Page 1
GE
Lighting Solutions
Area Lighting
Wallighter® 175 (W1LR, W1SR, W1LG & W1SG)
imagination at work
Page 2
Product Features
For that extra security in an insecure world, GE Area Wallighters provide light were needed, on pathways, entrances,
walkways, and building parameters. These area wallighters offer an attracitve, yet economical solution to those
outdoor lighting needs where a wall-mounted fixture is the only practical choice.
Applications
• Building perimeters, entrances, walkways and
residential yards
• Loading docks and many other wall mounted area
lighting applications
Housing
• Two-piece die-cast aluminum housing
Rating
• 1598 Listed Suitable for Wet Locations
/
Reflectors
• Acrylic refractor or vandal-resistant polycarbonate
refractor
Unique Features
• Mogul (E39 standard) or medium base (E26 standard)
sockets
• Standard and tamper resistant hardware included
• Thru-feed conduit entrance on side with built-in
conduit clamps
• Front access to ballast when mounted
• Field installed Internal Glare Shield (IGS-WL175)
available
• Magnapack packaging available
Page 3
Ordering Number Logic
Wallighter® 175 (W1LR, W1SR, W1LG & W1SG)
DB
_ _ _ _ - _ _ - _ - _ - _ - _ - _ - _ _ _ - _ _ - _
PROD. ID
W1LR =
Wallighter 175
(Mogul Base
E39 Socket
Standard
without Lamp)
W1SR =
Wallighter 175
(Medium Base
E26 Socket
Standard with
Lamp)
W1LG =
Wallighter 175
(Mogul Base
E39 without
Lamp with
Internal Glare
Shield)
W1SG =
Wallighter 175
(Medium Base
E26 with Lamp
and Internal
Glare Shield)
WAT TAGE
See Ballast and
Photometric
Selection Table
05 = 50
07 = 70
10 = 100
15 = 150 (55V)
LIGHT
SOURCE
See Ballast and
Photometric
Selection Table
E = Energy Act
Compliant Pulse
MH (EPMH)
M = MH
P = PMH
S = HPS
BALLAST
VOLTAGE COLOR
See Ballast and
Photometric
Selection Table
60Hz
0 = 120/208/
240/277
Multivolt
1 = 120
2 = 208
3 = 240
4 = 277
5 = 480
C = 120x240x
277
(150W
PMH only)
D = 347
F = 120X347
T = 220
50Hz
6 = 220
Y = 240
TYPE
SELECTION
See Ballast
and Photometric
Selection Table
A = Autoreg
G = Mag-Reg
with
Grounded
Socket Shell
H = HPF
Reactor or
Lag
K = Hot Restart
M = Mag-Reg
N = NPF
Reactor or
Lag
PE
FUNCTION
1 = None
For PE
Kit, see
Accessories
3 = Internal PE
control*
* Not available
with multivolt
or 480V
LENS
TYPE
A = Acrylic
L = Polycarbonate*
* Not for car wash
applications
IES
DISTRIBUTION
TYPE
See Ballast and
Photometric
Selection Table
SN2 = Short Non-cutoff
Type II
SN3 = Short Non-cutoff
Type III
SN4 = Short Non-cutoff
Type IV
SS3 = Short Semi-cutoff
Type III
SS4 = Short Semi-cutoff
Type IV
MN4 = Medium Noncutoff Type IV
DB = Dark Bronze
OPTIONS
B = Time Delay
Switched
(Drop
Lens only)
F = Fusing (Not
available
with multivolt or
dual voltage)
Ballast and Photometric Selection Table
All light sources are clear unless otherwise indicated.
