/3
full
of clothes.
out to
stirt
the washer.
If
MEDIUM: Between 1/3 and 1/2 full.
you wish to change setting after washer has started, push
LARGE: Between 1/2 and 2/3 full.
Cycle Selector knob into stop
9
(i
STOP
~
EXTRA LARGE: Over 2/3 full.
the washer and reset to the new position. Setting can be changed at any time.
7
OPEMT~G
~STRUCTIONS
(continued)
Sorting and Loading
(*on models so equipped)
Sort clothes carefully by fabric type, weight, color
and amount of soil, according to instructions in How to Sort Clothes section.
. *Remove the
Filter-Flo@
pan.
The underside of the
lid
is a good place to put the pan while loading or unloading clothes.
Add measured amount of detergent. See Detergents
section for information on detergents and other laundry additives.
Load clothes into wash basket, being careful not
to overload. See How to Load Your Washer section.
. *Position the
Filter-Flo
pan on the agitator. Lint
will
collect in the pan for easy removal when the wash is finished. See How to Use the
Filter-Flo
Pan section.
Do not use the
Filter-F1o
pan as a wash
basket. Do not put any items to be washed in
the
Filter-Flo
pan.
See Bleach section for instructions in their uses
(on models so equipped).
s
For information on how to
use
bleaches and fabric
softeners, see Other Laundry Products section.
Close the lid. Washer will fill but not agitate or spin
with the lid open.
Cycle Times —
Total Cycle Times (Approximate Minutes)
NOTES:
Total time includes pauses between each phase of the cycle.
Total time does
not
include water fill times. Fill times vary
depending on household water pressure and your selected water level.
Perm Press & Knits Regular
J
WWA861O
25 37
I
Perm Press& Knits I Regular
I
I
WWA571O
25
37
Perm Press & Knits
Regular
Soak
WWA5600
25 37
12
m
)
WWA36S0
28
8
Cycle Suggested
Permanent Press & Knits
Delicates
Regul~
Extra Cleaning & Auto Soak
Special Instructions
*DOWn-filled
garments
**Pillows
***Blankets
For Clothes
Loa~abrics
such as:
Synthetics
Permanent press, treated cottons,
blends with cottons
c
Down-filled garments, if machine
washing is recommended*
Pillows**
Baby clothes (delicate)
Lingerie
Cottons and linens
c
Denims
Blankets***
Baby clothes (sturdy)
Work clothes with heavy soil
WasMSpin
Speed
Normal/Slow
Gentle/Slow
Gentle/Slow
Normal/Fast
Normal/Fast
Wash frequently to fluff up the down and retain the garment’s warmth. WASH SEPARATELY. Wet down gives off an odor which may be absorbed by other garments. Odor disappears when garment is dry. Treat heavily soiled areas with liquid detergent or a paste made of water and powdered detergent. Close zippers. Wash 2 or 3 garments at a time or add towels to balance. GARMENT MUST BE TUMBLE DRIED.
Pillows are made of different
materials–dacron,
foam, polyester, natural feather, and down. MANUFACTURER. S CARE LABELS MUST BE FOLLOWED CAREFULLY. If washing is recommended, check pillows for weak seams or holes and mend, to prevent escape of the filling.
Fill
washer, add detergent and agitate for several minutes. Add two pillows at a time to balance load. Use largest water level.
Fill washer with water; add detergent and allow to dissolve. Add blanket. WASH ONLY ONE BLANKET AT A TIME. On electric blanket, sew a strong piece of cloth over plug to protect blanket and washer from damage. Pre-treat heavily soiled spots with liquid detergent.
9
d
,
OPERAT~G ~STRUCTIONS
(continued)
H
OW
to Use the Bleach Dispenser
(on models so equipped)
Use this dispenser with
Measure bleach carefully.
liquid bleach only. If you prefer to
/
Pour measured amount of liquid bleach directly
use powdered
d..
into bleach dispenser.
bleach, pour it into the wash basket along with your detergent. Do
%%
Do not overfill or allow dispenser to overflow.
Avoid splashing. Undiluted bleach can cause fabric damage.
Never pour undiluted liquid bleach directly
not pour powdered bleach
onto clothes or into the wash basket.
into the bleach dispenser.
H
OW
to Use the Filter-Flo Pan
(on models so equipped)
The Filter-Flo pan is the lint filter.
Position the Filter-Flo pan on the agitator after loading clothes into the washer. Lint is easily seen and removed after the wash is finished.
a
NOTE: Do not use the Filter-Flo pan as a wash
. . .
.
,..
p
~.’’;:;:,,.
basket. Do not put items to be washed in the
,.,..:.
<.:
.,/ .,,:, ,.,...
1~11 {!:j;,$i
Filter-Flo pan. Do not place detergent packets
,:,.
..
.,!,.,
,, :.:.::.,,
in the Filter-Flo pan.
