GE 45132 - Choice-Alert Wireless Motion Sensor Alarm, Choice Alert 45132 System User Manual

45132

Choice

ALERT

Choice

ALERT

™

Control all Sensors
& accessories from
one location

™

Wireless Alarm System

Motion
Sensor

User’s Manual

2

Important Safeguards 4

Introduction 5

Assigning a Sensor to a Zone 6-7

Testing a Sensor or your system 7-8

Installation 8

Erasing a Sensor from a Zone 8-9

Low battery indicator 10

Battery warnings 11

F.A.Q.'S 12-13

FCC Warning 14

Table of Contents

3

Before connecting or operating the Motion Sensor,
please read these instructions carefully and save
this manual for future reference.

Congratulations

The GE Choice Alert™ Wireless Alarm System is one
of the most affordable and expandable wireless
alarm systems available. You’ll discover the system
offers many features typically found in custom
installed Alarm systems.

The Choice Alert system is reliable and easy-to-use.
With Choice Alert you can select from a line of Sensors
and Accessories; start small and expand as you
need, or create a system that meets all your needs.
The Choice Alert System is protected by Priority
Code Selection technology which provides increased
security and trouble-free wireless connections. It
also guarantees the Control Center will only respond
to signals from your Sensors in and around your home,
and prevents anyone from tampering with
your system.

The user manual explains in simple steps how to
install, use and care for your new Choice Alert
Motion Sensor.

If you have any questions or would like
additional information please visit our web site
www.jascoproducts.com, or contact our
Customer Service Group at 1-800-654-8483.

4

Important safeguards

PreCautions

1. Do not attempt to disassemble the Motion Sensor,
unless described in the user’s manual. There are no
user serviceable parts.

2.

Handle with Care – Avoid striking or shaking.
Improper use or storage could damage the Motion
Sensor. Modifying or tampering the device or its
internal components can cause a malfunction and
void the Motion Sensor’s warranty.

3. If you feel the Motion Sensor or any part of the
Choice Alert system is not operating correctly or
as described, please contact Customer Service for
assistance (1-800-654-8483).

5

Introduction

The Motion Sensor is designed to be used indoors or
out. When mounted properly it can monitor large or
open areas such as entrances, living rooms, family
rooms, driveways, backyards, walkways, workshops,
etc. When the Sensor detects motion, it will transmit
a signal to the Control Center. The Zone selection and
settings on the Control Center determine if an alarm or
an alert sounds.

Parts Check List

Identify all the parts before proceeding.

Ball-head joint

Motion Sensor
with mounting bracket

2 - Screws

2 - Plastic anchors