GE
Lighting Solutions
Area Lighting
Wallighter® 250 Cutoff (W25C)
imagination at work
Product Features
For that extra security in an insecure world, GE Area Wallighters provide light were needed, on pathways, entrances,
walkways, and building parameters. These area wallighters offer an attracitve, yet economical solution to those
outdoor lighting needs where a wall-mounted fixture is the only practical choice.
Applications
• Building perimeters, entrances, walkways and
residential yards
• Loading docks and many other wall mounted area
lighting applications
Housing
• Three-piece die-cast aluminum housing protected
inside and out
Finish
• Dark bronze polyester powder finish
Rating
• 1598 Listed Suitable for Wet Locations
/
Reflectors
• Enclosed, gasketed, with anodized aluminum
reflector and tempered glass bottom closure
Unique Features
• Standard and tamper resistant hardware included
• Thru-feed conduit entrance on side with built-in
conduit clamps
• Front access to ballast components when installed
• Mogul (E39 standard) or medium base (E26 standard)
sockets
Ordering Number Logic
Wallighter® 250 Cutoff (W25C)
W 2 5 C G D B
_ _ _ _ - _ _ - _ - _ - _ - _ - _ - _ _ _ - _ _ - _
PROD. ID
W25C =
Wallighter 250
(250 watt max.)
luminaire with
cutoff optics
WATTAGE
See Ballast and
Photometric
Selection Table
05 = 50
07 = 70
10 = 100
15 = 150 (55V)
17 = 175
20 = 200
25 = 250
77 = 70/75
LIGHT
SOURCE
See Ballast and
Photometric
Selection Table
E = Energy Act
Compliant Pulse
MH (EPMH)
S = HPS
M = MH
P = PMH
BALLAST
VOLTAGE COLOR
See Ballast and
Photometric
Selection Table
60Hz
0 = 120/208/
240/277
Multivolt
1 = 120
2 = 208
3 = 240
4 = 277
5 = 480
C = 120x240x
277V
D = 347
F = 120X347
TYPE
SELECTION
See Ballast
and Photometric
Selection Table
A = Autoreg
G = Mag-Reg
with
Grounded
Socket Shell
H = HPF
Reactor or
Lag
K = Hot Restart
M = Mag-Reg
N = NPF
Reactor or
Lag
P = CWI with
Grounded
Socket Shell
FUNCTION
1 = None
3 = Internal
For PE Kit, see
Accessories
* Not available
with multivolt
or 480V
PE
*PE control
LENS
TYPE
G = Glass
LAMP BASE
For IES Optical
Configuration
See Ballast and
Photometric
Selection Table
MGL = Mogul base
E39 (Standard
without lamp)
MED = Medium base
E26 (Standard with
lamp)
DB = Dark Bronze
OPTIONS
B = Time Delay
Automatically
Switched Quartz
F = Fusing (Not available
with multivolt)
Ballast and Photometric Selection Table
All light sources are clear unless otherwise indicated.
IES Photometric
Light Distribution Curve Number
Wattage Source Multivolt 120 208 240 277 480 347, 120X347 Type 35-
MOGUL BASE LAMP (NOT INCLUDED)
50 HPS H H, K, N H H H N/A H SC3 178825
70, 100, 150(55V) HPS H G, H, K, M G, H, M G, H, M G, H, M G, H, M G**, M SC3 178825
200* HPS A A A A A C/F A SC3 178830
250* HPS A A A A A A A SC3 178830
175 EPMH N/A N/A N/A N/A N/A N/A N/A SC3 178828
250* EPMH A A A A A A A SC3 178831
CANADA ONLY
175 MH N/A A A A A N/A A SC3 178828
250* MH N/A A, P A, P A, P A, P P A, P SC3 178831
MEDIUM BASE LAMP (INCLUDED)
50, 70, 100, 150(55V) HPS N N N/A N/A N/A N/A N/A SC3 178833
70, 100, 150**** MH H*** N/A N/A N/A N/A N/A N/A SC3 178835
NOTE: *Horizontal lamp operation. C/F = Contact Manufacturer N/A = Not Available
**347 Volt Only ***150W PMH Available in Tri-Volt Multivolt: 120X208X277V or 120X240X277V
****150W PMH Only available in HPF-LAG (H) Ballast Type for 120 or 208 or 240 or 277V and Auto-Reg (A) in 120 or 277V
Ballast Type/Voltage
60Hz
Product Dimensions
KNOCKOUT FOR
.75 in. (19 mm)
CONDUIT
7.750 in.
(197 mm)
GASKET
CRADLE FOR
.75 in. (19 mm) CONDUIT
12.875 in.
(327 mm)
INTERNAL GLARE
SHIELD OPTION
4.000 in.
(102 mm)
14.438 in.
(367 mm)
.686 in. (17 mm) DIA
KNOCKOUT FOR
PE KIT ASSEMBLY
2.875 in.
(73 mm)
.437 in. DIA
(11 mm) DIA
(2 PLACES)
.358 in. (9 mm) DIA KNOCKOUT
(4 PLACES)
4.375 in.
(111 mm)
8.000 in.
(203 mm)
.188 in. (5 mm) DIA KNOCKOUT
FOR USE WITH 4.000 in. (102 mm)
OCTAGON BOX (4 PLACES)
4.000 in.
(102 mm)
.188 in. (5 mm) DIA KNOCKOUT
FOR USE WITH GEM-BOX
1.375 in. (35 mm) MAX
.625 in. (16 mm) MIN
6.344 in.
(161 mm)
.150 in.
(4 mm)
.188 in. (5 mm) DIA KNOCKOUT
FOR USE WITH 3.250 in. (83 mm)
OCTAGON BOX (4 PLACES)
.875 in. (22 mm) DIA
• Approximate Net Weight: 15-30 lbs (8-14 kgs)
• Suggested Mounting Height: 8-20 ft. (2-6 M)
DATA
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company.
© 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
OLP-2951 (Rev. 06/19/12)
Loading...