H
OW
to
Use the Soak
Cycle
(on models so equipped)
Soak: Turn the Cycle Selector knob to soak. Start
NOTE: For an extended soak,
allow
the washer the washer. Add pre-measured detergent or soak to fill and agitate for a few minutes to dissolve the product; add clothes.
soaking agent. Then push in the Cycle Selector knob
to stop the washer (keep lid closed) and allow to
soak for as long as desired. After desired soak period, pull out the Cycle Selector knob to complete the cycle.
ENERGY-SAV~G
TPS
If your clothes and household items don’t look
clean
Always
rinse in cold water. The temperature
and fresh after washing, you will probably rewash
of the rinse does not affect cleaning.
them.. and that means you’ll waste energy. Remember to sort your clothes carefully, and load
Wash in off-peak utility hours. Your local utility
them properly, select correct cycles, use enough
can tell you which are the off-peak hours.
detergent and
choose u water
temperature warm
Use your washer’s Normal Spin. This will remove
enough
to re[ea.se
and get rid
c?f
~oil.
more water during spin, which will shorten drying
Try to wash less often. Save articles of the same
cycle to save more energy.
type of fabric until you have a
full
load.
If you must wash smaller loads, adjust the amount
of water.
Small
loads should have lower water levels.
10
Sort by Surface Texture
Separate
LINT PRODUCERS—such as terry toweling and chenille—give up lint.
LINT COLLECTORS—such as man-made fibers and napped fabrics like velveteen and corduroy—attract lint. These must be washed separately.
For more information on lint control, see The Problem Solver section.
Sort by Fabric
Separate
1
%
Cottons &
a
‘~
Linens
from
:Dcottons &
L
A
nen’n
.
% Perm
Press
0
%
Synthetics &
a
% Dellcates
0
from
%wPoly
Knits
from
%L
Blendj
L
LA
k
J
Sort by Soil
‘eparate mfrommfro’m
In addition to sorting to reduce lint collection,
it is recommended that fabrics of similar construction be washed together whenever possible.
Sort by Color
Separate
o’n
’nn
9
.
.
.
m
m
Whites
a %
Lights
0
%
m
mL
from
:b
from
RL
Darks
0
~rom ~
Non-
0
==Colotiast
LA
-J
.~
LJ
For instructions on different fabrics and loads, see the Fabric and Cycle Settings guide.
It pays to check and prepare
clothes for washing.
Empty pockets, brush out cuffs,
zip zippers, and fasten snaps, hooks and buttons.
Do any necessary mending—rips,
hems, tears.
Check all items for areas of heavy
soil or stain.
Remove stains. See Stain
Removal Guide.
Turn
poly
knits inside-out to
minimize fabric surface damage.
EXTRA CLEANING (See
Tips to Help You Select
Settings section for instructions.) See Stain Removal Guide. See Fabric and Cycle
Settings guide. See The Problem Solver section.
Soaking and Pretreating—a good way to loosen deep soils and stains.
A thorough soaking with detergent or special soaking agent is another way to remove heavy soils, embedded dirt and even some stains.
Soaking can be either a completely separate washing step or a preliminary step to a complete wash cycle. For detailed information on how to soak in your washer, see How to Use the Soak
Cycle.
FOR INFORMATION ON SOAKING AGENTS, see Other Laundry Products Guide.
Pretreat heavy soil by rubbing
in a small amount of liquid detergent or a paste made of water and powdered detergent or soap. For best results, wait 1/2 hour before washing.
11
HOW TO LOAD YOUR WASHER
This illustration, with clothes just
reaching the Clothes Retaining Ring, shows a proper load. Clothes have ample room to move because they are not packed down, nor
wrapped around the agitator. Clothes are loaded dry since wet items are likely to pack down
which encourages overloading. This size load requires a full
water fill.
What is the best size load of clothes—large, medium, or small? Save time, energy and detergent by avoiding extra use of
the washer. Try to wash a full load of clothes. If you can it is better to
save clothes until you have a full load. If you must wash smaller loads, save water, energy and detergent by adjusting the water level for the size of the load. See Operating Instructions.
Load clothes dry.
Take a properly sorted group of
clothes and drop them loosely in the wash basket in this order:
~
Large items–like sheets. Do
not wrap around the agitator.
~ Small
items–like
washcloths.
@
Medium size items–like
towels.
DO NOT OVERLOAD YOUR
WASHER.
Try to mix large and small items
in each machine load for better washing action.
Wash large items (blankets, bed
spreads, mattress pads, etc. ) separately.
If machine is overloaded, you
may experience
oversudsing
or
out of balance conditions.
TO Add Items After the Washer Has Started
(*on models so equipped)
s
Turn off the washer by pushing in the Cycle NOTE: When washing stockings, panty hose and
Selector knob.
other easily tangled items, always handle separately.
*Cwefully
remove the
Filter-Flo
pan.
To minimize tangling, we recommend the use of a net laundry bag.
Add any additional articles by submerging them next
to the agitator.
. *Replace the
Filter-Flo
pan and restart the washer.