Ballast Ballast
IES Photometric IES Photometric
Light Distribution Curve Number Distribution Number
Wattage Source Multivolt 120 208 240 277 480 347, 120X347 220 220 240 Type 35- Type 35-
W1LR MOGUL BASE WITHOUT LAMP
50 HPS H H, K, N H H H N/A H H H N/A SN4 178047 SN4 178046
70, 100, 150(55V) HPS H, K G,H,K,M G,H,M G,H,M G,H,M G,M H N/A H,M H SN4 178047 SN4 178046
175 MH A A A A A A A A A A SN4 178051 SN4 178050
175 MH A A A A A A A A A A SN4 178049 SN4 178048
(Coated)
W1SR MEDIUM BASE WITH LAMP
70, 100, 150(55V) HPS H, N H, N N/A N/A H, N H H, N N/A H,M H SN3 178053 SN3 178052
70, 100, 150** PMH H*, N H, N, A H, N N/A H, N, A H, N H, N N/A N/A N/A SN2 178055 SN2 178054
70, 100, 150** PMH H*, N H, N, A H, N N/A H, N, A H, N H, N N/A N/A N/A SN2 178057 SN2 178056
(Coated)
175 MH N/A N/A N/A N/A N/A N/A A A A A SN2 178055 SN2 178054
175 MH N/A N/A N/A N/A N/A N/A A A A A SN2 178057 SN2 178056
(Coated)
W1LG MOGUL BASE WITHOUT LAMP WITH INTERNAL GLARE SHIELD
50 HPS H H, K, N H H H H H H H N/A C/F C/F SN4 178476
70, 100, 150(55V) HPS H G,H,K,M G,H,M G,H,M G,H,M G,M H N/A H,M H C/F C/F SN4 178476
175 MH N/A N/A N/A N/A N/A N/A A A A A C/F C/F SS4 178478
(Coated)
W1SG MEDIUM BASE WITH LAMP WITH INTERNAL GLARE SHIELD
70, 100, 150(55V) HPS H, N H, N N/A N/A H, N H H, N N/A H,M H C/F C/F SS3 178479
70, 100, 150** PMH H*, N H, N, A H, N N/A H, N, A H, N H, N N/A N/A N/A SN3 179122 C/F C/F
70, 100, 150** PMH H*, N H, N, A H, N N/A H, N, A H, N H, N N/A N/A N/A SN4 179125 C/F C/F
(Coated)
175 MH N/A N/A N/A N/A N/A N/A A A A A SN3 450685 C/F C/F
175 MH N/A N/A N/A N/A N/A N/A A A A A SS3 450686 C/F C/F
(Coated)
NOTE: N/A = Not available. C/F = Contact Manufacturer
**150W PMH Only available in HPF-LAG (H) Ballast Type for 120 or 208 or 240 or 277V and Auto-Reg (A) in 120 or 277V
Type/Voltage Type/Voltage
60Hz 50Hz
*150W PMH Available in Tri-Volt Multivolt: 120X208X277V or 120X240X277V
Acrylic Polycarbonate
Page 4
Product Dimensions
KNOCKOUT FOR
.75 in. (19 mm)
CONDUIT
7.750 in.
(197 mm)
GASKET
CRADLE FOR
.75 in. (19 mm) CONDUIT
12.875 in.
(327 mm)
INTERNAL GLARE
SHIELD OPTION
4.000 in.
(102 mm)
14.438 in.
(367 mm)
.686 in. (17 mm) DIA
KNOCKOUT FOR
PE KIT ASSEMBLY
2.875 in.
(73 mm)
.437 in. DIA
(11 mm) DIA
(2 PLACES)
.358 in. (9 mm) DIA KNOCKOUT
(4 PLACES)
4.375 in.
(111 mm)
8.000 in.
(203 mm)
.188 in. (5 mm) DIA KNOCKOUT
FOR USE WITH 4.000 in. (102 mm)
OCTAGON BOX (4 PLACES)
4.000 in.
(102 mm)
.188 in. (5 mm) DIA KNOCKOUT
FOR USE WITH GEM-BOX
1.375 in. (35 mm) MAX
.625 in. (16 mm) MIN
6.344 in.
(161 mm)
.150 in.
(4 mm)
.188 in. (5 mm) DIA KNOCKOUT
FOR USE WITH 3.250 in. (83 mm)
OCTAGON BOX (4 PLACES)
.875 in. (22 mm) DIA
• Approximate Net Weight: 15-25 lbs (6-9 kgs)
• Suggested Mounting Height: 8-20 ft. (3-7 M)
• Effective Projected Area: 1.0 sq. ft. max. (0.09 sq. M max.)
DATA
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company.
© 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
OLP-2950 (Rev. 06/19/12)
Loading...