GE PSB9100SFSS User Manual
2x4’s or
equivalent
solid floor
25-1/4"
Cutout width
cabinet
width
Required
cutout location
36-3/4"
minimum
from floor
Junction box
location
(240-volt
models only)
A=Allow 1" overlap of oven over bottom edge of cutout.
B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.
4-3/16"
21-1/2"
To Back of Control
17-1/2"
Cutout height
A
B
23-1/2"
Cutout depth
Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
Construct Solid
Bottom Min.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
Conduit
(48-1/2"
long)
19-1/8"
26-3/4"
25-1/4"
Cutout width
cabinet
width
Required
cutout location
36-3/4"
minimum
from floor
Junction box
location
(240-volt
models only)
A=Allow 1" overlap of oven over bottom edge of cutout.
B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.
4-3/16"
21-1/2"
To Back of Control
17-1/2"
Cutout height
A
B
23-1/2"
Cutout depth
Advantium Wall Oven Dimensions (in inches)and
Cabinet Installation (in inches)
Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
Construct Solid
Bottom Min.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
Conduit
(48-1/2"
long)
19-1/8"
26-3/4"
C
L
2x4’s or
equivalent
solid floor
21-5/8"
over centerline
of cabinet
25-1/4"
Cutout width
cabinet
width
Required
cutout location
36-3/4"
minimum
from floor
Junction box
location
(240-volt
models only)
A=Allow 1" overlap of oven over bottom edge of cutout.
B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.
4-3/16"
21-1/2"
To Back of Control
17-1/2"
Cutout height
A
B
23-1/2"
Cutout depth
Advantium Wall Oven Dimensions (in inches)and
Cabinet Installation (in inches)
Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
Construct Solid
Bottom Min.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
Conduit
(48-1/2"
long)
19-1/8"
26-3/4"
PSB9100SF
GE Profile™ Series 27 in. Single Wall Oven with Advantium® Technology
Advantium wall oven/GE Profile™ Series cooking tower
dimensions and cabinet installation information (in inches)
Note: Cabinets
installed adjacent
to wall ovens must
have an adhesion
spec of at least a
194°F temperature
rating.
Note: 2" minimum
between cutouts
when installed
above warming
drawer or single
wall oven.
Installation
Information:
Before installing,
consult installation
instructions packed
with product for current
dimensional data.
Cabinet width
21-1/2"
To back
of Control
Conduit
(46" long)
19-1/8"
26-3/4"
A
B
A
B
4-3/16"
Junction box location
3" MIN between cutouts
recommended—2" MIN required
Construct Solid Bottom
MIN 3/8" Plywood Supported by
2 x 4 or 1 x 2 Runners, all Four Sides.
(Must Support 150 lbs. for Advantium)
(Must Support 200 lbs. for Wall Oven)
9-1/4" cutout height
28-1/2" cutout width
2" MIN between cutouts
For answers to your Monogram
appliance questions, visit our website at
geappliances.com or call GE Answer Center®
service, 800.626.2000.
1" Min. above toekick or adjust
to oven installation height
®
or GE®
(240-volt models only)
Suitable
bracing
to support
runners
C
L
21-5/8"
over centerline
of cabinet
(Must support 130 lbs.)
2x4’s or
equivalent
solid floor
Listed by
Underwriters
Laboratories
Specification Revised 7/14
PSB9100SF
GE Profile™ Series 27 in. Single Wall Oven with Advantium® Technology
Features and Benefits
• Speedcook oven (120) - Enjoy oven-quality results two to four times
faster than a conventional oven
• Multiple cooking functions - Expand your cooking versatility with an allin one oven
• Halogen heat - Skip the preheating with nearly instantaneous
halogen heat
• Over 175 preprogrammed menu selections - Preprogrammed selections
make meals easy
• Custom recipe saver - Conveniently store cooking instructions for up to
30 different recipes
• Model PSB9100SFSS – Stainless Steel
Specification Revised 7/14
Loading...