GE GTWN3000MWS Specification

GTWN3000M

Washers Profile

25-1/2

Washers Profile

25-1/2

Side View

Rear View

GE® 3.6 DOE cu. ft. stainless steel capacity washer

Dimensions and Installation Information (in inches)

Circuit Requirements: An individual, properly-grounded branch

circuit, with a three-prong grounding-type receptacle, protected by a 15 or 20 amp circuit breaker or a time-delay fuse, is required.

Electrical Rating:

120V, 60Hz

Washer Note:

Washer wall outlet must be located within 36" of service cord entry. Wall outlet must not be located behind dryer.

Installation Information: Before installing, consult installation instructions packed with your washer.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000.

Side View

Specification Revised 4/11

Listed by Underwriters Laboratories

360198

GTWN3000M GE® 3.6 DOE cu. ft. stainless steel capacity washer

Features and Benefits

• GentlePower™ agitator - Enjoy advanced cleaning results while reducing

normal wear and tear

• Rotary electromechanical controls - Easy-to-use controls make it simple

to set cycles

• 2 wash/spin speed combinations - Speeds are matched to fabric type for

great clothes care

• Multiple wash cycles - Multiple cycles are designed to specifically handle

various fabrics and soils

• Bleach and fabric softener dispensers - Solutions are automatically mixed with

wash water for bright, soft-to-the-touch results

• 630 RPM spin speed - Fast speeds remove more water during the spin cycle

to minimize drying time

• 3 Wash / Rinse Temperatures - Allow you to select the right temperature for

better wash results and longer fabric life

• 3 water levels - Allows user to match the water level to each load of wash

• Model GTWN3000MWS – White on white

Specification Revised 4/11

360198