GE Choice Alert 45129, Choice Alert 45133 User Manual
45133
Choice
ALERT
Choice
ALERT
™
Control all Sensors
& accessories from
one location
™
Wireless Alarm System
Water Leak
Sensor
User’s Manual
2
3
Important Safeguards 4
Introduction
4-5
Installation 6
Assigning a Sensor to a Zone 7-8
Erasing a Sensor from a Zone
8-9
Testing a Sensor or your system 9-10
Low battery indicator 10
Battery warnings 11
F.A.Q.'S 12-13
FCC Warning 14
Table of Contents
3
Before connecting or operating the Water Leak
Sensor, please read these instructions carefully and
save this manual for future reference.
Congratulations
The GE Choice Alert™ Wireless Alarm System is one
of the most affordable and expandable wireless
alarm systems available. You’ll discover that the
system offers many features typically found in custom
installed Alarm systems.
The Choice Alert system is reliable and easy-to-use.
With Choice Alert you can select from a line of Sensors
and Accessories; start small and expand as you
need, or create a system that meets all your needs.
The Choice Alert System is protected by Priority
Code Selection technology which provides increased
security and trouble-free wireless connections. It
also guarantees the Control Center will only respond
to signals from your Sensors in and around your home,
and prevents anyone from tampering with
your system.
The user manual explains in simple steps how to
install, use and care for your new Choice Alert
Water Leak Sensor.
If you have any questions or would like
additional information please visit our web site
www.jascoproducts.com, or contact our
Customer Service Group at 1-800-654-8483.
4
5
Important safeguards
Pre Cautions
1. Do not attempt to disassemble the Water Leak
Sensor, unless described in the user’s manual. There
are no user serviceable parts.
2.
Handle with Care – Avoid striking or shaking.
Improper use or storage could damage the Water
Leak Sensor. Modifying or tampering the device or its
internal components can cause a malfunction and
void the Water Leak’s warranty.
3.
If you feel the Water Leak Sensor or any part of
the Choice Alert system is not operating correctly or
as described, please contact Customer Service for
assistance (1-800-654-8483).
Introduction
The Water Sensor is designed to be used in areas
where there is a potential for damaging water
leaks – dishwashers, washing machines, hot water
tanks, air conditioner condensation drip pans, etc.
When mounted properly it can monitor whether
water is leaking into areas that could be damaged.
5
When water is detected, the Sensor will transmit
a signal to the Control Center. The settings on the
Control Center determine if an alarm, alert or chime
sounds (see Control Center Operation). The Water Leak
Sensor is recommended for use on Zone 4, the alertonly Zone. If there is a leak, Zone will not sound an
alarm but will sound a continuous alert until leak has
stopped and water has dissipated.
Parts Check List
Identify all the parts before proceeding.
2 - Screws
2 - Double sided tape
Water Leak Sensor
Probe
Mounting plate
2 - Plastic anchors
Loading...