Special Recommendations for Washing Permanent Press If You Do Not Have a Dryer
If you are machine-washing permanent press clothes
Be careful not to overload washer. Permanent press
that you
plan
to line dry or drip-dry, use extra care to
clothes must have ample room to move freely. A
minimize wrinkling in the wash process:
medium size permanent press load is the largest
Remove clothes promptly as soon as washer stops
that
should
be washed.
and hang
immediately:
Use more water than you would for a regular load.
Use a medium water level for a
small
load. Use an
extra large water
level
for a medium load.
12
The use of a sufficient amount of detergent is one of the most important things you can do to make sure your wash comes out clean. Always follow the detergent manufacturer’s recommended amount.
Amount required varies
If the recommended amount of
according to:
detergent produces too many suds,
1. Water hardness
switch to a lower
sudsing
detergent
2. Amount of soil
brand, and follow instructions
3. Size of load
on package.
4. Type of detergent
Using too little
5. Wash temperature
detergent is a
Use more detergent if
common cause
you have...
of laundry
1. Hard water
problems. Always
~
2. Large loads
measure detergent
w
——.
3. Greasy or oily soils
in a standard measuring cup.
4. Lower wash temperature
5. Low phosphate detergent
How to use detergent;
granular, powdered or liquid:
For best results, add detergent to the wash basket before loading
clothes. If you load your clothes first, add detergent next to the agitator.
~RD
WATER—DO YOU
MVE
IT?
Before you can decide what to do about hard water,
you
need to know if you have it and, if so,
how hard it is.
If you
1
ive in a municipal area, contact your
water company.
s
If you 1 ive in a rural area, or in some suburban areas,
contact your county agent.
The answer will be “you have ‘so many grains’ per
gallon
(3.8 liters).” This means:
O to 3.5 grains per gallon (3.8
liters)—SOFT
3.6 to 7 grains—HARD
7.1 to
10.5
grains—VERY HARD
10.6 grains and over—EXTREMELY HARD
If your water is SOFT, you have no problem. You can use soap or detergent as you prefer and forget all about hard water. If you have HARD water—less than
10 grains—and you use phosphate detergent, you
also
have no problem. But, if you have more than 10 grains, you will need
to soften your water with either...
1. An installed water softener in your home, or
2. The use of a packaged water softener.
For information on water softeners, see the manufacturer’s recommendations.
13
OT~R
LAU~RY
PRODUCTS
Laundry Product and
~pe
BLEACH Chlorine liquid such as
Clorox
brand
Non-chlorine such as
Clorox
2 brand
FABRIC SOFTENERS Rinse additive such as Downy brand
SANITIZER Chlorine bleach such as
Clorox
brand
WATER SOFTENER Non-precipitating such as
Calgon
brand
Precipitating such as Borax brand
SOAK AGENT Such as
Biz
brand
PRE-TREATING, STAIN AND SPOT REMOVERS Such as
Spray’n
Wash
and
K2R
brands
TINTS AND DYES Powdered such as
Rit
and
Tintex
brands
How to Use It
Use your bleach dispenser. See How to Use Your Bleach Dispenser section.
If you do not have a bleach dispenser, pour diluted bleach next to the agitator
Follow package directions. Put bleach into washer with detergent.
Follow package directions for diluting softeners.
Use in case of infection and contagious disease. See under Bleach above.
Follow
package directions.
Add at start of wash cycle.
Follow
package directions.
Add at start of wash cycle.
Follow package directions.
Follow package directions. Treat only heavily soiled areas. Check garments’ care labels for instructions.
Follow package directions. NOTE: Tinted garments may not be colorfast. Wash separately.
Suecial
Instructions
1) Dilute bleach before using on any fabric. Do not pour undiluted liquid chlorine bleach directly into washer or on dry clothes.
2) Some of today’s washable fabrics should not be chlorine bleached such as: silk, wool,
spandex,
or non-fast colors.
3) Check manufacturers’ care labels for special instructions.
1) May be used on most fabrics. Test fabric first.
1) Helps make clothes fluffy and soft.
2) Reduces static electricity.
3) Use the following manufacturer’s directions. Too much may cause a hard, rough feeling on some clothes.
4) Do not pour directly on clothes.
Guards against infection by killing most bacteria and viruses.
Suspends hardness minerals in solution, keeping water
clear.
Combines with water hardness minerals to form precipitate which gives cloudy or milky appearance to water.
For best results, soak garments a minimum of 30 minutes.
CAUTION: Washer and dryer control panels and finishes may be damaged by some laundry pre-treatment soil and stain remover products if such products are sprayed on or have direct contact with the washer. Apply these pre-treatment products away from washer. The fabric may then be washed normally. Damage to your washer caused by pre-treatment products is not covered by your warranty.
Clean
washer to avoid discoloration of next load. Go through
complete cycle using hot water,
1/2
cup ( 120 ml) detergent,
I cup (240 ml) bleach. Wipe exterior parts.
Caution:
Tinting may discolor plastic in washer. Subsequent washings will reduce discoloration but may never eliminate it.
14
1.
Try to remove stains as soon as possible.
Test stain removal product on a hidden
The fresher the stain, the easier it is to remove. inside seam or on a sample of the material.
