JD630SF
Acceptable Electrical Outlet
Area Also In Adjacent
Cabinet Or Under Floor
Conduit is 40" long
30" Min.
30" Min.
15" Min.
Recommended
6" Min.
from walls
30"
27-1/2"
25"
23-3/16"
If necessary,
build up sides
to 1-1/4" thick
to provide
countertop
support
28-1/2"
DROP-IN ELECTRIC RANGE
Acceptable Electrical Outlet
Area Also In Adjacent
Cabinet Or Under Floor
Conduit is 40" long
30" Min.
30" Min.
15" Min.
Recommended
6" Min.
from walls
Acceptable Electrical Outlet
Area Also In Adjacent
Cabinet Or Under Floor
Conduit is 40" long
30" Min.
30" Min.
15" Min.
Recommended
6" Min.
from walls
2-7/8"
To Front Surface
of Countertop
30"
27-1/2"
25"
23-3/16"
If necessary,
build up sides
to 1-1/4" thick
to provide
countertop
support
27"
20-5/8" Door
Clearance
From Front
Surface of
Countertop
24"
31-1/4"
28-1/2"
23-3/16"
30"
If you are NOT using the Filler strip:
Acceptable Electrical Outlet
Area Also In Adjacent
Cabinet Or Under Floor
Conduit is 40" long
30" Min.
30" Min.
15" Min.
Recommended
6" Min.
from walls
30"
27-1/2"
25"
23-3/16"
If necessary,
build up sides
to 1-1/4" thick
to provide
countertop
support
24"
31-1/4"
28-1/2"
GE Appliances 30" Drop-In Electric Range
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
JUNCTION BOX LOCATION: Electric drop-ins are not approved for
installation with a plug and receptacle. This range is supplied with a flexible
conduit and must be hard wired to a junction box. See shaded area in drawing for
location of junction box. Refer to installation instructions for more information.
IMPORTANT: 30" DROP-IN RANGES ARE DESIGNED TO HANG
FROM THE COUNTERTOP. IT DOES NOT REST ON THE FLOOR.
FOR INSTALLATION ALTERNATIVES, REFER TO INSTALLATION
INSTRUCTIONS.
NOTE: This appliance has been approved for 0" spacing to adjacent
surfaces above the cooktop. However, a 6" minimum spacing to surfaces less
than 15" above the cooktop and adjacent cabinet is recommended to reduce
exposure to steam, grease splatter and heat.
OPTIONAL KITS FOR DROP-IN ELECTRIC RANGES: (Available At
Additional Cost)
REAR FILLER STRIP:
If you are using the Filler strip:
WB07T10680 – Black Filler Strip Assembly
INS TA LLATI O N IN F O RMATI O N: Before
installing, consult installation instructions
for current dimensional data and additional
requirements.
†
NOTE: Check local codes for required
breaker size.
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
KW RATI N G
240V 11.9
208V 8.9
BREAKER SIZE
24 0V 40 Amps
208V 40 Amps
30"
25"
†
†
If you are NOT using the Filler strip:
23-3/16"
30"
Above illustration intended for dimensional reference only.
Refer to photograph for actual product appearance.
2-7/8"
To Front Surface
of Countertop
24"
20-5/8" Door
Clearance
From Front
Surface of
Countertop
31-1/4"
25-3/4"*
(excluding handle)
Dimension and installation information are shown in inches.
All GE ranges are equipped with
an Anti-Tip device. The installation
ADA
COMPLIANT
of this device is an important,
required step in the installation
of the range.
27"
*Total depth from wall to
front of closed oven door
including handle is 28-1/2"
Listed by
Underwriters
Laboratories
Speci fication Revised 4/18
JD630SF
GE Appliances 30" Drop-In Electric Range
FEATURES AND BENEFITS
6"/9" Power Boil element – Produces rapid, powerful heat
Self-clean oven – Cleans the oven cavity without the need for scrubbing
Ceramic glass cooktop – Smooth cooktop easily wipes clean
Black gloss oven interior – Enjoy a clean and sleek appearance
Dual element bake – Upper and lower elements produce even heat and
great results
Electronic oven controls – Electronic touch pads are easy to operate
Model JD630SFSS – Stainless steel
6:30
Speci fication Revised 4/18