GE GTWN4950DWS Specification

GTWN4950D

25-1/2

GE® 4.0 DOE cu. ft. stainless steel capacity washer

Dimensions and Installation Information (in inches)

Circuit Requirements: An individual, properly-grounded branch

circuit, with a three-prong grounding-type receptacle, protected by a 15 or 20 amp circuit breaker or a time-delay fuse, is required.

Electrical Rating: 115V, 60Hz, 10A

Note: Washer wall outlet must be located within 36” of service

code entry. Wall outlet must not be located behind dryer.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000.

Side View

Rear View

Specification Revised 3/13

Listed by Underwriters Laboratories

360112

GTWN4950D GE® 4.0 DOE cu. ft. stainless steel capacity washer

Features and Benefits

• ENERGY STAR® qualified/CEE Tier II —meets or exceeds federal guidelines for energy efficiency for year-round energy and money savings

• Infusor™ wash system uses HE detergent, requiring less water than a traditional topload washer

• Rotary electronic controls with cycle status lights provide accurate cycle times

• 16 wash cycles handle various fabrics and soils

• PreciseFill—washer will automatically measure the load size and add just the right amount of water

• Bleach and fabric softener dispensers automatically operate with wash cycle

• 700-RPM spin speed—fast spin speeds remove water efficiently and minimize dry times

• Model GTWN4950DWS – White on white

Specification Revised 3/13

360112