GE CSWONBLBWF1 Installation Manual

™

Smart Wall Switch
Installation Guide

On/Off Switch

Models
CSWONBLBWF1

WARNING: RISK OF ELECTRIC SHOCK

This product installation requires handling 120 volt wiring.
Follow each step carefully.
If any concerns handling wiring, hire a qualified electrician.
Ensure all work meets applicable local and national codes.

Simple DIY Setup

Install

your Smart

Switch

Download

the C by GE app

your Smart Switch to

Add

the C by GE app

Compatibility Requirements

Rating 120V AC 60Hz

Neutral wire is required
(Wire is usually white
or grey)

Ground wire is required
(Wire is usually green,
green with a yellow stripe,
or copper)

Wi-Fi 802.11 b/g/n @ 2.4 GHZ
is required

! IMPORTANT NOTE ON 3-WAY WIRING:
Some lights have one wall switch, while others are controlled by two or
more wal
top and bottom of the stairs). If your lights have more than one switch
(called a 3-way), we’ve created instructions for how to install and
enable the capability.

Visit cbyge.com/switch-support
for 3-way installation instructions and how-to-videos.

l switches (such as stair lights, which have a switch at both the

Works with halogen,
incandescent and LED bulbs,
including C by GE Smart
Bulbs.

LED up to 1.25 amps

Incandescent/halogen
up to 5 amps

Motor up to 1/4HP

Let’s Do It

INCLUDED

YOU’LL
NEED

Switch

Wall Plate 4 Wire Nut s

Line Load Neutral

Phillips Screwd river

Needle N ose Pliers

(recomme nded)

Voltage Tester

(recomme nded)

Ground

Wire Labe ls

4 Phillips

Mounti ng Screws

12

39

6

Approximately

30 minutes of yo ur day

to instal l and setup

the switch

You Got This!

And we’re here to help.
For in-depth instructional videos
and a guided tour through the installation,
go to cbyge.com/switch-support.

BEFORE YOU DO ANYTHING: Step 1

Turn Off The Power!

1. Turn off the power for the switch location at the circuit breaker box.

2. Test existing switch by toggling switch on/off, ensuring lights do not turn on.

3. Now, follow these setup steps for a single gang switch.

ON OFF