GE VSE Specification Sheet

GE

INDOOR LIGHTING

g

Lighting Solutions

GUIDE FORM SPECIFICATIONS
NUVATION ™ INDUSTRIAL LUMINAIRE

VERSABEAM ® with Optical Sliding Disconnect and Charcoal Filter

GENERAL DESCRIPTION

The complete luminaire designated ____________(identify) shall
be a GE - “VSE” VERSABEAM ® luminaire with Optical Sliding
Disconnect and Charcoal Filter, ordering number_________
(specify VSE, plus ordering number logic from catalog) or ap­proved equal, to operate one _________(specify [250, 320, 350
or 400] watt pulse start metal halide or [250, 320, 350 or 400]
ceramic metal halide lamp from a line voltage range between
208 and 277 volts with a +/- 10% line voltage tolerance, 50/60
Hz and will automatically sense voltage within specified range.
The luminaire shall be suitable for continuous service indoors
in a maximum ambient temperature of 55°C. The luminaire
shall be UL Listed SUITABLE FOR DAMP LOCATIONS. UL Listed
for metal halide lamps in polymeric lamp containment barriers.
Standard construction is IP52. Units with “W” (Wet Location)
option are IP54.

The optical assembly shall be enclosed with a continuous

MECHANICAL CONSTRUCTION

For ease of installation and to facilitate maintenance and
replacement, the luminaire shall be supplied as components –
ballast and optical.

The ballast housing shall be provided with easy-to read­ moisture-resistant nameplates, which can be seen without
disturbing the installed luminaire. All ballast and optical
assemblies shall include provisions for optional field mounting
safety chains.

The ballast housing shall be made out of die-cast alumi­num. The ballast housing and adapter box shall have a white
polyester paint finish.

To facilitate mounting, the luminaire shall have separate light­weight, slide-on adapter box that can be easily removed from
the ballast housing and assembled to the structural or mount­ing hardware prior to mounting of the remainder of the lumi­naire. The slide-on mounting adapter box shall have provision
for ¾ inch pendant mounting with through feed capability and
include easy access wiring box cover plates.

BALLAST OPERATION

See Nuvation Electronic Ballast Spec for specific specs.

gasket and shall include an activated charcoal filter capable of
filtering gaseous and particulate matter. The filter shall be con­structed to permit free passage of air, allowing the luminaire to
breathe during normal off-on heating and cooling cycles and
therefore eliminating unnecessary stress on the gasketing.

The filter assembly shall be factory installed, and shall be
located to prevent accidental dislodgment when luminaire is
installed.

The optical assembly shall have a patented acrylic refractor
with reflecting and refracting prisms that provide 70% output

°

from 0

to 60° from nadir, 60% output from 15° to 50° from nadir.
The optical assembly shall be hinged and latched with captive
vibration-resistant stainless steel spring latches.

The reflector material shall be formed aluminum, with a
chemically bonded lightweight non-breakable glass ALGLAS
finish on both inside and outside surfaces providing corrosion
resistance, durability and easy cleaning.

FOR MORE DEFINITIVE ELECTRICAL INFORMATION, REFER TO
BALLAST SPECIFICATIONS IN TECHNICAL DATA SECTION OR NU­VATION BROCHURE OLP-2762.

®

OPTICAL ASSEMBLY

Mounting of the optical assembly to the ballast assembly
must be secured by positive, vibration-resistant means. The
optical and ballast assemblies must include a positive align­ing electrical sliding disconnect between optical and ballast
components. The disconnect must have no exposed live metal
parts.

The optical assembly shall contain an E39 mogul base socket
with superior lamp gripping. The socket shall have the ability to
handle the higher pulse ratings of newer HID systems.

Guide Form Specifications – 2011

g

GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com

1 6 9 4 3 5 3 3- - -- 8 8 8

GE Lighting Solutions is a subsidiary of the General Electric Company. Evolve and other trademarks belong to GE Lighting Solutions. The GE brand and logo are trademarks of the General Electric Company.
© 2011 GE Lighting Solutions. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.