GE GTWN2800D Specification

GTWN2800D GE® 3.8 DOE cu. ft. stainless steel capacity washer

Dimensions and Installation Information (in inches)

Circuit Requirements: An individual, properly-grounded branch

circuit, with a three-prong grounding-type receptacle, protected by a 15 or 20 amp circuit breaker or a time-delay fuse, is required.

Electrical Rating:

120V, 60Hz

Washer Note:

Washer wall outlet must be located within 36" of service cord entry. Wall outlet must not be located behind dryer.

Installation Information: Before installing, consult installation instructions packed with your washer.

25-1/2

Side View

HOT 17 1/2

COLD 16

Rear View

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000.

Specification Revised 2/15

Listed by Underwriters Laboratories

360115

GTWN2800D GE® 3.8 DOE cu. ft. stainless steel capacity washer

Features and Benefits

• Dual-Action agitator provides gentle, dual-wash action

• Rotary electromechanical controls make it simple to set cycles

• 13 wash cycles handle various fabrics and soils

• 5 water levels—select water level based on load size

• Bleach and fabric softener dispensers automatically operate with wash cycle

• Power Rinse - Optional deep-rinse cycle ensures clothes are rinsed of soap residue and fabric softener

• 630-RPM spin speed—fast spin speeds remove water efficiently and minimize dry times

• Model GTWN2800DWW – White

Modified Energy Factor (iMEF)*

Water Factor (iWF)*

*Certified by 10CFR-430 appendix J1

Specification Revised 2/15

8.4

5.5

360115