2. Before attempting to remove any stain, take
Avoid use of hot water on unknown stains.
these steps:
It can set some stains.
Find the fabric in the chart on the next page,
3. Follow stain removal with a thorough rinsing.
and use
only
recommended methods.
4. Wash with recommended amount of soap
Check the care label instructions that came with
or detergent.
the garment.
Stain Removal Hint—Using Chlorine Bleach for White and
Bleachable
Fabrics
Mix
1/4
cup (60 ml) chlorine bleach with one gallon (3.8 liters) of cool
water—approximately
80°F. (27°C. )—in
a sink or pan. Soak stained area
for 5 minutes and launder in washer.
The Case of the “Invisible” Stain
Food or cooking
oils
on your synthetic garments
If these stains are not completely removed in the wash,
may cause stains which are virtually invisible and
the oily spots may pick up dirt from the wash water.
which you may not notice as you put your clothes
Then they
will
become very visible and you may think
into the washer.
they were caused by the wash cycle itself.
Once These Spots Become Visible, How Can You Remove Them?
Rub in undiluted liquid detergent and
let
stand 30 minutes.
Rewash using hottest water the fabric can stand.
How Can You Prevent These “After-You-Wash” Stains?
Increase the amount of detergent normally used.
Increase water temperature where fabric will permit.
Wash synthetic garments more often.
15
STAIN
~MOVAL GU~E
Stain
Adhesives (Chewing Gum, etc.)
Antiperspirants, Deodorants
Blood
Chocolate, Cream, Ice Cream and Milk
Coffee and Tea
Cosmetics: Eye Shadow, Lipstick, Mascara, Liquid or Pancake Makeup, Rouge, Powder; Crayon; Grease,
Oil, Tar, Cod Liver Oil
Fresh Fruit, Fruit Juices, Wine, Vegetables or Food Coloring
Grass, Foliage, Flowers, Mildew, Scorch
Ink, Ballpoint
Perspiration
Rust
White and Bleachable Fabrics
See Controls Setting Guide.
Rub with ice or immerse in very cold water.
U.\e
dull
rc)[)l t[)
cargfull}
scrape ofla.s much
adhe,sive
or
gum
U.Y
po,v.~ib[e.
Sponge
with a safe dry cleaning fluid, * rinse well, then wash as usual. Apply undiluted liquid detergent. Rinse. If stain remains, bleach
according to the Stain Removal Hint; launder. If color has changed, you may be able to restore it by sponging with ammonia.** Rinse thoroughly.
Soak in cold water, then launder in warm water. If stain remains, bleach according to the Stain Removal Hint; launder.
Soak in cold water. Treat stain with a safe dry cleaning fluid,* rinse well, then wash as usual. Bleach according to the Stain Removal Hint.
Without cream: Bleach according to the Stain Removal Hint; launder. With cream: Follow guide directions for cream.
Treat stain with safe dry cleaning fluid,* rinse well, then wash as usual. Bleach according to the Stain Removal
Hint.
Soak stain in cool water. If stain remains, bleach according to
the Stain Removal Hint; launder.
Apply undiluted liquid detergent. Launder. (Treat mildew spots while they are fresh, before mold has a chance
to
weaken fabric. ) If either type stain remains, bleach according to the Stain Removal Hint; launder. (Severe scorch cannot be removed.)
Fresh stains: Place stain face down on an absorbent towel and use a spray cleaner or sponge with dry cleaning
tluid,
* rinse well,
then wash as usual. Old
stfiins:
Bleach according to the Stain
Removal Hint; launder. Apply undiluted liquid detergent and launder in warm water.
[f
color has changed you maybe able to restore it by treating
with ammonia or vinegar.
** [f any
stain remains, treat with sate
dry cleaning fluid,* rinse well, then wash as usual. Apply rust remover,
**
Usjng
manufacturer’s directions. Rinse
and launder.
Other Washable Fabrics
Same as white and bleachable fabrics.
Same as white and bleachable fabrics except use non-chlorine bleach.
Sponge or soak in cool water, then launder.
Soak in cold water. Sponge with a safe cleaning fluid,* rinse well, then wash as usual.
Sponge with warm water. If
stain
remains,
apply warm glycerine, let stand
30
minutes and rinse well, or sponge with a safe dry cleaning fluid,
+
rinse well,
then wash as usual. Sponge with a safe dry cleaning
tluid,*
rinse well, then wash as usual.
Sponge with warm water. Bleach remaining stain with non-chlorine bleach.
Sponge with warm water. Apply
undiluted
/iquid derergerrr.
Bleach remaining stain with non-chlorine bleach, then launder.
Old
mildew stains can seldom be
removed. Scorch can seldom be removed.
Same as white and bleachable fabrics except launder using non-chlorine bleach
Launder in warm water. Rinse well. Bleach with non-chlorine bleach.
Same as white and bleachable fabrics
A
*Caution: Because
cleaning
fluids
[end LO be
[oxic,
be sure
VmI
**~()
not [mix
Chlorine
b[eacfr
with ~mmonia or acids
such
as
A
are in a well ventilated mom when using them. Nn cleaning
vinegar and/or rust
remover. Mixing can prnduce a toxic gas
tluid should be used unless user is familiar with
[he
limitations
which
may cause death.
and required cautions (usually printed
on label).
