GE CSWONBLPWF1, CSWONBLTWF1 Installation Manual
™
Smart Wall Switch
Installation Guide
Toggle or Paddle
Models
CSWONBLPWF1
CSWONBLTWF1
WARNING: RISK OF ELECTRIC SHOCK
This product installation requires handling 120 volt wiring.
Follow each step carefully.
If any concerns handling wiring, hire a qualified electrician.
Ensure all work meets applicable local and national codes.
Simple DIY Setup
Install
your Smart
Switch
Download
the C by GE app
your Smart Switch to
Add
the C by GE app
Compatibility Requirements
Rating 120V AC 60Hz
Neutral wire is required
(Wire is usually white
or grey)
Ground wire is required
(Wire is usually green,
green with a yellow stripe,
or copper)
Wi-Fi 802.11 b/g/n @ 2.4 GHZ
is required
! IMPORTANT NOTE ON 3-WAY WIRING:
Some lights have one wall switch, while others are controlled by two or
more wal
top and bottom of the stairs). If your lights have more than one switch
(called a 3-way), we’ve created instructions for how to install and
enable the capability.
Visit cbyge.com/switch-support
for 3-way installation instructions and how-to-videos.
l switches (such as stair lights, which have a switch at both the
Works with halogen,
incandescent and LED bulbs,
including C by GE Smart
Bulbs.
LED up to 1.25 amps
Incandescent/halogen
up to 5 amps
Motor up to 1/4HP
Let’s Do It
INCLUDED
YOU’LL
NEED
Switch
Wall Plate 4 Wire Nut s
Line Load Neutral
Phillips Screwd river
Needle N ose Plier s
(recomme nded)
Voltage Tester
(recomme nded)
Ground
Wire Labe ls
4 Phillips
Mounti ng Screws
12
39
6
Approximately
30 minutes of yo ur day
to instal l and setu p
the switch
You Got This!
And we’re here to help.
For in-depth instructional videos
and a guided tour through the installation,
go to cbyge.com/switch-support.
BEFORE YOU DO ANYTHING: Step 1
Turn Off The Power!
1. Turn off the power for the switch location at the circuit breaker box.
2. Test existing switch by toggling switch on/off, ensuring lights do not turn on.
3. Now, follow these setup steps for a single gang switch.
ON OFF
Loading...