GE V3SL, V3ST Data Sheet

Page 1
GE
Lighting Solutions
Flood Lighting
Versaflood™ III Induction (V3SL & V3ST)
imagination at work
Page 2
Product Features
GE offers reliable Signlighter fixtures for signlighting, recreational, security, facade (ground, structure or wall mounted) and billboard lighting applications.
Applications
Housing
• Heavy gauge die formed aluminum housing
Finish
• UV stabilized powder-coat paint finish
Ratings
Listed Suitable For Wet Locations
/
Mounting
• Dark Sky optional top-mount version is available (use T option)
Reflectors
• Enclosed and gasketed with Alzak finished aluminum reflector and tempered glass lens
Unique Features
• 5 year warranty
• Corrosion Resistant Hardware
• Stainless steel hinged door latch
• Weather resistant gasket system
• Socket is pulse-rated porcelain, nickel contacts
• Passes ANSI vibration testing of 1.5g
• Passes ASTM B117 1000 hour salt fog
• Supplied with lamp
Induction Lamp/Ballast System Features
• 80+ CRI
• Lamp/ballast system life is rated 100,000 hours (vs 24,000 for HPS)
• Instant On and Instant Restrike
• 4000K Color Temperature
• 5 year warranty
• Minimum Start -15°F
• Max ambient 55°C
HID Billboard Features
Bulletin Reflector — Designed for higher reaching light distribution on standard bulletins, including extensions. Four fixtures will light a 14’ x 48’ board, mounted 3’ down and 6’ out. Light fixtures should be spaced 12’ apart, with outside fixtures 6’ in from each end.
Poster Reflector — Designed for 12’ x 24’ poster board utilizing only one fixture mounted in the center, approximately 1’ down and 4’ out.
Page 3
Ordering Number Logic
Versaflood™ III Induction (V3SL & V3ST)
Induction
85 Q E S N 4 _ _ _ _ - _ _ - _ - _ - _ - _ - _ _ _ - _ _ - _
PROD. ID
V3SL =
Versaflood 3 Signliter Bot­tom Mounting
V3ST = Versa-flood 3 Top Mount
WATTAGE
85 = 85 watt 1 = 120
LIGHT
SOURCE
Q = 85 watt QL
Induction Lamp/ Ballast system
VOLTAGE
G = 200 - 277 VOLT
50/60 hz AC/DC
BALLAST
TYPE
E = Electronic
Ballast
MOUNTING
OPTIONS
A = 1 1/4”
Slipfitter
B = 2” Slipfitter C = Plate for
Bottom mtg only (V3SL)
IES DISTRIBUTION
TYPE
SN4
COLOR
GR = Gray DB = Dark Bronze
OPTIONS
F = Fusing
(Not available with 200/277 volt)
S = Side Glare Shield T = Top Mount
Full Glare shield for 0 light @ 90 (use only with V3ST)
HID
E A S N 4 F _ _ _ _ - _ _ - _ - _ - _ - _ - _ _ _ - _ _ - _
PROD. ID
V3SB =
Bulletin Reflector
V3SP = Poster Reflector
WATTAGE
25 = 250 watt 40 = 400 watt
LIGHT
SOURCE
E = Energy Act
Compliant Pulse MH (EPMH)
VOLTAGE
0 = Multivolt 1 = 120 2 = 208 3 = 240 4 = 277
BALLAST
TYPE
A = Autoreg
MOUNTING
OPTIONS
A = 1 1/4” Slipfitter B = 2” Slipfitter
IES DISTRIBUTION
TYPE
SN4
COLOR
GR = Gray DB = Dark Bronze
OPTIONS
F = Fusing
(Not available with multivolt)
Ballast Selection Table
Light Ballast Wattage Source Type
85 QL Induction E 250 EPMH A 400 EPMH A
Photometric Selection Table
PHOTOMETRIC SELECTION TABLE
Photometric Poster Photometric Bulletin Photometric Light IES Curve Number Curve Number Curve Number Wattage Source Distribution 35 - 35 - 35 -
85 QL Induction SN4 452982 N/A N/A 250 EPMH SN4 N/A 453455 453452 400 EPMH SN4 N/A 453455 453453
Page 4
Product Dimensions
SLIPFITTER MOUNT
20.8 in.
(528.32mm)
PLATE MOUNT
20.8 in.
(528.32mm)
20.8 in.
(528.32mm)
5.0 in. (127mm)
12.65 in.
(321.31mm)
1.66 in. MAX DIA POLE OD (42.16mm)
12.75 in.
(323.85mm)
20.8 in.
(528.32mm)
4 SLOTS 7/16 x 9/16
10 in.
(254mm)
24 in.
(609.60mm)
22 in.
(558.8mm)
6.5 in.
(165.1mm)
• Approximate Net Weight: Induction: 22 lbs. (9.98 kgs)
DATA
HID: 38.5 lbs. (17.46 kgs)
GE Lighting Solutions 1-888-MY-GE-LED www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company. © 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
OLP-2971 (Rev. 06/19/12)
Loading...