Use
cxtrcmc caution
with flammable compounds.
SJVC
and refer to garment manufticturcr ’s c:tre labels.
Under nu
circumstances should fabrics containing flammable Imatcrials
(waxes, cleaning fluids, etc.) be washed in
wasber.
16
PROBLEM
LINT OR RESIDUE ON CLOTHES
GREASY OR OILY STAINS ON LAUNDERED GARMENTS
GRAYED
CLOTHES
QUESTIONS?
USE THIS PROBLEM SOLVER
[
POSSIBLE CAUSE
Incorrect sorting of clothes. Separate lint producers
(such as terry towels and
chenille) from lint receivers (such as man-made fabrics, velveteen, corduroy).
9
Washing too long, especially for smaller loads. For normal soil, wash one minute per pound of dry clothes.
Use of non-phosphate detergents which combine with hardness minerals to forma precipitate which can be mistaken for lint. Use a phosphate or liquid detergent; use warmer wash water or soften water with an installed mechanical softener or a packaged water softener.
Powdery residue from granular detergent may appear to be lint.
Predissolve
granular detergent in hot water before adding to washer; make sure detergent is completely dissolved before adding clothes; switch to liquid or cold water detergent or use warmer wash water. See Detergent section.
Overloading will cause abrasion which creates excessive lint. Wash fewer items with correct water level.
Too much bleach. Use correct amount of bleach according to package directions. Not enough detergent to hold lint in suspension during wash cycle. Increase amount
of detergent. See Detergent section. Incorrect use of fabric softener. If used in wash cycle, softeners may react with
detergent to create a white deposit. Use
softenersin
rinse cycle only unless package
speci~es
adding to wash cycle. See Otier Laundry Products section.
- -
Pilling usually on polyester-cotton blends is caused by norm~ wear md may look
like lint. Turning clothes inside-out may provide some help.
c
Static electricity caused by overdying will cause attraction. Use fabric softener in
rinse
cycle.
These are sometimes called “Invisible Stains” because you may not notice them before washing clothes. However, if oily soils are not completely removed in wash cycle, the oily spots may pick up dirt from the wash water. The spots will then be very visible. They are
not
caused by the washer. Wash synthetic garments as soon as possible after
wearing. Use more detergent than normal and hottest water fabric can stand.
K
spots appear, rub in undiluted liquid detergent, let stand 30 minutes and rewash with extra detergent using hottest water fabric can stand.
Insufficient detergent. You may need to increase amount of detergent used if load is
larger than normal, if soils are oily or heavier than average, if water level is large or if water is Hard to Extremely Hard.
Water not hot enough for type of load. Be sure water heater is set to deliver hot water to
the washer at
120°F.–1500F. (45°C.+50C.).
Do not wash when other hot water
needs—
such as
dishwashing
or family baths-are heavy.
Poor or inferior detergent. Change to phosphate detergent, if possible. Follow these steps:
1. Use water conditioner (such as
Calgon
brand).
2. Pretreat stains.
3. Use the hottest water possible.
4. Use bleach where possible.
5. Use presoak aids.
6. Install water softener.
Washer overloaded. Clothes cannot move freely to loosen and remove soil, causing
gray appearance. Follow correct loading procedures for size of load.
(continued next page)
17
PROBLEM
GRAYEDCLOTHES (continued)
YELLOWD
CLOTHES
BLUEORGRAY
COLOR STAINS
SHRINUGE, GENERW
THE PROBLEM SOLVER
(continued)
POSSIBLE CAUSE
Improper soaking with insufficient detergent. Usually a 30-minute soak is sufficient.
However, when using extended soaks for heavily soiled garments, you may need to use twice the recommended amount of detergent.
Use of soap in hard water. Switch to a phosphate detergent, or follow six steps at
bottom of opposite page.
Washing too long may result in increased soil deposition. Use shorter wash times for
smaller loads.
Detergent dissolves too slowly. Detergent must be present in the wash solution at the
start of agitation. See Detergent and Additives section.
To restore grayed clothes, follow one of these procedures:
1. Put clothes in washer. Fill with HOT water. Check garment manufacturer’s care labels to determine if hot water is suitable for garment.
Add a non-precipitating type of water softener
such as
Cdgon
brand.
Use 2% times as much as you need for normal water softening.
Do not use detergent or soap.
Allow clothes to go through complete cycle.
Repeat, if necessary.
2. If you prefer to use the Soak cycle, see How to Use the Soak Cycle section. Use the water softener in place of soak agent or prewash detergent and allow clothes to soak for about 20 minutes.
3. Use an extra cleaning cycle, see Tips to Help You Select Settings section.
Incomplete removal of soil due to constant use of insufficient detergent. Check hem
of T-shirt or pillow case. If they are white and center is yellow, it contains body oil.
Restore whiteness following procedures in Grayed Clothes, above.
