GE GTWN4250DWS User Manual
GTWN4250D
GE® 3.9 DOE cu. ft. stainless steel capacity washer
Dimensions and Installation Information (in inches)
Circuit Requirements: An individual, properly-grounded branch
circuit, with a three-prong grounding-type receptacle, protected
by a 15 or 20 amp circuit breaker or a time-delay fuse, is required.
Electrical Rating: 120V, 60Hz, 10A
Note: Washer wall outlet must be located within 36” of service
code entry. Wall outlet must not be located behind dryer.
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
36
25-1/2
Side View
27
HOT 17 1/2
COLD 16
4
51
42
Rear View
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
geappliances.com or call GE Answer Center®
service, 800.626.2000.
Listed by
Underwriters
Laboratories
Specification Revised 7/14
GTWN4250D
GE® 3.9 DOE cu. ft. stainless steel capacity washer
Features and Benefits
• 2013 ENERGY STAR® qualified - Meets or exceeds federal guidelines for energy
efficiency for year-round energy and money savings
• HydroWave® Quiet Agitator wash system - Longer, slower travel provides
gentle, thorough cleaning
• Electronic controls with cycle status lights provide accurate cycle times
• 16 wash cycles handle various fabrics and soils
• PreciseFill with the option of 5 water level selections will automatically measure
the load size and add just the right amount of water
• Bleach and fabric softener dispensers automatically operate with wash cycle
• 700-RPM spin speed - Fast spin speeds remove water efficiently and minimize
dry times
• Model GTWN4250DWS – White with silver backsplash
Modified Energy Factor (MEF)*
Water Factor (WF)*
*Certified by 10CFR-430 appendix J1
Specification Revised 7/14
2.0
6.0
Loading...