GE GTW810SPJMC, GTW810SSJWS Quick Reference Guide

Consumer Quick Reference Guide

This quick reference guide is provided for informational purposes only and does not replace, modify or change in any manner the Owner’s Manual or Installation Instructions.

STOP

DO NOT DISCARD. RETAIN FOR FUTURE USE.

Getting Started:

(Some features may only be available on some models)

Step 1: When not using SmartDispense

cups, add detergent to basket before loading. GE recommends using High Efficiency liquid or powder detergents such as Tide® HE 2x.

DO NOT put detergent packets in dispenser compartments.

detergent packets should only be added directly to the wash tub

Step 2: Loosely add items around Infusor NOTE: Overloading may negatively impact wash

performance and washer will not begin to FILL with lid open.

Step 3: Select wash cycle and adjust settings. Activate options like Fabric Softener when desired.

Step 4: Press Start

following the manufacturer’s directions.

or self-cleaning dispenser

Laundry

and close lid.

Water Level:

Thanks to the innovative wash action of this washer, it can operate with high-efficiency, using less water while still getting the load clean. Please expect the below water levels within your washer.

Clothes Level

Water Level

Average Small Load

Clothes Level

Water Level

Average Medium Load

Average Large Load

Clothes Level

Water Level

Washer Operation:

Normal operating steps of your GE High Efficiency Washer

Step 1 - : Once lid is closed and Start is pressed a short spray of water will

Step 2 – Lid Lock: Lid will lock, but can be unlocked by pressing the Pause or Unlock Lid button. Step 3 – Cycle Preparation:

Step 4 – Fill: Remaining water needed for the wash load will enter the basket. Step 5 – Wash: Washer will now begin to agitate back and forth turning over the load. A recirculating

Step 6 – Rinse: Soapy water will be removed from the basket by using one or two rinse options. The default

Step 7 – Spin: Remaining water will be extracted from the load during spin speeds of a 1000 rpm on

Functionality Check

enter the basket.

measuring load size and determining how much water is needed. Spinning and slight ocillation can be expected.

pump (available on some models) may also operate helping to distribute detergent and fully saturate load. The wash action may pause to allow the load to soak in soapy water.

rinse will cycle through 3 RainShower rinses with a spin between each one. If the Fabric Softener option is selected a deep fill rinse will be used.

selected models.

The basket spins with a dry load and then with a wet load. The washer is

Caring for your Washer:

Leave the lid open after washing to allow moisture to evaporate. Use a clean, soft cloth to clean surface of any spills. Run the BASKETClean cycle monthly using bleach or a washing

machine cleaner. (See Owner’s Manual for detailed instructions. To clean glass lid (on some models) use a clean, soft cloth with

vinegar and water solution.

Washer Warranty:

To schedule service visit us at GEAppliances.com or call 800.GE.CARES (800.423.2737)

For The Period Of: We Will Replace:

One Year

From the date of the original purchase

Proof or original purchase date is needed to obtain service under warranty.

Any factory specified part of the washer which fails due to a defect in materials or workmanship. During this Limited One-Year Warranty, we will also provide, free of charge, all labor and related service to replace the defective part.

49-90467-2 237D1510P001 04-13 GE