Chlorine bleach may yellow some fabrics with resin finishes. Use oxygen bleach (such
as
Clorox
2 brand). Refer to garment manufacturer’s care instructions. Restore color
using color remover (such as
Rit
or
Tintex
brands), following package directions.
Iron
or manganese in water may cause overall yellowing or yellow spots.
1.
2.
3.
4.
Use extra detergent plus a non-precipitating water softener dissolved in water before adding clothes. Use non-chlorine bleach.
Have a special filter installed in your home to remove iron and manganese from water,
Run hot water for a few minutes to clean iron residue buildup in lines; drain water heater occasionally.
To remove spofi:
Spread stained portion over pan of boiling water and squeeze
lemon juice through stain.
To remove overall yellow,
use a commercially available rust scale remover, following package instructions. If porcelain damage can occur, do not use in the washer; use a plastic container,
Improper use of fabric softener. Never pour fabric softener directly on clothes; always dilute before adding to rinse water. See Other Laundry Products section. Also, do not lift lid during spin. This may cause improper dispensing, resulting in stains.
To remove
shins:
Dampen stained area and rub with undiluted liquid detergent. Rewash, using
chlorine bleach if safe for fabric. Some fabrics will shrink whether washed in a washer or by hand; others maybe safely
washed but will shrink in a dryer. Follow garment manufacturer’s care labels exactly. If in doubt, do not machine wash or dry.
18
PROBLEM
SHRINKAGE, KNITS
WRINKLING IN
PERMANENT PRESS AND “NO-IRON”
ITEMS
SNAGS, HOLES, TEARS, RIPS OR EXCESSIVE WEAR
POSSIBLE CAUSE
Relaxation shrinkage
can occur in knit fabrics that have been improperly stretched and elongated by the manufacturer. When this occurs, garment may be pressed back into shape after each wash and dry cycle.
Progressive or delayed shrinkage is
caused when starch or sizing (in some fabrics) is gradually removed by laundering. This may also be noticed in older garments that have been washed many times without previous shrinkage. Treat as for relaxation shrinkage above.
Shrinkage caused by overheating
occurs
in
certain
knit
fabrics
that have been heat-
shaped. When
washi~g,
drying or
ironing
temperatures exceed the temperatures used to shape set, shrinkage may occur. This cannot be corrected, but it can be prevented by washing in cool or warm water and drying on low or delicate heat.
Leaving clothes in dryer after tumbling stops. Remove and hang clothes immediately.
Too many clothes in dryer. Dry only one washer load at a time. Do not combine loads.
Improper loads. Avoid laundering heavy permanent press items, such as work clothes,
with lighter permanent press items such as shirts or blouses. Do not wash permanent press items with regular laundry.
Too many clothes in washer. Permanent press loads should always be smaller than
regular loads..
.no
more than medium loads to give clothes room to move freely.
Incorrect wash and dry cycles. Use Permanent Press Wash cycle which provides
a
cooldown
rinse to minimize
wrinMing.
Also use Permanent Press Dry cycle.
Incorrect water
level.
Use larger water level for medium load, medium level for
small load.
Repeated washing in too hot water. Wash in cold or warm water with plenty of
detergent.
Failure to use fabric softener. Proper use will minimize wrinkling.
To remove wrinkles:
Retumble
on Permanent Press setting in your dryer.
Rerinse
and dry on Permanent Press setting.
If unsuccessful,
retumble
on high heat for 10 to 12 minutes and hang immediately.
Send to dry cleaners for pressing.
Some wrinkles may remain which cannot be removed.
Q
Pins on garments or
shq
objects left in pockets. Check to make sure dl such objects
are removed. Also check wash tub.
Snaps, hooks, sharp buttons, belt buckles, zippers. Fasten hooks, zippers and buttons.
Remove sharp buttons and belt buckles. This is especially important in washing knits which snag easily. Turn knits inside out.
Holes with random square shapes with
yellow
discoloration may be caused by
improper use of chlorine bleach. Use only correct amount of bleach. See Other
Laundry Products section. Never add undiluted bleach to wash tub or allow clothes
to come into contact with undiluted bleach. Do not wipe up bleach spills with clothes.
Small, unnoticed tears may enlarge during washing process. Check garments before
washing and mend all rips and tears.
T~
PROBLEM SOLVER
(continued)
PROBLEM
SNAGS, HOLES, TEARS, RIPS OR EXCESSIVE WEAR (continued)
HEAVILY SOILED AREAS such as
collars and cuffs WASHER WON’T
OPERATE
WATER TEMPERATURE IS INCORRECT
WATER WON’T
DRNN
WATER LEAKS
POSSIBLE CAUSE
Chemicals
such
as hair bleach, dye, permanent wave solutions, battery acids and
toilet bowl cleaners may cause fabric
holes.
Rinse all towels and other articles that came in contact with these chemicals before putting them in wash. Do not contaminate clothing articles with these chemicals.
As permanent
press garments age, they may show fraying at collars and cuffs. This
is normal due to weakening of fibers by the permanent press process. It is not
caused
by washer. You can slow this process by washing small permanent press loads with a medium water level. Do not wash heavy items such as towels with permanent press. Remove collar stays, when possible,
May be caused by the use of Regular Cycles for delicate articles. Use Permanent
Press cycle. Refer to garment manufacturer’s care labels.
Garments weakened by age, sun or atmosphere. This is inevitable and is not caused
by washer.
Overloading or
underloading
washer for selected water level. Load washer only with
number of items that will move freely. Select correct water level.
Pretreat with liquid detergent. See Other Laundry Products section.
@@@@
Make sure cord is plugged into outlet.
Make sure both hot and cold faucets are turned on.
Make sure controls are set and
Cycle
Selector knob is pulled out to ON position.
Make sure lid is closed. Washer will
fill
but will not spin or agitate with lid open.
Check house fuses or circuit breakers. If another appliance is sharing the electrical
outlet. remove it. Washer should have
separate
outlet.
Make sure temperature selector controls are correctly set.
Make sure hot and cold faucets are turned on and
regulated correctly.
Q
Make sure hoses are connected to correct faucets...
hot to hot, cold to cold.
Water valve screens may be stopped up. Remove inlet
o
+
5{
hoses from water valve, Clean the screens and reinstall hoses.
Check house water heater to make sure it is delivering water at
120°F,-1500F. (45°C.–650C.).
D
Make sure drain hose is not kinked.
TOD
of drain outlet should be less than 8 ft.
(2.4 m)
above floor.
Make sure hose connections are tight at faucets.
Make sure end of drain hose is
correctlv
inserted in and secured to drain
facility.
20
PROBLEM
POSSIBLE CAUSE
WASHER IS NOISY
Make sure washer is level and firm to the floor with rubber foot pads in place and
front jam nuts tight. See your
Instdlatiort
Instructions.
A sharp, distinctive sound will be heard at the end of each spin period as the motor
.
stops
a’nd
the spin brake inside the transmission “locks
in.’’-Th~s
sound is normal.
Heavily unbalanced loads can cause the washer to vibrate excessively during spin, and may cause it to move from its original position. In extreme cases (usually occurs when washing a single, heavy item or a small load when water
level
is set higher than necessary), the spin basket may strike the outer tub, creating a loud but harmless noise. To correct, stop the washer by pushing in the Cycle Selector knob, open the lid and redistribute the load evenly about the wash basket. Close the lid and restart.
I
WASHER PAUSES
Washer normally pauses between washing steps... such as between wash and spin or
IN CYCLE between spin and rinse.
If you need more
help...call,
toll free: GE Answer Center@/ 800.626.2000/ consumer information service
CAW Am CLEAN~G
USER MAINTENANCE INSTRUCTIONS
The Tub.
The porcelain is self-cleaning. Leave lid
To Store Washer.
Ask service technician to remove
open after washing to
allow
moisture to evaporate. water from drain pump and hoses to prevent freezing.
Do not use harsh or gritty cleansers.
Do not store the washer where it will be exposed
The Exterior.
Wipe off any
spills
of washing to the weather.
compounds. Wipe or dust with damp cloth. Try
For Long Vacations.
Be sure water supply is shut off
not to hit surface with sharp objects.
at faucets and drain all water from hoses if weather will be below freezing.
How to remove the agitator To remove limestone from
Filter-Flo
pan
To remove the agitator,
~
Cap
(on models so equipped) snap the cap off and remove the screw.
Then remove the
o
ii
Sciew
Agitator
Soak filter pan in a preheated
160°F.
(71 ‘C.)
Extender
solution of half vinegar and half water for 15
agitator extender (on
models so equipped) and the agitator.
h
(on some models)
minutes. Then brush each side of pan with a stiff bristle brush while flushing with running water.
— Agitator
1;
To replace the agitator,
carefully
<)
-j/ )
.
.
,..
lower it straight down
-’
onto the shaft so that it fits snugly into place. Replace the agitator
i
Shafi
extender (on models
(Appearance may vary)
so
equipped), the
screw and the cap.
CAUTIONS:
Do not soak in porcelain container. Vinegar can
damage porcelain.
c
Do not exceed
180°F. (82°C.
) or filter pan
may warp.
21
NOTES
22
We’ll Be There
With the purchase
ofyour
new GE appliance, receive the assurance that if you ever need
information or assistance
from
GE, we’ll be there. All you have to do is call—toll-free!
In-Home Repair Service
80ME<ARES(80M32-2737)
A
(JE consumer
service
profkssiorral”
will provide
expert repair
service,
scbedLlled
;{( ii
time
that
(:onverlient
for yoL1. Marry
(;kl
(;onsurner
Service
colrll~~~ny-oper:ll.eel”
locations ofl’er yoLi
service
today or tomorrow, or. al. your
convenience
(7:()()
<i.rn. 10
7:()()
p.m. weekdays,
!):()() ;i.
m. to
2:()()
p.m. S;iturclays).
our
f’:lctory-t[:iirlc[i technicians know your appliance inside and
OLII-S()
most
rep;~irs c;trr
be h:mdled in just
one visit.
GEAnswer Center@
8086262000
Wh:i[ever your
question
abou[ any
(IFI rn:jor
:Ippliance, (1E Answer- (Ienter@
infi)rnl:~{iorr
service is available
[.()
help.
YOLlr
call—and your question-will be
answered
promptly and
courteously.”
And
yOLI
can c:dl
<iny
time.
(lE1
Answer
(;erlter@ service is
open 24
bo~lrs:1 day, 7 clays:] week.
SECT,ONA.A
...,..
...7” .,...,. .,,.
.6..”.-,.
. . . . . . . . . . . . . . . . . . . . . . . . ..., =,.,
kr
Customers With Special Needs...
80~62E2000
Upon request.,
(;E
will provide
(;onsumers
with
imp>iir-ed
hearing or speech who b:ivc
Br2iille controls” for a
variety of (lF;
access
to zi TDD or ;i conven
tiorral
teletypewriter
rrr;iy
appliances, and a
brochure
to
call
800-TDD-(IF.A(;” (800-83:3-4322)”
(.()
request
assist in planning
Li
b;irrier--fiee
inforrn;ttiorr”
or service.
kitchen
fk)r
persons with limited
mobility, T() obtain these items,
free of ’charge,
c:dl
800.62
(;.2000.
Service Contracts
80@626-2224
YOL1 c;~rr
b;ivc
tbc
secure fkeling that (;E;
(;orlsunler
Service will still be [here
Zlf’ler your” war-l”arrty
expires. l)ur(:hase a (;~. contract while your warranty is still
in
eff’ect
~ind yoLI’11
receive ii substantial discount. With a multiple-year corrtr:ict,
you’re assured of’firture service at today’s pri(:es.
Patis andAccessories
80&626-2002
Individuals qualified to service their own appliances User maintenance instructions contained in
tiis
booHet
can have needed
piu-ts
or ;I(:cessories
serrl
directly to
cover procedures intended to be performed by any user.
their
home.
‘Ihc (;E1 p~ut.s
sys[cm provide’s
~I{:ccss (() ovcl-
Other servicing
gener~y shodd
be referred to qualified
47,000” p:~rts...:md
all (;EI
Genuine Renewal P:irts are
service personnel. Caution must be exercised, since
fillly
w:~rranted.
VISA, M~ister(;arcl :md
L>iscover- (ards
improper servicing may cause unsafe operation.
arc accepted.
L
YOUR GE AUTOMATIC
Staple sales slip or cancelled check
CLOTHES WASHER
here. Proof of original purchase date
I
WARRANTY
is
needed to-obtain service
under warranty.
I
I
WHAT IS COVERED
FULL ONE-YEAR WARRANTY
For one year from date of original purchase, we will provide, free of
charge, parts and service labor
in
your home to repair or replace
any part of
the
washer that fails
because of a manufacturing defect.
LIMITED ADDITIONAL FOUR-YEAR WARRANTY
For the second through fifth year from date of original purchase, we will provide, free of charge, replacement parts for
any
pati
of
the
transmission
that fails because of a manufacturing defect. You pay for the service trip to your home and service labor charges.
Or, if
you desire, we will provide a
completely reconditioned transmission. You pay
for the shop reconditioning labor, the service trip to your home and
service labor charges.
This warranty is extended to
the original purchaser and any
succeeding owner for products purchased for ordinary home use in the 48 mainland states, Hawaii and Washington,
D.C. In Alaska the
warranty is the same except that it is LIMITED because you must pay to ship the product to the service shop or for the service technician’s travel costs to your home.
All warranty
sewice will be
provided by our Factory Service Centers
or by our authorized
Customer
Care@
servicers during
normal working hours. Should your appliance need
service, during warranty period or beyond, call 800-GE-CARES (800-432-2737).
II
1
I
II
WHAT IS NOT COVERED
Service trips to your home to teach
Replacement of house fuses or
you how to use the product.
resetting of circuit breakers.
Read your Use and Care material.
. Failure of the product if it is used
If you then have any questions
for other than its intended purpose
about operating the product,
or used commercially. please contact your dealer or our Consumer Affairs office at the
Damage to product caused by
address below, or call, toll free:
accident, fire, floods or acts of God. GE Answer
Cente@
WARRANTOR IS NOT
800.626.2000
RESPONSIBLE FOR CONSEQUENTIAL DAMAGES.
consumer information service
Improper installation.
If you have an installation problem, contact your dealer or installer. You are responsible for providing adequate electrical, plumbing and other connecting facilities.
Some
states
do not
allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which
va~
from state to state.
To
know what
your legal rights are
in
your state, consult your local or state consumer affairs
office or your state’s Attorney General.
Warrantor: General Electric Company
If further help is needed concerning this warranty, write:
Manager—Consumer Affairs, GE Appliances, Louisville, KY 40225
Th;s
book is printed on recycled
pape~
Part No. 175 D1807P011
WWA8610S WWA5600S
Pub
No.
49-9788
WWA571OS
WWA3650S
10-93
CG
Printed in
Louisville,
Ky
Loading...